{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FK2204-5AF00-2SB0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FK2204-5AF00-2SB0","canonicalUrl":"https://aoctrl.com/siemens/1FK2204-5AF00-2SB0","factsUrl":"https://aoctrl.com/api/mcp/products/1FK2204-5AF00-2SB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 1FK2204-5AF00-2SB0 SIMOTICS S-1FK2 CT servo motor for SINAMICS S120, M0=2.4 Nm, PN=0.75 kW at nN=3000 rpm (380-480 V), PN=0.375 kW at nN=1500 rpm (200-240 V), IP64, AS22DQC 22-bit single-turn encoder, DRIVE-CLiQ plug M17.","salesMarkdown":"## 2.4 Nm stall, 0.75 kW at 3000 rpm — what the headline numbers mean The Siemens 1FK2204-5AF00-2SB0 is a SIMOTICS S-1FK2 CT synchronous servo from the 1FK2 family built for SINAMICS S120 drives, with a stall torque M0 of 2.4 Nm and a rated power PN of 0.75 kW at nN=3000 rpm on a 380-480 V supply, switching to PN=0.375 kW at nN=1500 rpm when the line drops to 200-240 V. That dual-rail rating matters on retrofit machines imported from a 480 V plant to a 240 V European feed — the motor still has a usable 0.375 kW point rather than falling off the curve. The shaft is a plain cylinder D14 x 30 mm and the housing carries IP64 protection — that is dust-tight and splash-resistant from any direction, fine for a control cabinet interior or a clean machine frame, but not a washdown-rated body for food-and-beverage conveyors. If the motor ends up on a wet end of line, step up to an IP65/IP67 variant in the same 1FK2 frame rather than sealing around this one. ## DRIVE-CLiQ M17 + AS22DQC encoder — how it talks to the drive Feedback is a 22-bit single-turn absolute encoder (AS22DQC) and the motor carries a DRIVE-CLiQ plug M17 — the digital encoder interface that auto-identifies the motor on the SINAMICS S120 and loads the electronic nameplate into the drive without manual parameter entry. For a commissioning tech that means no typing of pole count, resolver offset, or encoder resolution — the drive reads it on first power-up, and a swapped motor on a service call re-identifies the same way. The power connector is a size M17 plug on the motor side, matched to the SINAMICS S120 power cable family — the cable is ordered separately against the motor frame, and the pinout is keyed so the power and signal halves cannot be cross-mated. The DRIVE-CLiQ side uses a separate M17 signal connector so the encoder cable and power cable are physically distinct runs back to the drive. ## Lifecycle, build-to-order class, and compliance paperwork The 1FK2204-5AF00-2SB0 is listed as a current production part, and the product class is C — built to order, non-returnable, non-reusable — so stock at Siemens is not a thing; every order goes through the configured-to-order pipeline with a fresh serial. That is the standard posture for servo motors in this frame, and it explains why an MRO planner typically holds a spare on the shelf rather than relying on next-day factory shipment. Compliance footprint: RoHS conformity since 01-07-06 and REACH Art. 33 duty-to-inform on the current candidate list. Export control is AL:N / ECCN:N_CNDU — no licence required for the standard commercial destination. The carton ships at 452.00 x 250.00 x 267.00 mm, one piece per package, which is roughly the volume a bench tech should expect on receipt.","metaTitle":"Siemens 1FK2204-5AF00-2SB0 SIMOTICS S-1FK2 servo, 0.75 kW","metaDescription":"Siemens 1FK2204-5AF00-2SB0 SIMOTICS S-1FK2 CT servo motor, 2.4 Nm M0, 0.75 kW at 3000 rpm (380-480 V), IP64, AS22DQC encoder, DRIVE-CLiQ M17. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FK2204-5AF00-2SB0","Group Code":"R220","description":"SIMOTICS S-1FK2 CT servo motor M0=2.4 Nm; PN = 0.75 kW at nN=3000 rpm (380-480 V); PN = 0.375 kW at nN=1500 rpm (200-240 V); degree of protection IP64; cylindrical shaft D14 x 30 mm; absolute encoder single-turn 22-bit (encoder AS22DQC); with DRIVE-CLiQ plug M17; power connector size M17;","Product Group":"9021","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FK2 servomotors for SINAMICS S120","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N_CNDU","Packaging dimensions (L x W x H)":"452.00 x 250.00 x 267.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-07-06","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/48da71cdd04d394b69b65502f8e711c1.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FK2204-5AF00-2SB0?tree=CatalogTree"},"ai":{"faq":[{"question":"How do I get current pricing and availability for 1FK2204-5AF00-2SB0?","answer":"Submit an RFQ with the quantity and any configured options; current pricing and confirmed availability are returned at quote time against the factory build slot. Stock-on-shelf claims do not apply to this build-to-order class C motor — the answer is always the quoted lead time at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FK2204-5AF00-2SB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FK2204-5AF00-2SB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}