{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FK2204-5AF10-0SA0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FK2204-5AF10-0SA0","canonicalUrl":"https://aoctrl.com/siemens/1FK2204-5AF10-0SA0","factsUrl":"https://aoctrl.com/api/mcp/products/1FK2204-5AF10-0SA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 1FK2 series SIMOTICS S-1FK2 CT servo motor, 0.75 kW at 3000 rpm, 2.4 Nm standstill torque, with holding brake, IP64, M17 plug, for SINAMICS S210 drive system.","salesMarkdown":"## 0.75 kW CT servo with holding brake on the SINAMICS S210 bus The Siemens 1FK2204-5AF10-0SA0 is a SIMOTICS S-1FK2 CT servo motor built for pairing with a SINAMICS S210 drive, with standstill torque M0 of 2.4 Nm and a rated output PN of 0.75 kW at nN of 3000 rpm from a 380-480 V supply. On the lower-voltage 200-240 V rail the same frame drops to 0.375 kW at 1500 rpm, which is the rating to budget for if the cabinet feeds single-phase 230 V rather than a 400 V three-phase feed. It ships with an integrated holding brake, an absolute single-turn 22-bit encoder (AS22DQC), and a rotatable M17 plug — meaning the feedback cable and power lead can be dressed to either side of the motor without rewiring the cabinet, a small but real gain on a packaging or bottling line where the motor sits in a tight envelope. ## Shaft, sealing, and feedback — what the spec line means on the line The cylindrical shaft is D19x40 mm with an IP64 degree of protection, so the body is dust-tight and resists splashed water from any direction — fine for a typical skid inside an enclosure, but not a washdown-rated food-zone motor; if the line gets sprayed, look higher up the 1FK2 catalogue. The single-turn 22-bit encoder resolves position to roughly 0.00017 degrees per count — plenty for point-to-point indexing on a conveyor or filler where the S210 drive is doing the closed-loop torque and velocity work over the OCC interface, with the absolute feedback avoiding a homing move on every power-up. ## Order code is build-to-order, not shelf stock This order code carries Product class C — built to order, non-returnable, non-reusable against credit — which is Siemens' way of saying each motor is configured at the factory for the encoder, brake, shaft, and connector combination you see on the label, and the order is final once placed. For procurement that translates into a longer planning window than a stocked distributor item, so lead time and quantity pricing are confirmed at RFQ rather than promised off the shelf. Lifecycle reads active under the current production stage, with Group Code R220 and Product Group 9021 identifying the motor inside Siemens' ordering structure; no official successor or second-source cross-reference is published against this specific 1FK2204-5AF10-0SA0 configuration. ## Compliance posture on the data sheet RoHS compliance has been in force since 01-07-06 and REACH Art. 33 candidate-list information is provided via Siemens' Reach Information page, so the part clears the substance-restriction gate for shipment into the EU. Export control is AL:N / ECCN:N_CNDU, which means no licence is required for typical commercial export channels.","metaTitle":"Siemens 1FK2204-5AF10-0SA0 Servo Motor, 0.75 kW, Brake","metaDescription":"Siemens 1FK2204-5AF10-0SA0 SIMOTICS 1FK2 servo motor with holding brake, 0.75 kW at 3000 rpm, IP64, SINAMICS S210 family.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"1FK2204-5AF10-0SA0","Group Code":"R220","description":"SIMOTICS S-1FK2 CT servo motor M0=2.4 Nm; PN = 0.75 kW at nN=3000 rpm (380-480 V); PN = 0.375 kW at nN=1500 rpm (200-240 V); with holding brake; degree of protection IP64; cylindrical shaft D19x40mm; absolute encoder single-turn 22-bit (encoder AS22DQC); with OCC interface; plug size M17, rotatable;","Product Group":"9021","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FK2 servomotors for SINAMICS S210","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N_CNDU","Packaging dimensions (L x W x H)":"452.00 x 250.00 x 267.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-07-06","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/0eaed446c73e20f7da115c8dc61412e4.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FK2204-5AF10-0SA0?tree=CatalogTree"},"ai":{"faq":[{"question":"Is 1FK2204-5AF10-0SA0 available via RFQ confirmation and what is the lead time for an order?","answer":"Lead time tracks Siemens' configured-motor build window and the quantity on the BOM."},{"question":"What compliance documentation does Siemens provide for 1FK2204-5AF10-0SA0?","answer":"RoHS compliance has been declared since 01-07-06 and REACH Art. 33 candidate-list information is supplied through Siemens' Reach Information channel; export classification is AL:N / ECCN:N_CNDU."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FK2204-5AF10-0SA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FK2204-5AF10-0SA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}