{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FK2204-5AF10-1MB0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FK2204-5AF10-1MB0","canonicalUrl":"https://aoctrl.com/siemens/1FK2204-5AF10-1MB0","factsUrl":"https://aoctrl.com/api/mcp/products/1FK2204-5AF10-1MB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 1FK2204-5AF10-1MB0, SIMOTICS S-1FK2 CT servo motor, 2.4 Nm, 0.75 kW at 3000 rpm, with holding brake, DRIVE-CLiQ M17, IP64.","salesMarkdown":"## Servo sizing for a 0.75 kW axis The 1FK2204-5AF10-1MB0 is a SIMOTICS S-1FK2 CT servo motor from the 1FK2 family targeted at SINAMICS S120 drives, sized at M0 = 2.4 Nm standstill torque with a rated point of PN = 0.75 kW at nN = 3000 rpm on a 380-480 V bus, and a second operating point of PN = 0.375 kW at nN = 1500 rpm on a 200-240 V bus. The dual operating-point listing is the engineering tell: one stator, two inverter line-voltage regions, so a designer can standardise the motor across both European 400 V and North American 230 V cabinets without changing the mechanics. Encoder side is an absolute 22-bit single-turn plus 12-bit multiturn (AM22DQC) brought back over a DRIVE-CLiQ M17 plug, which is the cleanest path into a SINAMICS S120 topology — the drive auto-detects the motor and pulls the electronic nameplate, so the DC sync starts in the right place rather than being hand-tuned axis by axis. ## Mechanical and holding-brake fit Shaft is D19 x 40 mm with a feather key, and the body carries an IP64 degree of protection — adequate for cabinet-internal mounting and light dust exposure, but not for washdown. The shaft keyway is the load-side decision: keyed shafts handle higher shock loads and reversing duty better than smooth or friction-fit shafts of the same diameter, at the cost of a small backlash on position-controlled axes. An integrated holding brake is fitted — the practical effect is that a vertical axis can hold position with the drive de-energised at standstill, which is what most packaging, pick-and-place, and small-format converting lines need. The brake is wired through the same M17 power connector, so no separate brake cable run is required at the panel. ## Lifecycle status and BOM posture Group Code R220 and Product Group 9021 are the internal classification keys a Siemens planner uses for quotation and lead-time confirmation. Product class is C — built to order, non-returnable, non-reusable against credit — which is the standard posture for configured servomotors and means each unit is built against the order rather than pulled from a generic shelf. ## Compliance paperwork that travels with the motor RoHS substance-restriction compliance is recorded since 01-07-06, and REACH Article 33 candidate-list duty-to-inform applies with the standard Reach Information disclosure. Export-control markings are AL: N / ECCN: N_CNDU — no export licence trigger for the usual destinations, which simplifies cross-border shipment paperwork. ## Sourcing posture Packaging is one piece per shipper at 452 x 250 x 267 mm — a single-motor carton size typical for this frame, not a multi-pack.","metaTitle":"Siemens 1FK2204-5AF10-1MB0 Servo Motor, 0.75 kW, with Brake","metaDescription":"Siemens 1FK2204-5AF10-1MB0 SIMOTICS S-1FK2 CT servo motor, 0.75 kW at 3000 rpm, 2.4 Nm, with holding brake and DRIVE-CLiQ interface. Active; quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"1FK2204-5AF10-1MB0","Group Code":"R220","description":"SIMOTICS S-1FK2 CT servo motor M0=2.4 Nm; PN = 0.75 kW at nN=3000 rpm (380-480 V); PN = 0.375 kW at nN=1500 rpm (200-240 V); with holding brake; degree of protection IP64; shaft D19x40 mm with feather key; absolute encoder 22-bit + 12-bit multiturn (encoder AM22DQC); with DRIVE-CLiQ plug M17; power connector size M17;","Product Group":"9021","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FK2 servomotors for SINAMICS S120","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N_CNDU","Packaging dimensions (L x W x H)":"452.00 x 250.00 x 267.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-07-06","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/462fd5ec51c0a68ab7eb846e2d2911d2.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FK2204-5AF10-1MB0?tree=CatalogTree"},"ai":{"faq":[{"question":"What is the listed group code and product group for 1FK2204-5AF10-1MB0?","answer":"Group Code is R220 and Product Group is 9021 on this servo-motor line — these are the Siemens internal classification keys used for quotation and lead-time confirmation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FK2204-5AF10-1MB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FK2204-5AF10-1MB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}