{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FK2204-5AK00-2MB0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FK2204-5AK00-2MB0","canonicalUrl":"https://aoctrl.com/siemens/1FK2204-5AK00-2MB0","factsUrl":"https://aoctrl.com/api/mcp/products/1FK2204-5AK00-2MB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 1FK2 series SIMOTICS S-1FK2 CT servo motor, 2.4 Nm M0, 0.75 kW PN, 6000 rpm nN, IP64, DRIVE-CLiQ interface, 22-bit + 12-bit multiturn absolute encoder AM22DQC.","salesMarkdown":"## Definition and drive-family placement The 1FK2204-5AK00-2MB0 is a SIMOTICS S-1FK2 CT servomotor from the 1FK2 product family, sized for the SINAMICS S120 drive platform — the low-inertia CT (Compact) rotor is the choice for highly dynamic point-to-point moves where acceleration and braking torque outweigh absolute continuous-torque density. Constructionally it is a compact servomotor with cylindrical shaft D14 x 30 mm, IP64 sealing on the body, and the DRIVE-CLiQ M17 feedback connector carrying the AM22DQC absolute encoder (22-bit singleturn + 12-bit multiturn) directly to the SINAMICS controller — no external encoder cable, no parameterisation of third-party feedback devices. ## Headline ratings and what they decide on the BOM line Stall torque M0 is 2.4 Nm with a rated power of 0.57 kW at nN=6000 rpm on a 380-480 V supply, or 0.75 kW at nN=3000 rpm on a 200-240 V supply — the lower voltage winding is specified for 200-240 V cabinets and the higher for 380-480 V; specifying the wrong mains range derates the motor below its published curve. The current-loop clock is locked at 8 kHz / 62.5 µs, which is the only operating point Siemens publishes for this code — pairing it with a SINAMICS S120 block configured for a different pulse frequency forces a de-rating or a drive-fault at commissioning. IP64 ingress protection seals the body against splashing water and dust ingress — the motor is built for an industrial cabinet or machine interior where condensation and direct washdown are not present; it is not the right IP class for food-and-bev lines or outdoor pedestal mounting. ## Compliance and tender traceability RoHS compliance has been in force since 01-07-06 and REACH Article 33 information is maintained against the current candidate list — both are evidenced in the official record and satisfy the substance-restriction clauses normally required in EU public-sector tenders. Export Control Regulations carry AL:N and ECCN:N_CNDU, so the motor is not on a dual-use or arms-control list and can be shipped without an export licence under standard commercial terms — a useful line item for procurement audit trails. Group Code R220 and Product Group 9021 are the administrative identifiers a tender response would quote alongside the order code for traceability into Siemens' product master. ## Production status and order-class Lifecycle stage is recorded as current and the order is classified Product class C — manufactured/produced to order, not re-usable and not returnable against credit, which is the standard Siemens position for configured 1FK2 servomotors. Supplied singly (quantity unit 1 piece, packaging quantity 1) in a 452 x 250 x 267 mm carton — single-unit packaging is normal for a configured servo and the BOM line therefore commits in single-piece increments.","metaTitle":"Siemens 1FK2204-5AK00-2MB0 servo motor, 0.75 kW, IP64","metaDescription":"Siemens 1FK2204-5AK00-2MB0 SIMOTICS S-1FK2 CT servo motor, 0.57 kW at 6000 rpm (380-480 V) or 0.75 kW at 3000 rpm (200-240 V), absolute encoder AM22DQC","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FK2204-5AK00-2MB0","Group Code":"R220","description":"SIMOTICS S-1FK2 CT servo motor M0=2.4 Nm; PN = 0.57 kW at nN=6000 rpm (380-480 V); PN = 0.75 kW at nN=3000 rpm (200-240 V); degree of protection IP64; cylindrical shaft D14 x 30 mm; absolute encoder 22-bit + 12-bit multiturn (encoder AM22DQC); with DRIVE-CLiQ plug M17; power connector size M17; only for 8 kHz / 62.5 µs;","Product Group":"9021","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FK2 servomotors for SINAMICS S120","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N_CNDU","Packaging dimensions (L x W x H)":"452.00 x 250.00 x 267.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-07-06","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ea53bf9e7f80e19264b51fcf049ee1f3.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FK2204-5AK00-2MB0?tree=CatalogTree"},"ai":{"faq":[{"question":"What compliance documentation does Siemens provide for 1FK2204-5AK00-2MB0 (RoHS, REACH)?","answer":"RoHS compliance is recorded since 01-07-06 and REACH Article 33 information is maintained against the current candidate list — both are evidenced in the official product master for tender submission."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FK2204-5AK00-2MB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FK2204-5AK00-2MB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}