{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FK2204-5AK01-1SB0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FK2204-5AK01-1SB0","canonicalUrl":"https://aoctrl.com/siemens/1FK2204-5AK01-1SB0","factsUrl":"https://aoctrl.com/api/mcp/products/1FK2204-5AK01-1SB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 1FK2204-5AK01-1SB0 SIMOTICS S-1FK2 CT servo motor, M0 = 2.4 Nm, PN = 0.57 kW at nN = 6000 rpm (380-480 V), IP65, DRIVE-CLiQ, single-turn 22-bit encoder AS22DQC.","salesMarkdown":"## What lands on the bench when this code is opened The 1FK2204-5AK01-1SB0 is a SIMOTICS S-1FK2 CT servo motor sized for SINAMICS S120 — a compact synchronous unit rated M0 = 2.4 Nm with PN = 0.57 kW at nN = 6000 rpm on a 380-480 V bus, and PN = 0.75 kW at nN = 3000 rpm on a 200-240 V bus. The shaft is D19x40 mm with a feather key, the absolute encoder is single-turn 22-bit (AS22DQC), and both feedback and power exit through M17 connectors with a DRIVE-CLiQ plug. Because the rating is locked to 8 kHz / 62.5 µs current-controller cycles, the drive side has to be parameterized to that pulse pattern — bolting it to a default 4 kHz profile will not deliver the rated torque. Holding torque of 2.4 Nm puts it in the low-inertia compact class used on small packaging, pick-and-place, and feed-axes where the load inertia is a fraction of the rotor — anything heavier than roughly a 5:1 ratio wants a gearbox or a frame up. The IP65 rating on the housing and the M17 connector family keep the motor sealed against coolant mist and washdown residue typical of these lines, which is the deployment context this frame was designed into rather than a clean-room assembly cell. ## Series, codes, and compliance pack The motor sits inside the 1FK2 family for SINAMICS S120 drives, listed under Group Code R220 and Product Group 9021 — useful filters when pulling this part out of the Siemens configurator or matching it against a BOM line that already carries those codes. Compliance carries RoHS conformity since 01-07-06 and a current REACH Art. 33 candidate-list disclosure; export classification is AL:N / ECCN:N_CNDU, so the part ships without an export-license gate in most jurisdictions. Production status is active per the lifecycle record. The product class is non-returnable / non-reusable (class C) — it is built to order, so any kit pulled for a line-down spare needs the full order code committed up front, not a generic 1FK2 substitute drawn from shelf stock. ## Handling footprint and what ships in the carton Packaging is one piece per carton with outer dimensions of 452 x 250 x 267 mm — the motor itself is compact, but the shipper box is sized for the encoder-protective foam and the connector caps, so the receiving dock needs to plan floor space accordingly. The carton is not field-recoverable once opened: the part class designation means returns against credit are not accepted, which is worth flagging in the receiving SOP before the unit goes into stores.","metaTitle":"Siemens 1FK2204-5AK01-1SB0 SIMOTICS S-1FK2 Servo Motor","metaDescription":"Siemens 1FK2204-5AK01-1SB0 SIMOTICS S-1FK2 CT servo motor, 0.57 kW, IP65, DRIVE-CLiQ. Active production, sourced to order; quote at RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FK2204-5AK01-1SB0","Group Code":"R220","description":"SIMOTICS S-1FK2 CT servo motor M0=2.4 Nm; PN = 0.57 kW at nN=6000 rpm (380-480 V); PN = 0.75 kW at nN=3000 rpm (200-240 V); degree of protection IP65; shaft D19x40 mm with feather key; absolute encoder single-turn 22-bit (encoder AS22DQC); with DRIVE-CLiQ plug M17; power connector size M17; only for 8 kHz / 62.5 µs;","Product Group":"9021","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FK2 servomotors for SINAMICS S120","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N_CNDU","Packaging dimensions (L x W x H)":"452.00 x 250.00 x 267.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-07-06","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a9bbbc5f9e7992890460f88e2365ea6d.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FK2204-5AK01-1SB0?tree=CatalogTree"},"ai":{"faq":[{"question":"Where can I buy 1FK2204-5AK01-1SB0 and how do I get a price?","answer":"Because the unit is built to order under product class C, expect a configured lead time rather than same-day shipment."},{"question":"What is 1FK2204-5AK01-1SB0's listed group code and product group?","answer":"Group Code is R220 and Product Group is 9021, both pulled from the Siemens catalog line for this motor. Those codes are the right filters to apply when cross-checking the part inside the Siemens configurator or matching it against an existing BOM row."},{"question":"What compliance documentation comes with 1FK2204-5AK01-1SB0?","answer":"Compliance covers RoHS conformity since 01-07-06, a current REACH Art. 33 candidate-list disclosure (Reach Information), and export classification AL:N / ECCN:N_CNDU. UL and IEC certification entries are not part of this spec line — those approvals need to be confirmed against the project file before specifying into a UL-listed panel build."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FK2204-5AK01-1SB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FK2204-5AK01-1SB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}