{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FK2204-5AK10-0MB0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FK2204-5AK10-0MB0","canonicalUrl":"https://aoctrl.com/siemens/1FK2204-5AK10-0MB0","factsUrl":"https://aoctrl.com/api/mcp/products/1FK2204-5AK10-0MB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 1FK2 SIMOTICS S-1FK2 CT servo motor, 2.4 Nm, 0.75 kW at 3000 rpm, with holding brake, IP64, DRIVE-CLiQ M17, for SINAMICS S120.","salesMarkdown":"## Headline rating and what it means on this shaft The 1FK2204-5AK10-0MB0 is a SIMOTICS S-1FK2 CT servo motor rated M0 = 2.4 Nm continuous stall torque, with two power windows on the nameplate: 0.57 kW at nN = 6000 rpm on a 380–480 V drive bus, and 0.75 kW at nN = 3000 rpm on a 200–240 V drive bus — so the same frame delivers the higher nameplate kW at the lower-voltage window because the speed ceiling drops with the drive bus. It belongs to the 1FK2 family built for the SINAMICS S120 drive platform, which is the relevant point if the panel builder is already running an S120 line module — this motor plugs into that ecosystem through its DRIVE-CLiQ M17 feedback connector rather than a third-party resolver cable. ## Mechanical fit, encoder, and current loop The motor ships with a holding brake, IP64 protection, and a cylindrical D19 x 40 mm shaft — the IP64 rating means dust-tight and splash-proof, fine for inside an enclosure or a sheltered machine frame, not for hosed-down food-and-bev cells. Feedback is an absolute encoder AM22DQC at 22-bit single-turn + 12-bit multiturn resolution, which gives absolute position retention across power cycles without a battery box on the machine — relevant where the application needs the axis to know its home on first enable, not after a homing run. The motor is rated for use only at 8 kHz / 62.5 µs current controller cycle, so when commissioning on SINAMICS S120 the p0115 sampling must be locked to that figure — dropping it to 4 kHz to match an older motor on the line will move the torque ripple and the thermal model off their rated points. ## Compliance and product-class posture The product class is C — produced to order, non-returnable, non-reusable — and the quantity unit is one piece, so a single BOM line ties up a build slot that cannot be credited back if the spec drifts mid-project. Group code R220 / product group 9021 are the administrative codes used on the Siemens price list and shipping documents — useful when matching the PO line against the packing slip and the customs declaration, not selection parameters on their own.","metaTitle":"Siemens 1FK2204-5AK10-0MB0 Servo Motor, 0.75 kW, w/ Brake","metaDescription":"Siemens 1FK2204-5AK10-0MB0 SIMOTICS 1FK2 servo motor, 2.4 Nm, 0.75 kW at 3000 rpm, with holding brake and DRIVE-CLiQ. Active, quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"1FK2204-5AK10-0MB0","Group Code":"R220","description":"SIMOTICS S-1FK2 CT servo motor M0=2.4 Nm; PN = 0.57 kW at nN=6000 rpm (380-480 V); PN = 0.75 kW at nN=3000 rpm (200-240 V); with holding brake; degree of protection IP64; cylindrical shaft D19x40mm; absolute encoder 22-bit + 12-bit multiturn (encoder AM22DQC); with DRIVE-CLiQ plug M17; power connector size M17; only for 8 kHz / 62.5 µs;","Product Group":"9021","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FK2 servomotors for SINAMICS S120","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N_CNDU","Packaging dimensions (L x W x H)":"452.00 x 250.00 x 267.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-07-06","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/ddaeac5c5f53956ae55c219ac6a41ff3.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FK2204-5AK10-0MB0?tree=CatalogTree"},"ai":{"faq":[{"question":"What is the group code and product group for the 1FK2204-5AK10-0MB0?","answer":"Group code R220 and product group 9021 on this servo motor line."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FK2204-5AK10-0MB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FK2204-5AK10-0MB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}