{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FK2204-5AK10-0SA0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FK2204-5AK10-0SA0","canonicalUrl":"https://aoctrl.com/siemens/1FK2204-5AK10-0SA0","factsUrl":"https://aoctrl.com/api/mcp/products/1FK2204-5AK10-0SA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 1FK2204-5AK10-0SA0 SIMOTICS S-1FK2 CT servo motor with holding brake, 0.57 kW at 6000 rpm (380-480 V) / 0.75 kW at 3000 rpm (200-240 V), IP64, AS22DQC single-turn encoder, M17 plug, for SINAMICS S210.","salesMarkdown":"## What this motor is and where it sits in the SINAMICS S210 line The 1FK2204-5AK10-0SA0: The part is a SIMOTICS S-1FK2 CT servo motor built for the SINAMICS S210 drive family, frame code R220 in product group 9021, and the catalog lists it as class C — built to order, non-returnable, so every line on the BOM has to be confirmed against an actual RFQ rather than pulled from generic stock. Rated torque M0 = 2.4 Nm with two power points on the nameplate: 0.57 kW at nN = 6000 rpm on the 380-480 V supply and 0.75 kW at nN = 3000 rpm on the 200-240 V supply. That dual rating is the practical decision point — the same motor mechanically, but the S210 drive sizing and the line-supply feed change between a 400 V European cabinet and a 230 V North American build. ## Holding brake, encoder, and the panel-side wiring face It ships with a holding brake — the holding torque should be sized against the vertical-axis load it has to lock at standstill, not against the motor's continuous torque — and the feedback side is an absolute single-turn 22-bit encoder AS22DQC delivered over the OCC interface. Single-turn absolute is the right call for point-to-point motion where the drive homes on power-up; if the application needs retention across power cycles, the 1FK2 multi-turn variant in the same mechanical frame is the sibling to spec instead. The shaft end is a plain cylindrical D19 × 40 mm stub and the power/feedback connector is an M17 rotatable plug — rotatable matters at panel-build because the harness lay can be rotated to the cable-tray side without reorienting the motor on the gearbox. Degree of protection IP64 means the body tolerates dust and splashing from any direction but is not rated for washdown; a hygienic or outdoor-exposed axis needs a higher-IP variant from the 1FK2 family. ## Lifecycle, compliance, and what the BOM line actually costs Lifecycle stage reads current on the order record and the product status is Active — the part is not on a last-time-buy clock, but the class-C build-to-order designation is the caveat: production quantities are scheduled against the order, not pulled from a finished-goods buffer, so quote lead time and not shelf availability is what drives the delivery date. On compliance the record is plain: RoHS conformity since 01-07-06, REACH Art. 33 duty-to-inform against the current candidate list, and export classification AL:N / ECCN:N_CNDU — no special license gate for cross-border shipment into the usual industrial markets, and the substance-restriction posture is current as of the record date. Each unit ships one per package in a 452 × 250 × 267 mm carton, so inbound handling is a single-piece lift and the receiving dock can plan around a motor-and-brake crate rather than a multi-up pack.","metaTitle":"Siemens 1FK2204-5AK10-0SA0 SIMOTICS S-1FK2 servo, 0.57 kW","metaDescription":"Siemens 1FK2204-5AK10-0SA0 SIMOTICS S-1FK2 CT servo motor, 0.57 kW at 6000 rpm (380-480 V) with holding brake, IP64, AS22DQC encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"1FK2204-5AK10-0SA0","Group Code":"R220","description":"SIMOTICS S-1FK2 CT servo motor M0=2.4 Nm; PN = 0.57 kW at nN=6000 rpm (380-480 V); PN = 0.75 kW at nN=3000 rpm (200-240 V); with holding brake; degree of protection IP64; cylindrical shaft D19x40mm; absolute encoder single-turn 22-bit (encoder AS22DQC); with OCC interface; plug size M17, rotatable;","Product Group":"9021","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FK2 servomotors for SINAMICS S210","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N_CNDU","Packaging dimensions (L x W x H)":"452.00 x 250.00 x 267.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-07-06","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/6a2791caaaed6c0883828ca2edab771c.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FK2204-5AK10-0SA0?tree=CatalogTree"},"ai":{"faq":[{"question":"What is the difference between the two power ratings on the nameplate — 0.57 kW and 0.75 kW?","answer":"The nameplate carries both because the motor is rated on two supply rails: 0.57 kW at nN = 6000 rpm on a 380-480 V feed, and 0.75 kW at nN = 3000 rpm on a 200-240 V feed. The frame and the 2.4 Nm M0 torque are the same; what changes is which SINAMICS S210 line module is feeding it and where in the constant-power speed range the application sits."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FK2204-5AK10-0SA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FK2204-5AK10-0SA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}