{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FK2204-5AK10-1MB0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FK2204-5AK10-1MB0","canonicalUrl":"https://aoctrl.com/siemens/1FK2204-5AK10-1MB0","factsUrl":"https://aoctrl.com/api/mcp/products/1FK2204-5AK10-1MB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FK2 CT servo motor, 2.4 Nm continuous torque, 0.57 kW at 6000 rpm, holding brake, AM22DQC 22-bit absolute encoder, DRIVE-CLiQ M17, IP64, 1FK2204-5AK10-1MB0.","salesMarkdown":"## What the 2.4 Nm / 6000 rpm rating actually means on the bench The 1FK2204-5AK10-1MB0 is a SIMOTICS S-1FK2 CT servo in the compact low-inertia family for SINAMICS S120 — the continuous stall torque is 2.4 Nm with PN = 0.57 kW at nN = 6000 rpm on a 380–480 V rail and PN = 0.75 kW at nN = 3000 rpm on a 200–240 V rail, which is the dual-rail rating curve the drive firmware has to be configured against before the first move command. Holding brake is integrated on this build, the absolute encoder is AM22DQC at 22-bit single-turn plus 12-bit multiturn — that resolution is what lets the position loop close tight without a homing routine after every power cycle, and it shows up on the SINAMICS topology as a DRIVE-CLiQ node on the M17 connector rather than a third-party feedback cable. The 8 kHz / 62.5 µs current-loop sample rate is the part's load-bearing figure for dynamic performance — match the inertia first, then push the velocity loop bandwidth against that clock, because at this rating the current loop is sampling faster than most mid-range servos in the same frame size. ## Mechanical interface and what IP64 actually seals Output shaft is D19 × 40 mm with feather key, power connector is size M17 and the DRIVE-CLiQ feedback connector is M17 — both are rotatable on the housing so the cable dress can be set after the motor is bolted down without binding the conductors against the flange. IP64 here is dust-tight and protected against splashing water from any direction; it is sufficient for an enclosure-mounted axis or a clean industrial cabinet, but it is not the washdown rating (IP65 or higher) that a food-and-bev or outdoor skid would need — confirm the surrounding environment before specifying it for a wet zone. ## Build-to-order class and what that does to your BOM line Product class is C — built to order with no return credit, one piece per quantity unit, packed 1 per shipper at 452 × 250 × 267 mm; group code R220 and product group 9021 are the Siemens internal identifiers a procurement system uses to route the line correctly through SAP. Lifecycle stage is current and the part is active in the Siemens catalog — for volume, build a quoted-to-order RFQ against your panel quantity and let the supplier confirm lead time per batch, because a class-C servo does not sit on a finished-goods shelf and the production slot drives the delivery date.","metaTitle":"Siemens 1FK2204-5AK10-1MB0 servo motor, 2.4 Nm, IP64","metaDescription":"Siemens SIMOTICS S-1FK2 CT servo motor, 2.4 Nm continuous, 0.57 kW at 6000 rpm, with holding brake and AM22DQC 22-bit encoder. Active, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"title":"1FK2204-5AK10-1MB0","Group Code":"R220","description":"SIMOTICS S-1FK2 CT servo motor M0=2.4 Nm; PN = 0.57 kW at nN=6000 rpm (380-480 V); PN = 0.75 kW at nN=3000 rpm (200-240 V); with holding brake; degree of protection IP64; shaft D19x40 mm with feather key; absolute encoder 22-bit + 12-bit multiturn (encoder AM22DQC); with DRIVE-CLiQ plug M17; power connector size M17; only for 8 kHz / 62.5 µs;","Product Group":"9021","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FK2 servomotors for SINAMICS S120","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N_CNDU","Packaging dimensions (L x W x H)":"452.00 x 250.00 x 267.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-07-06","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/782fda0fb30a91d96689ef89c8757fc2.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FK2204-5AK10-1MB0?tree=CatalogTree"},"ai":{"faq":[{"question":"Who supplies 1FK2204-5AK10-1MB0 and how is it quoted for volume purchases?","answer":"Independent industrial-automation distribution covers this order code against an RFQ, with current pricing and batch lead time confirmed at quote time on the requested panel quantity. Because the motor is class C (built to order, no return credit), expect the production slot — not shelf stock — to drive the delivery date."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FK2204-5AK10-1MB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FK2204-5AK10-1MB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}