{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2102-4AG00-1SC0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2102-4AG00-1SC0","canonicalUrl":"https://aoctrl.com/siemens/1FL2102-4AG00-1SC0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2102-4AG00-1SC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 1FL2102-4AG00-1SC0 SIMOTICS S-1FL2 low-inertia servomotor, 100 W, 0.32 Nm, 3000 rpm, shaft height 20 mm, hybrid connector, IP54, for SINAMICS S200.","salesMarkdown":"## Shaft height, connector and what pairs to what The Siemens 1FL2102-4AG00-1SC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 family, built to run on the SINAMICS S200 servo drive system — the drive pairing is explicit on the model description and dictates the controller-side commissioning profile. Stator stack gives 100 W rated power at a nominal speed of 3000 rpm, with stall and continuous torque both listed at 0.32 Nm, so the motor delivers its full torque envelope from standstill up to base speed without a fan or forced-air assist. Mechanical side is shaft-height 20 mm with a keyed shaft and tolerance N, no holding brake, IP54 protection without an oil seal — the right build for a clean, dry cabinet location where ingress protection is moderate rather than washdown-grade. Feedback is a 21-bit absolute single-turn encoder wired out through a hybrid connector (power + signals in one shell), so the cabinet-side cable harness is the single-cable variety typical of the S-1FL2 family — fewer cores to land, one connector to key. ## Lifecycle and the order classification that matters to procurement Packaging is one piece per shipper with outer dimensions 315 x 182 x 172 mm and a non-controlled ECCN (AL:N / ECCN:N), so export paperwork for standard destinations is straightforward and no dual-use licensing is triggered. Compliance posture: RoHS-compliant since 01-01-18 and REACH Article 33 information available through the manufacturer's candidate-list portal — the environmental declarations a buyer needs for an EU shipment are on the record, not a request away. ## Group and product codes inside the Siemens ordering system Because the unit is built per order under product class C, the right commercial move is to specify quantity against the BOM and let the supplier confirm lead time at RFQ — holding stock of a made-to-order servomotor is not how this family ships.","metaTitle":"Siemens 1FL2102-4AG00-1SC0 SIMOTICS S-1FL2 servo, 100 W","metaDescription":"Siemens 1FL2102-4AG00-1SC0 SIMOTICS S-1FL2 servomotor, 100 W, 3000 rpm, 0.32 Nm, IP54, hybrid connector, for SINAMICS S200. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2102-4AG00-1SC0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 200V 3AC Pn=100W;Nn=3000rpm M0=0.32Nm;Mn=0.32Nm Shaft height 20mm With hybrid connector AS21bit With shaft key, Tolerance N Without holding brake Protection class IP54 without oil seal Matching drive SINAMICS S200","Product Group":"X0DJ","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"315.00 x 182.00 x 172.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/dd4954da10b14b6ee4068b53d1f6f094.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2102-4AG00-1SC0?tree=CatalogTree"},"ai":{"faq":[{"question":"What is 1FL2102-4AG00-1SC0's listed group code on this Servo Motors line?","answer":"Group Code R220, with Product Group X0DJ — these are the Siemens internal ordering keys used to route the line item through EDI and into the correct price-list bucket."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2102-4AG00-1SC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2102-4AG00-1SC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}