{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2104-4AF10-0MC0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2104-4AF10-0MC0","canonicalUrl":"https://aoctrl.com/siemens/1FL2104-4AF10-0MC0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2104-4AF10-0MC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FL2 servo motor, 1 kW, 400 V 3AC, 3000 rpm, 3.2 Nm, IP54, 40 mm shaft height, with holding brake, hybrid connector AM21bit, paired with SINAMICS S200, 1FL2104-4AF10-0MC0.","salesMarkdown":"## What this motor drives on a SINAMICS S200 line The Siemens 1FL2104-4AF10-0MC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 product family, sized as the rotating element of a SINAMICS S200 motion axis — 1 kW rated power at 3000 rpm with a continuous stall and rated torque of 3.2 Nm, fed from a 400 V three-phase supply. 1 kW at 3000 rpm on a 40 mm shaft-height frame lands squarely in the format/converting and small-feed-roller zone — labelling heads, small-axis cross-cutters, pick-and-place slides and packaging indexing — where the 3.2 Nm figure sets the gearbox ratio a designer picks for the moving load. ## Reading the nameplate for fit, not just for compliance The shaft is 40 mm height with plain shaft, tolerance N, and a fitted holding brake — the brake is the energy-removal path on a vertical or back-drivable axis, so this configuration suits gravity-loaded slides that must hold position on loss of drive enable. Power and signal travel through a single hybrid connector AM21bit on the motor back — one cable carries the three-phase feed plus the 21-bit absolute encoder feedback back to the SINAMICS S200 drive, which keeps the cabinet-side wiring to a single drag-chain cord rather than a separate resolver cable. Protection class is IP54 without an oil seal — fine for general factory floors and machine interiors; not specified for washdown or food-grade splash zones, so a food-and-bev or outdoor deployment needs a separate sealing solution at the shaft entry. ## Lifecycle read and the procurement lock-in that comes with it Lifecycle status is recorded as current and active; the family is in production rather than on a last-time-buy clock, so a design-in is not gated by an immediate EOL horizon. Product class is recorded as 'manufactured / produced to order, which cannot be reused or re-utilized or returned against credit' — meaning a mis-spec'd unit is a sunk cost, so the BOM line should freeze the shaft height, encoder resolution, connector variant and brake option before the RFQ is committed. Export classification carries AL:N / ECCN:N — no special-export licence gates most destinations, but the receiving site still confirms its local import control before the RFQ is placed. ## Receiving and dock-side details Each unit ships individually packed at 382.00 x 222.00 x 240.00 mm — a single-piece carton sized for one motor rather than a multi-pack, which matters for the receiving dock planning a line-side replacement rather than a panel build.","metaTitle":"Siemens 1FL2104-4AF10-0MC0 Servo Motor, 1 kW, SINAMICS S200","metaDescription":"Siemens 1FL2104-4AF10-0MC0 SIMOTICS S-1FL2 servo motor, 1 kW at 3000 rpm, 400 V 3AC, paired with SINAMICS S200. Active production, quoted against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2104-4AF10-0MC0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 400V 3AC Pn=1kW;Nn=3000rpm M0=3.2Nm;Mn=3.2Nm Shaft height 40mm With hybrid connector AM21bit Plain shaft, Tolerance N With holding brake Protection class IP54 without oil seal Matching drive SINAMICS S200","Product Group":"X0DK","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"382.00 x 222.00 x 240.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a785a634d4d40d392d43a2a1a24d6549.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2104-4AF10-0MC0?tree=CatalogTree"},"ai":{"faq":[{"question":"What compliance paperwork does Siemens provide for 1FL2104-4AF10-0MC0?","answer":"The record shows RoHS conformity since 01-01-18 and REACH Art. 33 candidate-list disclosure is published through the standard Siemens Reach Information channel; export classification is AL:N / ECCN:N."},{"question":"Can 1FL2104-4AF10-0MC0 be returned or credited if mis-specified?","answer":"No — the product class is recorded as manufactured to order and explicitly non-returnable and non-creditable, so the shaft height, brake option, connector variant and encoder must be confirmed before the order is placed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2104-4AF10-0MC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2104-4AF10-0MC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}