{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2104-4AG11-1MC0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2104-4AG11-1MC0","canonicalUrl":"https://aoctrl.com/siemens/1FL2104-4AG11-1MC0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2104-4AG11-1MC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FL2 servo motor, 1 kW, 3.2 Nm, 3000 rpm, shaft height 40 mm, IP65 with oil seal and holding brake, for SINAMICS S200, 1FL2104-4AG11-1MC0.","salesMarkdown":"## 200 V 3AC servo sized for the SINAMICS S200 line The 1FL2104-4AG11-1MC0: The part is a SIMOTICS S-1FL2 low-inertia servo with a 1 kW rated power (Pn=1kW), 3000 rpm nominal speed (Nn=3000rpm), and matched 3.2 Nm standstill / rated torque (M0=3.2Nm; Mn=3.2Nm), so the drive-and-motor pair is dimensionally balanced rather than oversized for the bus. It carries the 40 mm shaft height of the compact 1FL2 family, addressed to packaging, small-format indexing, and lab/bench automation where the inertia-to-load ratio matters more than peak torque headroom. Output is via an AM21bit hybrid connector and a keyed shaft with N tolerance, with an integrated holding brake to hold position when the bus is de-energised — the brake is the safety-side hold, not a dynamic stop, so any vertical-axis sizing should still budget an external mechanical brake or counterweight for the E-stop case. ## IP65 with oil seal and the S200 bus contract Protection class is IP65 with oil seal, which means the body resists dust and low-pressure water jets typical of a washdown-adjacent cell, but the rating is the sealed-side figure when the hybrid connector is mated — the cable gland and counter-connector carry their own ingress class and the system-level rating is only as good as the mating half. The motor is listed for the SINAMICS S200 drive family; mixing it with an S210, V90, or earlier SINAMICS drive requires re-validating the encoder resolution (AM21bit, single-turn, multi-turn per variant) and the holding-brake wiring because the S200 connector pin map and the brake control logic differ from those older platforms. ## Lifecycle, compliance, and how the line ships Lifecycle stage is current and product status is Active, so the part is in serial production rather than available only through surplus or last-time-buy channels; no official successor has been published for this order code. RoHS substance restrictions have applied since 01-01-18 and REACH Article 33 candidate-list information is supplied on demand, which is the documentation pack a controls integrator typically asks for at the panel build stage. Export control is AL:N / ECCN:N, simplifying cross-border paperwork, and the order class is \"C\" — built to order with no return-for-credit path — so the BOM commit needs to be locked before the factory starts the build slot. Packaging is a single-piece shipper at 382.00 x 222.00 x 240.00 mm; small-format but rigid enough that the motor should be uncrated and inspected before the holding-brake release voltage is ever applied. ## Category strategy: where this 1FL2 sits in the Siemens portfolio Within the Siemens motion stack, the 1FL2 family is the compact, low-inertia option that pairs with SINAMICS S200 — distinct from the higher-inertia 1FK2 / 1FT2 lines that target heavier-load machine tools. Group Code R220 and Product Group X0DK are the internal classification keys for this servo line; the group code in particular is what a procurement system uses to roll this part up under the motion-control spend under management, separate from frequency inverters and gear motors. Because there is no on-record pin-compatible second source and no published successor order code, de-risking the supply base means qualifying a second Siemens family member or a third-party servo on the same drive platform, not chasing an identical cross-reference.","metaTitle":"Siemens 1FL2104-4AG11-1MC0 Servo Motor, 1 kW, 200 V","metaDescription":"Siemens 1FL2104-4AG11-1MC0 SIMOTICS S-1FL2 servo, 1 kW, 3.2 Nm, 3000 rpm, IP65 with holding brake, paired with SINAMICS S200.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2104-4AG11-1MC0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 200V 3AC Pn=1kW;Nn=3000rpm M0=3.2Nm;Mn=3.2Nm Shaft height 40mm With hybrid connector AM21bit With shaft key, Tolerance N With holding brake Protection class IP65 with oil seal Matching drive SINAMICS S200","Product Group":"X0DK","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"382.00 x 222.00 x 240.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/112b418e7ecb12ff6c48524541e3117a.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2104-4AG11-1MC0?tree=CatalogTree"},"ai":{"faq":[{"question":"What compliance documentation does Siemens provide with 1FL2104-4AG11-1MC0?","answer":"RoHS substance-restriction compliance applies since 01-01-18 and REACH Article 33 candidate-list information is available on request; export control is AL:N / ECCN:N, so no special license paperwork is required for typical cross-border shipments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2104-4AG11-1MC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2104-4AG11-1MC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}