{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2203-2AF10-0HC0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2203-2AF10-0HC0","canonicalUrl":"https://aoctrl.com/siemens/1FL2203-2AF10-0HC0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2203-2AF10-0HC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FL2 low-inertia servo motor, 0.2 kW, 0.64 Nm, 3000 rpm, 400 V 3AC, IP54, shaft height 30 mm, with holding brake, hybrid connector, for SINAMICS S200, 1FL2203-2AF10-0HC0.","salesMarkdown":"## What this motor drops into The 1FL2203-2AF10-0HC0 is a SIMOTICS S-1FL2 servo from the 1FL2 family built specifically to pair with the SINAMICS S200 drive, so the cable set, electronic nameplate, and one-button tuning are already aligned at the system level — no firmware handshaking required at commissioning. On the nameplate the 400 V 3AC supply feeds a 0.2 kW (Pn) frame delivering a rated torque of 0.64 Nm (Mn) at a rated speed of 3000 rpm (Nn) with a stall torque M0 = 0.64 Nm, so the continuous and stall figures are matched — the motor is not a high-overload design, and sizing should treat 0.64 Nm as both the working and the standstill ceiling. The mechanical package is a 30 mm shaft height with a plain shaft (tolerance N), a holding brake fitted, and IP54 protection without an oil seal, which lands the motor inside standard cabinets or light-duty machine enclosures but out of washdown or food-grade zones where the sealing class would need to step up to IP65 or higher. ## Encoder, connector, and drive pairing Feedback is an absolute 17-bit single-turn encoder (AS17bit) brought out on the listed hybrid connector — the single-cable hybrid simplifies the panel-side wiring because the power cores and the encoder lines share one moulded cordset rather than running two separate drag-chain cables back to the cabinet. Because the motor is designated for the SINAMICS S200, the drive-side firmware auto-identifies the motor via the electronic nameplate and pre-loads the matching current and torque limits, which removes the manual parameter entry step that an older SIMOTICS-1FK/1FT retrofit would have required. ## Lifecycle and compliance posture Lifecycle is listed as current/active, so the part is in normal production rather than a last-time-buy window — orders against an RFQ land through the standard build cycle, and the product class is C (built to order, non-returnable), which is the usual posture for a configured servo and is worth flagging internally before a blanket blanket-order PO is raised. RoHS compliance is declared since 01-01-18 and REACH Article 33 information is available on the manufacturer record, so the motor clears the substance-restriction gates for installation in equipment destined for the EU market without an exception note in the technical file. ## Logistics and quoting posture The product ships as one piece per package quantity in a 315 x 182 x 172 mm carton, so small-lot MRO spares and full multi-axis build kits both fit the same handling profile — no oversize-pallet surcharge applies for a single motor.","metaTitle":"Siemens 1FL2203-2AF10-0HC0 Servo Motor, 0.2 kW, 3000 rpm","metaDescription":"Siemens 1FL2203-2AF10-0HC0 SIMOTICS S-1FL2 servo, 0.2 kW, 0.64 Nm, 400 V 3AC, IP54, for SINAMICS S200. Active lifecycle; quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2203-2AF10-0HC0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 400V 3AC Pn=0.2kW;Nn=3000rpm M0=0.64Nm;Mn=0.64Nm Shaft height 30mm With hybrid connector AS17bit Plain shaft, Tolerance N With holding brake Protection class IP54 without oil seal Matching drive SINAMICS S200","Product Group":"X0DJ","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"315.00 x 182.00 x 172.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/f6142b92ad0909782fe5e3619e190327.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2203-2AF10-0HC0?tree=CatalogTree"},"ai":{"faq":[{"question":"What are the key electrical and mechanical ratings of 1FL2203-2AF10-0HC0?","answer":"The 1FL2203-2AF10-0HC0 runs on a 400 V 3AC supply at a rated power of 0.2 kW and rated speed of 3000 rpm, with both rated torque Mn and stall torque M0 at 0.64 Nm in a 30 mm shaft-height frame, IP54 protected, and fitted with a holding brake."},{"question":"Which Siemens drive does 1FL2203-2AF10-0HC0 pair with?","answer":"The 1FL2203-2AF10-0HC0 belongs to the 1FL2 family built for the SINAMICS S200, so the matching drive is a SINAMICS S200 unit sized for the 0.2 kW frame. Using a drive from outside the S200 line is not the intended configuration."},{"question":"What compliance documentation is available for 1FL2203-2AF10-0HC0?","answer":"The 1FL2203-2AF10-0HC0 carries RoHS compliance since 01-01-18, and REACH Article 33 candidate-list information is published on the manufacturer record. No additional regional approvals are listed in this product entry."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2203-2AF10-0HC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2203-2AF10-0HC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}