{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2203-2AG10-0HC0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2203-2AG10-0HC0","canonicalUrl":"https://aoctrl.com/siemens/1FL2203-2AG10-0HC0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2203-2AG10-0HC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FL2 low-inertia servomotor, 1FL2203-2AG10-0HC0, 0.2 kW at 3000 rpm, 0.64 Nm, shaft height 30 mm, IP54 with holding brake, hybrid connector, for SINAMICS S200.","salesMarkdown":"## Active SIMOTICS S-1FL2, sized for the 200 V SINAMICS S200 drive The Siemens 1FL2203-2AG10-0HC0 is the 30 mm shaft-height member of the SIMOTICS S-1FL2 servomotor family, built to pair directly with the SINAMICS S200 drive on a 200 V three-axis bus. With a 0.2 kW rated power at 3000 rpm and matched 0.64 Nm stall and rated torque (M0 = Mn = 0.64 Nm), it sits in the very low-inertia / small-payload end of the family — the right motor for short-cycle indexing where you want the velocity loop fast and the rotor light. The build is 200 V 3AC supply, plain shaft with tolerance N, hybrid AS17-bit encoder feedback, IP54 protection without an oil seal, and a factory-fitted holding brake — i.e. a fully drop-in axis for a vertical or gravity-loaded load that must hold position when the bus is unpowered. ## What the encoder and brake mean at the cabinet AS17-bit absolute feedback gives 131 072 counts/rev single-turn resolution — enough that on a 30 mm-frame rotor the current loop closes cleanly without the cogging torque showing up as a velocity ripple at low speeds, and the SINAMICS S200 auto-tuning has real encoder data to work with from the first commissioning. The hybrid connector carries both power and feedback over one cable, so the cabinet-side wiring is one plug to the drive rather than a separate resolver or encoder cable. The integrated holding brake is sized for the rated torque and meant to hold a vertical axis at standstill with the drive powered off; the brake override logic lives in the S200 firmware, not the motor. IP54 seals the body against incidental splash and dust but is not an outdoor or washdown rating — keep the motor inside the machine envelope, away from direct coolant spray. ## Administrative codes and packaging Siemens lists the line under Group Code R220, Product Group X0DJ, with one piece per order unit and a single-piece pack quantity; the shipping footprint is 315 x 182 x 172 mm. Product class is the custom-build/lead-time-coded 'C' category — these are produced to order rather than held on the shelf at the factory, so the procurement lead time is set by build slot, not stock. ## Procurement reality for this code Independent distributors quote this code against the BOM on a per-RFQ basis, with the build slot driving the lead time rather than a shelf-pull — so the right RFQ carries the quantity, the SINAMICS S200 firmware version the motor will plug into, and the cable length you need on the hybrid lead.","metaTitle":"Siemens 1FL2203-2AG10-0HC0 Servo Motor, 0.2kW, IP54","metaDescription":"Siemens 1FL2203-2AG10-0HC0 SIMOTICS S-1FL2 servo, 0.2 kW, 3000 rpm, 0.64 Nm, IP54, with brake, for SINAMICS S200.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2203-2AG10-0HC0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 200V 3AC Pn=0.2kW;Nn=3000rpm M0=0.64Nm;Mn=0.64Nm Shaft height 30mm With hybrid connector AS17bit Plain shaft, Tolerance N With holding brake Protection class IP54 without oil seal Matching drive SINAMICS S200","Product Group":"X0DJ","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"315.00 x 182.00 x 172.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9a5bbf4e57bf96798f523c7fa9651b7e.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2203-2AG10-0HC0?tree=CatalogTree"},"ai":{"faq":[{"question":"What ratings does the 1FL2203-2AG10-0HC0 carry?","answer":"It is a 0.2 kW servo on a 200 V 3AC bus, rated at 3000 rpm with both stall and continuous torque at 0.64 Nm, IP54 protected, fitted with a holding brake and AS17-bit feedback on a hybrid connector, shaft height 30 mm."},{"question":"What compliance documentation does Siemens provide for the 1FL2203-2AG10-0HC0?","answer":"RoHS conformity is recorded with effect from 01-01-18, REACH Article 33 information is published against the current candidate list, and the export-classification fields are AL:N and ECCN:N."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2203-2AG10-0HC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2203-2AG10-0HC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}