{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2204-2AG10-1MC0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2204-2AG10-1MC0","canonicalUrl":"https://aoctrl.com/siemens/1FL2204-2AG10-1MC0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2204-2AG10-1MC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FL2 servo motor, 1FL2204-2AG10-1MC0, 0.75 kW, 3000 rpm, 2.4 Nm, 200 V 3AC, SH40, IP54, holding brake, 21-bit hybrid encoder, matched to SINAMICS S200, RoHS compliant.","salesMarkdown":"## What the 1FL2204-2AG10-1MC0 delivers The 1FL2204-2AG10-1MC0 is a SIMOTICS S-1FL2 low-inertia servo motor rated 0.75 kW at 3000 rpm with a sustained rated torque of 2.4 Nm — the same torque figure at standstill (M0) and under load (Mn) means the motor delivers consistent holding and working torque across the speed band without significant torque droop at the lower end of the range. Shaft height is 40 mm with a keyed output shaft (tolerance N) and an integrated holding brake — the brake holds the load in position when the drive is de-energised, which is the standard arrangement for any vertical-axis or gravity-loaded axis in a positioning loop. The 21-bit hybrid encoder (AM21) provides fine position resolution — 21 bits of absolute position gives over 2 million counts per revolution, which is the resolution needed to meet the repeatability demands of high-precision pick-and-place, packaging, and assembly axes driven from a SINAMICS S200 system. ## Matched to SINAMICS S200 The motor is explicitly matched to the SINAMICS S200 drive family — the encoder type and motor constants are pre-configured in the S200 parameter set, so the integrator does not need to enter a motor ID manually during commissioning. The hybrid connector on the motor body integrates both the encoder signal and the brake conductors into a single coupler — this reduces the panel-side connector count compared with a motor that carries separate encoder and brake leads, and simplifies the cable run to the drive cabinet. ## IP54 sealed body — not a washdown motor The enclosure is rated IP54 — protected against dust ingress and water spray from any direction. This suits the motor for enclosed cabinet-adjacent mounting or motor-reducer combinations where the motor body sits inside a machine frame, but it is not rated for direct high-pressure washdown or outdoor weather exposure without additional enclosure protection. There is no oil seal on the shaft — in applications where the motor is mounted with its shaft down or in a misting environment, the absence of a shaft seal means lubricant or moisture can migrate past the bearing seal under capillary action. Specify a shaft cover or motor position that keeps the shaft above any fluid level. ## Compliance and product class RoHS compliant since 1 January 2018, with REACH Article 33 duty-to-inform obligations documented — the current candidate list substances are disclosed per regulation. No US ECCN or Australian AL restriction is listed, which simplifies export documentation for cross-border shipments. The product class is C — motors manufactured to order and not returnable or reusable against credit. This is standard for build-to-order Siemens servo hardware: units are produced against confirmed purchase orders, so the lead time from order to dispatch is a function of Siemens' production schedule rather than a warehouse pick-and-ship timeline. ## Sourcing and lifecycle posture Supplied as a single-piece unit — no tray, reel, or multi-pack option. Availability and current lead times are confirmed at RFQ against the BOM quantity. The Group Code R220 and Product Group X0DK are the internal Siemens identifiers used to consolidate orders and match the correct production variant.","metaTitle":"Siemens 1FL2204-2AG10-1MC0 Servo Motor, 0.75 kW, 3000 rpm","metaDescription":"Siemens SIMOTICS S-1FL2 servo motor, 0.75 kW at 3000 rpm, 2.4 Nm rated torque, 200 V 3AC, IP54, holding brake, 21-bit hybrid encoder, matched to SINAMICS S200.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2204-2AG10-1MC0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 200V 3AC Pn=0.75kW;Nn=3000rpm M0=2.4Nm;Mn=2.4Nm Shaft height 40mm With hybrid connector AM21bit With shaft key, Tolerance N With holding brake Protection class IP54 without oil seal Matching drive SINAMICS S200","Product Group":"X0DK","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"382.00 x 222.00 x 240.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2f5c849a46777dea784d6473ebbef73a.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2204-2AG10-1MC0?tree=CatalogTree"},"ai":{"faq":[{"question":"Is 1FL2204-2AG10-1MC0 available and what is the lead time?","answer":"The motor is built to order under product class C and is quoted to order against the BOM quantity. Lead time and current pricing are confirmed at RFQ — no warehouse stock hold is listed for this variant."},{"question":"What drive system does the 1FL2204-2AG10-1MC0 work with?","answer":"The motor is factory-matched to SINAMICS S200 — the encoder type and motor constants are pre-loaded in the S200 drive parameters, so manual motor ID entry is not required during commissioning. It uses a hybrid connector carrying both encoder and brake signals to a single cable."},{"question":"What IP rating does the 1FL2204-2AG10-1MC0 carry — is it suitable for washdown environments?","answer":"The motor is rated IP54 — dust-tight and protected against water spray. It is not suited for direct high-pressure washdown or outdoor weather exposure without additional enclosure protection. There is no oil seal on the shaft, so position the motor to keep the shaft above any fluid or mist level."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2204-2AG10-1MC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2204-2AG10-1MC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}