{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2204-2BF11-1SC0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2204-2BF11-1SC0","canonicalUrl":"https://aoctrl.com/siemens/1FL2204-2BF11-1SC0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2204-2BF11-1SC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 1FL2204-2BF11-1SC0 SIMOTICS S-1FL2 servomotor, 0.75 kW, 400 V 3AC, 3000 rpm, 2.4 Nm, shaft height 40 mm, IP65 with oil seal, hybrid connector, with holding brake, for SINAMICS S200.","salesMarkdown":"## Sizing the 1FL2 against the SINAMICS S200 drive line The 1FL2204-2BF11-1SC0 is a SIMOTICS S-1FL2 low-inertia servomotor cut for the SINAMICS S200 drive family — a 400 V 3AC bus, 0.75 kW continuous, 3000 rpm rated speed, with a stall torque M0 and rated torque Mn both at 2.4 Nm, so the motor runs flat from standstill to base speed and the drive can hold position without a gearing step. At 40 mm shaft height the frame sits in the small-footprint end of the 1FL2 family — sized for compact cells where a 0.75 kW axis (small indexing tables, light pick-and-place, auger or pump metering drives) is what the cell actually needs, not a larger frame that just adds rotor inertia. ## Feedback, brake, and the wiring side Feedback is the absolute 21-bit single-turn hybrid encoder variant — it gives the SINAMICS S200 the absolute position required for quick commissioning and safe vertical-axis holding without a homing run on every power-up. The holding brake is integral, terminated through the same hybrid connector that carries the power and feedback — one cable dress, no separate brake supply pulled into the panel, which keeps the cell-side wiring tight and the cable loop predictable. Shaft detail matters at install: this build ships with a shaft key and tolerance N, so the coupling choice has to match a keyed input — a slip-fit or clamping hub will not seat cleanly on a keyed shaft without the keyway on the mating part. ## Sealing, oil, and where this motor can live Protection class IP65 with oil seal — the shaft seal is specified for oil exposure, meaning the motor can sit next to a gearbox or hydraulic station without the gearbox oil wicking past the shaft lip and contaminating the encoder bearings in the first year of service. IP65 closes the housing against water jets from any direction, so the motor is fine on a washdown-adjacent line or under a machine housing that gets hosed down — it is not, however, a submersion rating, and it is not the IP67/IP68 you would spec for a motor sitting in a food-zone sump. ## Compliance and paperwork for the audit binder RoHS compliance is declared with effect from 2018-01-01, and the listing carries the REACH Article 33 duty-to-inform flag — meaning the current candidate-list status is shipped with the part documentation rather than left as a buyer-side check. Siemens lists this part as product class C — built to order, no return credit against the original purchase — so an MRO buyer should size spares to actual consumption and not assume a returnable surplus margin. ## Lifecycle read and where the BOM line sits Lifecycle stage is recorded as current on the active Siemens catalogue — no LTB or PCN is showing against this order code, so a fresh BOM line can be designed around 1FL2204-2BF11-1SC0 without a built-in obsolescence hedge. Group code R220 / product group X0DK place this listing on the SIMOTICS 1FL2 line within Siemens's standard servomotor taxonomy — the order code, group, and product group all line up on the same R220 / X0DK slice, which matters when an MRO ticket references the group code instead of the full MPN.","metaTitle":"Siemens 1FL2204-2BF11-1SC0 Servo Motor, 0.75 kW, 400V 3AC","metaDescription":"Siemens SIMOTICS 1FL2204-2BF11-1SC0 1FL2 servo for SINAMICS S200: 0.75 kW at 3000 rpm, 2.4 Nm, IP65. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2204-2BF11-1SC0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 400V 3AC Pn=0.75kW;Nn=3000rpm M0=2.4Nm;Mn=2.4Nm Shaft height 40mm With hybrid connector AS21bit With shaft key, Tolerance N With holding brake Protection class IP65 with oil Matching drive SINAMICS S200","Product Group":"X0DK","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"382.00 x 222.00 x 240.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/433c692ec31015396515f2ff2652a8ec.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2204-2BF11-1SC0?tree=CatalogTree"},"ai":{"faq":[{"question":"Where can I buy 1FL2204-2BF11-1SC0 and how do I get a price?","answer":"Source this Siemens 1FL2204-2BF11-1SC0 through independent industrial automation distribution — it is a built-to-order servomotor, so the request comes in as an RFQ against the BOM line and pricing is confirmed at quote time rather than off a live shelf list."},{"question":"What compliance documentation does Siemens provide for 1FL2204-2BF11-1SC0 — RoHS, REACH, UL, IEC?","answer":"RoHS compliance is declared with effect from 2018-01-01, REACH Article 33 duty-to-inform is flagged on the record, and export control is AL:N / ECCN:N. UL and IEC third-party certificates are not listed in this spec record and would need to be pulled from the ship-loose documentation if the build requires them on the audit binder."},{"question":"What is 1FL2204-2BF11-1SC0's listed group code (R220) on this Servo Motors line?","answer":"The Siemens group code recorded for 1FL2204-2BF11-1SC0 is R220, with product group X0DK — both fields sit on the SIMOTICS 1FL2 servomotor line paired with the SINAMICS S200 drive family."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2204-2BF11-1SC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2204-2BF11-1SC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}