{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2204-4AG00-1HC0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2204-4AG00-1HC0","canonicalUrl":"https://aoctrl.com/siemens/1FL2204-4AG00-1HC0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2204-4AG00-1HC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FL2 servo motor, 1 kW, 3.2 Nm, 3000 rpm, 17-bit hybrid AS connector, IP54, for SINAMICS S200, 1FL2204-4AG00-1HC0.","salesMarkdown":"## Does this motor fit a SINAMICS S200 line? The 1FL2204-4AG00-1HC0 sits in the SIMOTICS S-1FL2 family, built explicitly as the motor half of a SINAMICS S200 drive pairing — so on the controls side it slots into a S200 axis block without a third-party adapter. Power stage runs from a 200 V 3AC supply, with a rated output of 1 kW, a rated speed of 3000 rpm, and both stall torque M0 and rated torque Mn at 3.2 Nm — the flat torque curve across the speed range is what makes a 1FL2 useful on packaging and small pick-and-place axes where you need torque near standstill. Feedback is 17-bit absolute via the hybrid AS connector, shaft height 40 mm, shaft key with tolerance N, and the motor is configured without a holding brake — confirm the axis gravity load before committing, because a no-brake build needs a different safety stop architecture on a vertical axis. ## Sealing, feedback, and the integrator checklist Protection class is IP54 without an oil seal — fine for inside an enclosure or a clean cabinet-side mount, but it is not a washdown-rated servo, so for food-and-bev lines or any zone where jetting or oil splash reaches the shaft the sealing assumption has to be revisited before commissioning. The 17-bit resolution over the hybrid AS connector gives roughly 131,072 pulses per revolution — adequate for the velocity-loop bandwidth a 1 kW SINAMICS S200 axis runs at, and clean enough to keep following error low on a conveyor or small gantry without notch-filter gymnastics. Match the inertia first when sizing the load: 3.2 Nm of rated torque at 3000 rpm is the envelope — for a high-inertia coupling (large pulley, lead screw with a long nut), the torque-to-inertia ratio needs a check against the S200 current-loop headroom before the axis will tune cleanly without singing. ## Lifecycle, compliance, and ordering posture The product class is C: made-to-order, non-returnable, configured per build — order quantities align to the single-piece quantity unit and the 382.00 x 222.00 x 240.00 mm packaging carton, not to shelf-stock replenishment. Ordering flows through the standard quoted-to-order channel: configuration confirmed against the SINAMICS S200 axis list, build slot and quantity-break pricing returned at RFQ.","metaTitle":"Siemens 1FL2204-4AG00-1HC0 Servo Motor, 1 kW, 3000 rpm, IP54","metaDescription":"Siemens 1FL2204-4AG00-1HC0 SIMOTICS S-1FL2 servo, 1 kW, 3.2 Nm, 3000 rpm, 17-bit feedback, IP54, paired with SINAMICS S200. Active lifecycle, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2204-4AG00-1HC0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 200V 3AC Pn=1kW;Nn=3000rpm M0=3.2Nm;Mn=3.2Nm Shaft height 40mm With hybrid connector AS17bit With shaft key, Tolerance N Without holding brake Protection class IP54 without oil seal Matching drive SINAMICS S200","Product Group":"X0DK","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"382.00 x 222.00 x 240.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/95191a2462c3fe591eb12809949e7e81.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2204-4AG00-1HC0?tree=CatalogTree"},"ai":{"faq":[{"question":"Is 1FL2204-4AG00-1HC0 available via RFQ confirmation, and what is the lead time on an order?","answer":"The motor is built to order under product class C, so it is not a shelf-stock SKU — availability, build slot, and quantity-break pricing come back with the RFQ against your SINAMICS S200 axis list."},{"question":"How does 1FL2204-4AG00-1HC0 integrate with the drive side?","answer":"It is the matched servomotor for a SINAMICS S200 drive on a 200 V 3AC bus — 1 kW rated power, 3.2 Nm stall and rated torque, 3000 rpm rated speed, 17-bit feedback through the hybrid AS connector, and IP54 sealing without an oil seal, which sets the cabinet-versus-washdown boundary for the install."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2204-4AG00-1HC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2204-4AG00-1HC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}