{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2204-4AG10-1HC0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2204-4AG10-1HC0","canonicalUrl":"https://aoctrl.com/siemens/1FL2204-4AG10-1HC0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2204-4AG10-1HC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FL2 servo motor, 1FL2 family for SINAMICS S200, 1 kW at 3000 rpm, 3.2 Nm, holding brake, IP54, hybrid connector, 200 V 3AC supply, shaft height 40 mm.","salesMarkdown":"## Built for the SINAMICS S200 small-servo loop The Siemens 1FL2204-4AG10-1HC0 is a SIMOTICS S-1FL2 low-inertia servo from the 1FL2 family, sized for the SINAMICS S200 drive platform — the description string pins the pairing explicitly (cite:, cite:). On a 200 V 3AC bus it delivers 1 kW rated power at 3000 rpm with a 3.2 Nm standstill torque that matches rated, which is the figure a sizing engineer actually plots on the torque-speed envelope. Mechanical fit is dictated by the 40 mm shaft height, a keyed shaft with N tolerance, and a holding brake — the typical building block for vertical-axis or gravity-loaded stations where the brake holds position on a power-loss event. The IP54 rating without an oil seal positions it for clean, dry cabinet interiors or light-dust environments, not for washdown; food-grade lines and outdoor cabinets need a higher IP variant. ## Connector, feedback, and what the integrator actually wires Feedback is the 17-bit absolute single-turn encoder delivered through a hybrid connector — a single cable carries power and signals back to the SINAMICS S200, which keeps the cabinet-side wiring to one connector per axis rather than separate power and signal runs. That simplifies the drag-chain layout on a linear axis or a pick-and-place head, where cable count drives harness cost more than the motor itself. The mating half and pinout live with the SINAMICS S200 side of the system — the motor itself is qualified only against that drive in the family description. A panel builder substituting a third-party drive should expect to lose the one-cable convenience, because the encoder protocol and the brake control are tied to the S200 firmware handshake. ## Lifecycle posture and RFQ reality Lifecycle status is Active at the current production stage (cite:, cite:) — this is a current-build line, not a phased-out part. Product class C marks it as made-to-order: each unit is built against a purchase order, non-returnable and non-reusable, which means the distributor channel does not hold speculative stock of this code in the way it would a commodity contactor. Compliance paperwork is on the standard Siemens track: RoHS conformity since 01-01-18, REACH Art. 33 duty-to-inform carried through the supply chain, and ECCN N for export classification (cite:, cite:, cite:). For a category-strategy review that means the part drops cleanly into a RoHS-controlled BOM and does not trigger an export-licensing gate. Sourcing posture against an RFQ: quoted to order from authorized Siemens channels, lead time and quantity pricing confirmed at quote — no in-stock or same-day claim applies to a made-to-order servo motor.","metaTitle":"Siemens 1FL2204-4AG10-1HC0 SIMOTICS S-1FL2 Servo, 1 kW, IP54","metaDescription":"Siemens 1FL2204-4AG10-1HC0 SIMOTICS S-1FL2 servo motor, 1 kW Pn at 3000 rpm, 3.2 Nm, holding brake, IP54, paired with SINAMICS S200. Active, made-to-order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2204-4AG10-1HC0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 200V 3AC Pn=1kW;Nn=3000rpm M0=3.2Nm;Mn=3.2Nm Shaft height 40mm With hybrid connector AS17bit With shaft key, Tolerance N With holding brake Protection class IP54 without oil seal Matching drive SINAMICS S200","Product Group":"X0DK","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"382.00 x 222.00 x 240.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/2a083a0043fe4f4fc2479a61d4c50248.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2204-4AG10-1HC0?tree=CatalogTree"},"ai":{"faq":[{"question":"Who supplies 1FL2204-4AG10-1HC0 and how is it quoted for volume purchases?","answer":"The motor is product class C — made-to-order and non-returnable (cite:), so volume orders run through the Siemens authorized channel against the BOM. Quoted against an RFQ: unit pricing, lead time, and any quantity break are confirmed at quote time, with no speculative distributor stock implied."},{"question":"What compliance documentation does Siemens provide for 1FL2204-4AG10-1HC0?","answer":"RoHS conformity since 01-01-18 (cite:), REACH Art. 33 duty-to-inform carried in the supply chain (cite:), and ECCN N / AL N for export classification (cite:). The declaration pack travels with the shipment from the Siemens channel."},{"question":"What is the closest pin-compatible alternative to 1FL2204-4AG10-1HC0 in this Servo Motors family?","answer":"No official pin-compatible alternate is recorded on this listing. Any move has to stay within the 1FL2 / SINAMICS S200 platform — a different shaft height, winding, or brake option in the same family — because the hybrid connector, 17-bit encoder, and brake control are tied to that drive firmware handshake."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2204-4AG10-1HC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2204-4AG10-1HC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}