{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2204-4AG10-1SC0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2204-4AG10-1SC0","canonicalUrl":"https://aoctrl.com/siemens/1FL2204-4AG10-1SC0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2204-4AG10-1SC0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FL2 servo motor, 1 kW, 200 V 3AC, 3000 rpm, M0 3.2 Nm, shaft height 40 mm, hybrid connector, 21-bit, holding brake, IP54, SINAMICS S200 matched, order code 1FL2204-4AG10-1SC0.","salesMarkdown":"## Drop-in match for an S200 axis on a 200 V cabinet The 1FL2204-4AG10-1SC0 is a SIMOTICS S-1FL2 low-inertia servomotor sized for a 1 kW axis on a 200 V three-phase bus, with a rated speed of 3000 rpm and a 3.2 Nm continuous / standstill figure on a 40 mm shaft height — the same SH40 frame the 1FL2 line pairs with the SINAMICS S200 drive family. The cable exit is a hybrid connector carrying power plus the 21-bit absolute encoder, and the unit ships with a holding brake and a keyed N-tolerance shaft — so the swap into an existing S200 axis is mechanical and feedback, not a firmware rework. ## IP54, holding brake, and what that means on the line IP54 on the body (without an oil seal) is a panel-side rating — the motor tolerates dust and light splash typical of an enclosure wall or a guarded machine frame, but it is not a washdown food-and-bev rating and it is not the sealed connector-end barrier a wet zone demands. The integrated holding brake is sized for the 3.2 Nm shaft load — fine for vertical-axis static holding and E-stop stopping, not a continuous service brake — and the hybrid connector consolidates power and the 21-bit signal so only one cable routes back to the S200. ## Compliance and documentation on file Export classification is AL:N / ECCN:N — no strategic export licence is required for the usual industrial destinations, but the product is class C, built to order, non-returnable and non-reusable, so a cancelled BOM line is a sunk cost. ## Sourcing posture for the BOM line Because it is built to order, the right channel is quoted-to-order against an RFQ tied to the BOM quantity and the SINAMICS S200 drive pairing — current pricing and production lead are confirmed at quote time, and the order ships as a single-piece unit in the listed 382 x 222 x 240 mm pack.","metaTitle":"Siemens 1FL2204-4AG10-1SC0 Servo Motor, 1 kW, 200V 3AC, SH40","metaDescription":"Siemens SIMOTICS 1FL2204-4AG10-1SC0 servo, 1 kW, 200 V 3AC, 3000 rpm, SH40 with holding brake, hybrid connector. Active, made-to-order; quoted to RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2204-4AG10-1SC0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 200V 3AC Pn=1kW;Nn=3000rpm M0=3.2Nm;Mn=3.2Nm Shaft height 40mm With hybrid connector AS21bit With shaft key, Tolerance N With holding brake Protection class IP54 without oil seal Matching drive SINAMICS S200","Product Group":"X0DK","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"382.00 x 222.00 x 240.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/411d6bdf4cc2c252c9a2f3f3be821667.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2204-4AG10-1SC0?tree=CatalogTree"},"ai":{"faq":[{"question":"What does the 1FL2204-4AG10-1SC0 description tell you about its S200 fit?","answer":"It is a SIMOTICS S-1FL2 servomotor, 1 kW on a 200 V 3AC bus at 3000 rpm with a 3.2 Nm standstill figure on a 40 mm shaft height, terminated with a hybrid connector carrying the 21-bit encoder, with a holding brake and IP54 — the SH40 frame the 1FL2 line matches to SINAMICS S200."},{"question":"What compliance documentation is on record for 1FL2204-4AG10-1SC0?","answer":"RoHS compliance since 01-01-18 and REACH Art. 33 duty-to-inform against the current candidate list are on the supplier record; export classification is AL:N / ECCN:N."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2204-4AG10-1SC0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2204-4AG10-1SC0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}