{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL2304-2AF11-1HB0","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL2304-2AF11-1HB0","canonicalUrl":"https://aoctrl.com/siemens/1FL2304-2AF11-1HB0","factsUrl":"https://aoctrl.com/api/mcp/products/1FL2304-2AF11-1HB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FL2 servo motor, 400 V 3AC, Pn 0.4 kW, Nn 3000 rpm, M0 1.45 Nm, Mn 1.27 Nm, shaft height 45 mm, AS17-bit encoder, holding brake, IP65, for SINAMICS S200, order code 1FL2304-2AF11-1HB0.","salesMarkdown":"## The motor on the BOM line The Siemens 1FL2304-2AF11-1HB0 is a SIMOTICS S-1FL2 low-inertia servo in the 45 mm shaft-height frame, built to drop onto the SINAMICS S200 drive line that this product family pairs with directly (cites:). Supply is 400 V 3AC with a rated power of 0.4 kW at 3000 rpm and a stall torque of 1.45 Nm against a continuous 1.27 Nm — the stall-to-continuous margin is what lets it absorb accel/decel peaks without saturating the current loop during short indexing moves (cites:). The shaft carries a key with N tolerance and the housing is sealed to IP65 with an oil seal — adequate for a shop-floor axis behind a cabinet door, not for direct washdown. The feedback is an AS17-bit absolute single-turn encoder brought out via an angular connector, and a holding brake is fitted for the vertical-axis cases where a de-energised drop is unacceptable (cites:). Packaged at 382 × 222 × 240 mm per piece, this is a one-up carton rather than a multi-pack — relevant when a tooling builder is kitting a single retrofit axis (cites:). ## Where 0.4 kW lands on the axis A 1.27 Nm continuous / 1.45 Nm peak at 3000 rpm in a 45 mm frame points at auxiliary axes on a machine tool — tool changers, chip conveyors, ATC turrets, small linear-rotary indexers — not at the spindle or a main feed axis. On a five-axis centre, this rating sits comfortably below the main servos and is sized for moves where the cycle time, not the cutting load, sets the throughput (cites:). The SINAMICS S200 pairing is fixed by the product family assignment, so commissioning follows the S200 auto-configuration path rather than a generic third-party drive. PROFINET-side, the encoder resolution and the holding-brake control map into the S200 telegram automatically once the motor is selected in the project — the integrator's job is to verify the direction of rotation and the brake release timing during commissioning rather than to hand-tune the current loop (cites:,). ## Compliance and documentation Export-control classification is AL:N / ECCN:N, so the part is not flagged for an export licence on standard commercial shipments (cites:). The product is classified under Group Code R220 and Product Group X0DM, sold one piece at a time under product class C — built to order against the configured code, not a returnable stock item (cites:,). ## Lifecycle and supply posture Lifecycle stage is recorded as current and product status as Active, which is what the BOM-freeze planning letter needs to confirm before locking a retrofit design into this code (cites:,).","metaTitle":"Siemens 1FL2304-2AF11-1HB0 Servo Motor, 0.4 kW, 400V 3AC","metaDescription":"Siemens 1FL2304-2AF11-1HB0 SIMOTICS S-1FL2 servo, 0.4 kW at 400 V 3AC, 3000 rpm, IP65, for SINAMICS S200. Active production. Quoted to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors"],"specifications":{"title":"1FL2304-2AF11-1HB0","Group Code":"R220","description":"SIMOTICS S-1FL2 Supply voltage 400V 3AC Pn=0.4kW;Nn=3000rpm M0=1.45Nm;Mn=1.27Nm Shaft height 45mm With angular connector AS17bit With shaft key, Tolerance N With holding brake Protection class IP65 with oil seal Matching drive SINAMICS S200","Product Group":"X0DM","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL2 servomotors for SINAMICS S200","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"382.00 x 222.00 x 240.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/9410a938a9139d738d1a36a6b9283008.pdf","sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL2304-2AF11-1HB0?tree=CatalogTree"},"ai":{"faq":[{"question":"Where can I buy 1FL2304-2AF11-1HB0 and how do I get a price?","answer":"This Siemens 1FL2304-2AF11-1HB0 is sourced to order through independent distribution — submit the order code with the configured options against an RFQ, and current pricing plus lead time come back at quote time. No public price, stock count, or same-day ship claim is made (cites:,)."},{"question":"What compliance documentation does Siemens provide for 1FL2304-2AF11-1HB0?","answer":"Export classification is AL:N / ECCN:N, so no export licence gate applies on standard commercial shipments (cites:,)."},{"question":"What is the listed group code and product group for 1FL2304-2AF11-1HB0?","answer":"Group Code is R220 and Product Group is X0DM. These are the Siemens internal classification fields used to file the part inside the Servo Motors catalogue and to route it through the configurator (cites:,)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL2304-2AF11-1HB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL2304-2AF11-1HB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}