{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"1FL6062-1AC61-2AB1","brand":"Siemens","brandSlug":"siemens","productSlug":"1FL6062-1AC61-2AB1","canonicalUrl":"https://aoctrl.com/siemens/1FL6062-1AC61-2AB1","factsUrl":"https://aoctrl.com/api/mcp/products/1FL6062-1AC61-2AB1","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMOTICS S-1FL6 low-inertia servo motor, 3AC 400 V, 1 kW, 6 Nm stall, 2000 rpm rated, 65 mm shaft height, incremental encoder 2500 incr./rev., with holding brake and IP65 sealing, for SINAMICS V70 and V90 drives.","salesMarkdown":"## Lifecycle is the headline: NRND on a built-to-order servo Siemens lists this 1FL6062-1AC61-2AB1 as NRND on the official lifecycle record, while the normalized stage field still reads current — that mismatch is the single most important fact for anyone holding a BOM line on it. Build-to-order product class C means each unit is produced to the order, not pulled from a stocked shelf, so the procurement window has to be planned against a production slot, not a warehouse pull. Until a successor order code shows up on the official lifecycle record, every spare order is a calculated risk against whatever last-build inventory or independent channel stock is still moving — confirm availability and any applicable last-time-buy terms against an RFQ rather than assuming the line is still running on the usual cycle. ## 1 kW continuous, 6 Nm stall, IP65 — sized for the SINAMICS V70/V90 servo loop The motor delivers 1 kW rated power at 2000 rpm with a 6 Nm stall (M0) and 4.78 Nm rated (MN), so the continuous operating point sits comfortably below the stall ceiling and gives headroom for short acceleration peaks — exactly the envelope a positioning axis needs when the load inertia spikes during direction reversal. IP65 with the sealing ring fitted is the meaningful rating for commissioning: the housing tolerates washdown and dust, but it does not survive sustained submersion, so the motor belongs on a machine surface, gearbox, or linear actuator where the cable entry and flange face stay dry. The 65 mm shaft height, angle plug connector, feather key with N tolerance, and integrated holding brake line up with the mechanical side of that same axis. Compatibility is bounded: the encoder is the 2500 incr./rev. incremental type and the motor is paired with the SINAMICS V70 and SINAMICS V90 converter family — substituting a different encoder variant or a third-party drive will break the closed-loop tuning, so the substitution question has to be answered at the system level, not the motor alone. ## Compliance and admin codes the procurement trail will ask for Internal Siemens coding on the order is Group Code R220 under Product Group 5183, supplied singly (Quantity Unit 1 Piece), and carries no export-control classification (AL:N / ECCN:N) — useful to confirm against the purchase order line when the nameplate and the PO trace need to match during goods-in.","metaTitle":"Siemens 1FL6062-1AC61-2AB1 Servo Motor, 1 kW, 6 Nm, IP65","metaDescription":"Siemens 1FL6062-1AC61-2AB1 SIMOTICS 1FL6 servo, 1 kW at 2000 rpm, 6 Nm stall, IP65, for SINAMICS V70/V90. Lifecycle: NRND. Quoted to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"NRND","categoryPath":["Servo Motors"],"specifications":{"title":"1FL6062-1AC61-2AB1","Group Code":"R220","description":"SIMOTICS S-1FL6-1FL6 Operating voltage 3AC 400 V Pn=1 kW; Nn=2000 rpm M0=6 Nm; MN=4.78 Nm Shaft height 65 mm, with angle plug; incremental encoder 2500 incr./rev. with feather key, tolerance N with holding brake Degree of protection IP65 with sealing ring compatible with the converters SINAMICS V70 & V90","Product Group":"5183","Product class":"C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit.","Quantity Unit":"1 Piece","Product Family":"1FL6 servomotors for SINAMICS V90","lifecycle_stage":"current","Packaging Quantity":"1","Export Control Regulations":"AL : N / ECCN : N","Packaging dimensions (L x W x H)":"466.00 x 264.00 x 290.00 mm","Compliance with the substance restrictions according to RoHS directive":"Since: 01-01-18","REACH Art. 33 Duty to inform according to the current list of candidates":"Reach Information"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$400.05","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://sieportal.siemens.com/en-ae/products-services/detail/1FL6062-1AC61-2AB1?tree=CatalogTree"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to 1FL6062-1AC61-2AB1 in this Servo Motors family?","answer":"No official successor or pin-compatible alternate is recorded for 1FL6062-1AC61-2AB1 on the lifecycle data we have on file. Any replacement inside the SIMOTICS S-1FL6 family will need to be cross-checked against the SINAMICS V70/V90 drive, encoder resolution, holding brake option, and shaft height before it can drop into an existing axis."},{"question":"What compliance documentation does Siemens provide for 1FL6062-1AC61-2AB1?","answer":"RoHS compliance is recorded since 01-01-18 and REACH Article 33 disclosure follows the current candidate list. Any additional declarations (UL, IEC, CE DoC) are not on the spec row we have on file and have to be requested with the order paperwork."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/1FL6062-1AC61-2AB1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/1FL6062-1AC61-2AB1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T21:32:24.581Z","lastPublished":"2026-07-22T21:32:24.581Z","indexable":true}}