{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"3AXD50000840335","brand":"ABB","brandSlug":"abb","productSlug":"3AXD50000840335","canonicalUrl":"https://aoctrl.com/abb/3AXD50000840335","factsUrl":"https://aoctrl.com/api/mcp/products/3AXD50000840335","rawCanonicalId":null},"summary":{"shortDescription":"ABB ACS180-04N-12A2-1 drive module, 3 kW / 12.2 A normal use, 200–240 V 1-phase input, MODBUS, IP20, frame R2.","salesMarkdown":"The ABB ACS180-04N-12A2-1 (order code 3AXD50000840335) is a single-phase-input drive module rated 3 kW / 12.2 A for normal-duty motor loads on 200–240 V supply. It includes the control unit, so it arrives as a complete drive ready for panel mounting. Input frequency range is 47 to 63 Hz. Power factor is 0.98. Built-in MODBUS RTU on the RS-485 port handles parameter access and basic control. There is no industrial Ethernet interface, so if your network expects PROFINET or EtherNet/IP, plan for a gateway or a different drive variant. The normal-use output rating (12.2 A, 3 kW) is the constant-torque figure — sized for a standard 3 kW induction motor. Heavy-duty use drops to 9.3 A / 2.2 kW, which applies when the load requires higher torque at low speed (conveyors, crushers). Light-overload use is 11.6 A / 3 kW, for variable-torque loads like fans and pumps. For North American installations, the UL listing shows 3 Hp at light-overload (11.6 A) and 3 Hp at heavy-duty (9.8 A). The heavy-duty UL current is 9.8 A, slightly above the IEC heavy-duty figure — the UL curve allows a bit more headroom. The drive is Open Type (NEMA), so it must be mounted inside an enclosure that meets the IP20 touch-safe requirement. ## I/O and control Two analog inputs and one analog output handle speed reference and feedback signals — enough for a basic process loop. Four digital inputs and two digital outputs cover start/stop, fault reset, and status indication. No industrial Ethernet port is present; communication is MODBUS only. If your controller speaks MODBUS RTU, this drive connects directly. Otherwise budget for a protocol converter. The drive is rated for operation up to 2000 m altitude without derating. Ambient humidity range is 5–95% RH, non-condensing. Sound level is 62 dB(A) — noticeable in a quiet control room, but typical for a drive of this size. WEEE category 5 (Small Equipment) — no special disposal beyond standard electronic waste handling. No battery is included, so no periodic battery replacement.","metaTitle":"3AXD50000840335 ACS180-04N-12A2-1, 3 kW / 12.2 A","metaDescription":"Active ABB ACS180 drive module, 3 kW / 12.2 A normal use, 200–240 V 1-phase input, MODBUS, IP20, RoHS/REACH compliant. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["AC Drive (VFD) 240V"],"specifications":{"SCIP":"cb233721-9552-452e-85d9-fab6b51eca0b Finland","Altitude":"2000 m","Includes":"Control unit","Frame Size":"R2","Power Factor":"0.98","Sound dB (A)":"62 dB(A)","Analog Inputs":"2","Frequency (f)":"47 ... 63 Hz","Mounting Type":"Module","WEEE Category":"5. Small Equipment (No External Dimension More Than 50 cm)","Analog Outputs":"1","lifecycle_stage":"current","Number of Phases":"1-phase","Enclosure Type NEMA":"Open Type","Input Voltage (Uin)":"200 ... 240 V","Degree of Protection":"IP20","Apparent Power Output":"4.9 kV·A","Communication Protocol":"MODBUS","Operating Humidity (RHamβ)":"5 ... 95","Multiple Battery Information":"No battery / cell included","Number of Digital In/Outputs":"4 / 2","Number of Hardware Interfaces":"Industrial Ethernet 0","Output Power, Normal Use (Pn)":"3 kW","Output Current, Normal Use (In)":"12.2 A","Output Power, Heavy-Duty Use (PhD)":"2.2 kW","Output Current, Heavy-Duty Use (IhD)":"9.3 A","Output Power, Light-Overload Use (PlD)":"3 kW","Certificates and Declarations/RoHS Date":"20250106","Certificates and Declarations/REACH Date":"20250905","Output Current, Light-Overload Use (IlD)":"11.6 A","Certificates and Declarations/RoHS Information":"Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019","Technical UL/Output Power, Heavy-Duty Use (UL)":"3 Hp","Certificates and Declarations/REACH Information":"True - contains substances > 0.1 mass percentage","Technical UL/Output Current, Heavy-Duty Use (UL)":"9.8 A","Technical UL/Output Power, Light-Overload Use (UL)":"3 Hp","Technical UL/Output Current, Light-Overload Use (UL)":"11.6 A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.abb.com/global/en/products/3axd50000840335","alternativesUrl":"https://aoctrl.com/api/mcp/products/3AXD50000840335/alternatives.json"},"ai":{"faq":[{"question":"What are the key ratings for this drive?","answer":"Normal-use output is 3 kW / 12.2 A; heavy-duty is 2.2 kW / 9.3 A; light-overload is 3 kW / 11.6 A. Input is 200–240 V single-phase, 47–63 Hz. Apparent power is 4.9 kVA."},{"question":"What communication protocol does it support?","answer":"MODBUS RTU via RS-485. No industrial Ethernet port is built in."},{"question":"What compliance documentation is available?","answer":"RoHS compliant per EU 2011/65/EU + amendment 2015/863, REACH declared (contains substances >0.1%), SCIP number on file, and UL listed for 3 Hp output."},{"question":"What is the IP rating and enclosure type?","answer":"IP20 touch-safe, NEMA Open Type — must be installed inside an enclosure."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/abb/3AXD50000840335","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/abb/3AXD50000840335 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}