{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"3RA2110-1GD15-1AP0","brand":"Siemens","brandSlug":"siemens","productSlug":"3RA2110-1GD15-1AP0","canonicalUrl":"https://aoctrl.com/siemens/3RA2110-1GD15-1AP0","factsUrl":"https://aoctrl.com/api/mcp/products/3RA2110-1GD15-1AP0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIRIUS direct-on-line starter, size S00, CLASS 10, 2.2 kW at 400 V, for 60 mm busbar systems, screw-type terminals, supplied with 3RT2015-1AP01 contactor.","salesMarkdown":"## Direct starter for 60 mm busbar systems The Siemens SIRIUS 3RA2110-1GD15-1AP0 is a direct-on-line starter in size S00, designed to snap onto 60 mm busbar systems — a common panel layout in European switchgear. It ships as a pre-assembled unit with the 3RT2015-1AP01 contactor and 3RA1921-1DA00 link module, so the BOM line is one order code instead of three separate components. If your motor has a long acceleration time (high-inertia flywheel or loaded start), you would need a CLASS 20 or CLASS 30 overload relay instead. Rated at 2.2 kW at 400 V, this starter covers the common 3 hp (2.2 kW) motor frame on 400 V three-phase networks. The 690 V rated insulation voltage gives headroom for IT systems or 480 V installations where phase-to-phase voltage stays under that ceiling. Mounts vertically only, snapping onto 60 mm busbar systems. Clearance requirements: 50 mm upwards, 20 mm forwards, 20 mm at the side, 10 mm downwards, and zero backwards. That zero backwards clearance means it can sit flush against a back panel or busbar support without derating. Dimensions are 155 mm deep × 45 mm wide × 203 mm tall. The depth is the critical dimension when fitting into a shallow enclosure — 155 mm leaves room behind a 200 mm deep cabinet door with typical wiring space. If your panel standard mandates cage-clamp for vibration resistance, check the 3RA2110-1GD15-1AP0's sibling with spring terminals.","metaTitle":"Siemens 3RA2110-1GD15-1AP0 SIRIUS Direct Starter, CLASS 10","metaDescription":"Siemens SIRIUS 3RA2110-1GD15-1AP0 direct-on-line starter, size S00, CLASS 10 trip, 400 V rated at 2.2 kW. Snaps onto 60 mm busbar. Current production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Starters"],"specifications":{"Depth":"155 mm","Width":"45 mm","Height":"203 mm","Upwards":"50 mm","Forwards":"20 mm","at 50 Hz":"0.25","at 60 Hz":"0.25","Backwards":"0 mm","Downwards":"10 mm","Trip Class":"CLASS 10","At The Side":"20 mm","Rated Value":"690 V","During Storage":"-50 ... +80 °C","lifecycle_stage":"current","During Operation":"-20 ... +60 °C","During Transport":"-50 ... +80 °C","Fastening Method":"for snapping onto 60 mm busbar systems","Mounting Position":"vertical","PROFIsafe protocol":"No","Product Brand Name":"SIRIUS","Type Of Assignment":"1","Product Designation":"Direct (on-line) starter","Size Of Load Feeder":"S00","PROFINET IO protocol":"No","at 230 V rated value":"0.75 hp","at 400 V rated value":"2 200 kW","at 480 V rated value":"4.8 A","at 50 Hz rated value":"230 ... 230 V","at 60 Hz rated value":"230 ... 230 V","at 600 V rated value":"6.1 A","Design Of The Product":"for 60 mm busbars","For Main Current Circuit":"screw-type terminals","Temperature Compensation":"-20 ... +60 °C","at 110/120 V rated value":"0.25 hp","at 200/208 V rated value":"1.5 hp","at 220/230 V rated value":"2 hp","at 460/480 V rated value":"3 hp","at 575/600 V rated value":"5 hp","Of The Supplied Contactor":"3RT2015-1AP01","Of The Supplied Link Module":"3RA1921-1DA00","Size Of The Circuit-Breaker":"S00","at AC-3 rated value maximum":"690 V","at AC-3 at 400 V rated value":"6.3 A","at AC-3e rated value maximum":"690 V","Substance Prohibitance (Date)":"10/01/2009","at AC-3e at 400 V rated value":"6.3 A","Design Of The Overload Release":"thermal (bimetallic)","Of The Supplied Busbar Adapter":"8US1251-5DS10","Design Of The Switching Contact":"electromechanical","Operating Frequency Rated Value":"50 ... 60 Hz","Design Of The Short-Circuit Trip":"magnetic","Of The Supplied Circuit-Breakers":"3RV2011-1GA10","degree of protection NEMA rating":"other","For Auxiliary And Control Circuit":"screw-type terminals","Product Extension Auxiliary Switch":"Yes","Relative Humidity During Operation":"10 ... 95 %","Without Load Current Share Typical":"4.2 W","Surge Voltage Resistance Rated Value":"6 kV","at AC in hot operating state per pole":"2.6 W","Number Of Poles For Main Current Circuit":"3","Product Function Short Circuit Protection":"Yes","apparent holding power of magnet coil at AC":"4.2 VA","protocol is supported AS-Interface protocol":"No","with high demand rate according to SN 31920":"73 %","reference code according to IEC 81346-2:2019":"Q","shock resistance according to IEC 60068-2-27":"6g / 11 ms","Type Of Voltage Of The Control Supply Voltage":"AC","at 400 V according to IEC 60947-4-1 rated value":"150 000 A","Inductive Power Factor With The Holding Power Of The Coil":"0.25","Mechanical Service Life (Operating Cycles) Of Contactor Typical":"30 000 000","Response Value Current Of Instantaneous Short-Circuit Trip Unit":"82 A","insulation voltage with degree of pollution 3 at AC rated value":"690 V","Adjustable Current Response Value Current Of The Current-Dependent Overload Release":"4.5 ... 6.3 A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=184502&mlfb=3RA2110-1GD15-1AP0","alternativesUrl":"https://aoctrl.com/api/mcp/products/3RA2110-1GD15-1AP0/alternatives.json"},"ai":{"faq":[{"question":"What is the current rating of 3RA2110-1GD15-1AP0?","answer":"The motor rating at 400 V is 2.2 kW (3 hp). At 480 V the rated current is 4.8 A; at 600 V it is 6.1 A. The trip class is CLASS 10."},{"question":"Where can I buy 3RA2110-1GD15-1AP0 and get a price?","answer":"This part is available to order. Submit an RFQ for current pricing and availability — confirmed at quote time through our supply channel."},{"question":"Is 3RA2110-1GD15-1AP0 compatible with 60 mm busbar?","answer":"Yes, it is designed for snapping onto 60 mm busbar systems. The fastening method and product design are both specified for 60 mm busbars."},{"question":"What is the trip class for 3RA2110-1GD15-1AP0?","answer":"CLASS 10 — disconnects within 10 seconds at 7.2× thermal setting, suitable for standard induction motor starts."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/3RA2110-1GD15-1AP0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/3RA2110-1GD15-1AP0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}