{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"3RK1301-0AB10-1AB4","brand":"Siemens","brandSlug":"siemens","productSlug":"3RK1301-0AB10-1AB4","canonicalUrl":"https://aoctrl.com/siemens/3RK1301-0AB10-1AB4","factsUrl":"https://aoctrl.com/api/mcp/products/3RK1301-0AB10-1AB4","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC motor starter, reversing design, 24 V DC, PROFINET + PROFIBUS DP, trip class 5/10/15/20, 50 kA at 400 V, 150 x 130 x 290 mm.","salesMarkdown":"The Siemens 3RK1301-0AB10-1AB4 is a SIMATIC-branded reversing motor starter — a single device that handles forward/reverse control of a three-phase motor without external contactors. It integrates the reversing contactor pair, overload protection, and fieldbus interface in one 130 mm wide housing that plugs onto a terminal module (fastening method: pluggable on terminal module). This is a panel-mount unit sized for a standard enclosure; the 150 mm depth and 290 mm height leave room for wiring ducts and gland plates on a typical 600 mm deep cabinet. Rated supply is 24 V DC (20.4 to 28.8 V permissible range), which powers the internal electronics and coil. The starter accepts two digital inputs for start/stop and direction commands, and it reports status via 2 bytes of input data and 2 bytes of output data on the fieldbus. The overload relay is adjustable to trip class 5, 10, 15, or 20. That means the thermal model trips in 5, 10, 15, or 20 seconds at 7.2× the set current. For a pump or fan with a slow acceleration curve, class 20 gives the motor time to start without nuisance tripping; for a fast-cycling conveyor, class 5 keeps the winding protected. The reversing function is built in (reverse starting: Yes), so the same unit handles direction change without an extra contactor. Direct start is not supported — this is strictly a reversing starter, not a non-reversing one. ## Fieldbus and environmental limits Both PROFINET and PROFIBUS DP protocols are on board — the starter can be addressed as a standard IO device on either network. Vibration resistance is 2g, shock resistance 5g at 11 ms, which covers most industrial machinery (conveyors, machine tools, packaging lines). Pollution degree 3 at 400 V and 2 at 500 V per IEC 60664 / IEC 61131 means it's rated for industrial environments with conductive dust or occasional condensation.","metaTitle":"Siemens 3RK1301-0AB10-1AB4 SIMATIC Motor Starter, Reversing,","metaDescription":"Siemens 3RK1301-0AB10-1AB4 SIMATIC reversing motor starter. 24 V DC supply, PROFINET/PROFIBUS DP, trip class 5/10/15/20, 50 kA at 400 V. Active production. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Remote I/O & Fieldbus Modules"],"specifications":{"Depth":"150 mm","Width":"130 mm","at DC":"24 ... 24 V","Height":"290 mm","Trip Class":"CLASS 5, 10, 15, 20","Direct Start":"No","Of The Inputs":"2 byte","During Storage":"-40 ... +70 °C","Of The Outputs":"2 byte","lifecycle_stage":"current","During Operation":"0 ... 60 °C","During Transport":"-40 ... +70 °C","Fastening Method":"pluggable on terminal module","Reverse Starting":"Yes","Shock Resistance":"5g / 11 ms","Mounting Position":"vertical, horizontal","PROFINET protocol":"Yes","at DC rated value":"20.4 ... 28.8 V","Product Brand Name":"SIMATIC","Type Of Assignment":"2","Degree Of Pollution":"3 at 400 V, 2 at 500 V according to IEC60664 (IEC61131)","Maximum Permissible":"28.8 V","Minimum Permissible":"20.4 V","Product Designation":"Motor starters","PROFIBUS DP protocol":"Yes","Vibration Resistance":"2g","at 400 V rated value":"50 kA","Design Of The Product":"reversing starter","For Main Energy Infeed":"screw-type terminals","supply voltage 1 at DC":"24 ... 24 V","Number Of Digital Inputs":"2","For Digital Input Signals":"0","For Digital Output Signals":"0","brake control with 24 V DC":"No","1 For Digital Input Signals":"using control module","2 For Digital Input Signals":"using control module","Operating Frequency Maximum":"750 1/h","brake control with 180 V DC":"No","brake control with 230 V AC":"No","brake control with 500 V DC":"No","For Main Energy Transmission":"via energy bus","For Supply Voltage Line-Side":"via backplane bus","Type Of The Motor Protection":"solid-state","at AC-3 at 400 V rated value":"3 A","For Load-Side Outgoing Feeder":"Screw-type terminals","Operating Voltage Rated Value":"200 ... 400 V","Substance Prohibitance (Date)":"10/26/2016","supports PROFIenergy shutdown":"Yes","Digital Inputs Parameterizable":"Yes","For Communication Transmission":"via backplane bus","Insulation Voltage Rated Value":"500 V","Of The Communication Interface":"via backplane bus","Design Of The Switching Contact":"electromechanical","Digital Outputs Parameterizable":"No","For Supply Voltage Transmission":"via backplane bus","Operating Frequency 1 Rated Value":"50 Hz","Operating Frequency 2 Rated Value":"60 Hz","Design Of Short-Circuit Protection":"circuit-breakers","Product Function Bus Communication":"Yes","Product Function On-Site Operation":"Yes","Relative Humidity During Operation":"5 ... 95 %","Product Component Motor Brake Output":"Yes","Surge Voltage Resistance Rated Value":"6 kV","supports PROFIenergy measured values":"Yes","EMC immunity according to IEC 60947-1":"corresponds to degree of severity 3, ambience A (industrial sector)","Type Of Voltage Of The Supply Voltage":"DC","due to burst according to IEC 61000-4-4":"2 kV on voltage supply, inputs and outputs","reference code according to IEC 81346-2":"Q","Number Of Poles For Main Current Circuit":"3","control supply voltage at DC rated value":"20.4 ... 28.8 V","Product Function Short Circuit Protection":"Yes","design of the interface PROFINET protocol":"Yes","with low demand rate according to SN 31920":"100 FIT","protocol is supported AS-Interface protocol":"No","with high demand rate according to SN 31920":"75 %","operating power at AC-3 at 400 V rated value":"1.1 kW","At The Manufacturer-Specific Device Interface":"plug","Type Of Voltage Of The Control Supply Voltage":"DC","EMC emitted interference according to IEC 60947-1":"CISPR11, ambience A (industrial sector)","Product Extension Braking Module For Brake Control":"Yes","Relative Negative Tolerance Of The Operating Frequency":"10 %","Relative Positive Tolerance Of The Operating Frequency":"10 %","Type Of Electrical Connection For Main Current Circuit":"screw-type terminals","Installation Altitude At Height Above Sea Level Maximum":"2 000 m","operating range relative to the operating voltage at AC at 50 Hz":"200 ... 440 V","operating voltage at AC at 60 Hz according to CSA and UL rated value":"600 V","Mechanical Service Life (Operating Cycles) Of The Main Contacts Typical":"100 000","Maximum Permissible Voltage For Safe Isolation Between Main And Auxiliary Circuit":"400 V","Adjustable Current Response Value Current Of The Current-Dependent Overload Release":"0.3 ... 3 A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$708.66","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=16535&mlfb=3RK1301-0AB10-1AB4","alternativesUrl":"https://aoctrl.com/api/mcp/products/3RK1301-0AB10-1AB4/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for 3RK1301-0AB10-1AB4?","answer":"Submit an RFQ through this listing. The part is sourced to order through independent distribution; pricing and stock status are confirmed at quote time."},{"question":"What are the key ratings of 3RK1301-0AB10-1AB4?","answer":"24 V DC supply (20.4–28.8 V range), trip class adjustable 5/10/15/20, 50 kA short-circuit breaking capacity at 400 V, PROFINET and PROFIBUS DP onboard, two digital inputs, 2 bytes input and 2 bytes output data."},{"question":"What is the physical size of 3RK1301-0AB10-1AB4?","answer":"Width 130 mm, depth 150 mm, height 290 mm. It mounts vertically or horizontally and plugs onto a terminal module."},{"question":"Does 3RK1301-0AB10-1AB4 support PROFINET?","answer":"Yes, PROFINET protocol is supported, along with PROFIBUS DP. Both are built into the device."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/3RK1301-0AB10-1AB4","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/3RK1301-0AB10-1AB4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}