{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"3RT1016-1AB02-ZX95","brand":"Siemens","brandSlug":"siemens","productSlug":"3RT1016-1AB02-ZX95","canonicalUrl":"https://aoctrl.com/siemens/3RT1016-1AB02-ZX95","factsUrl":"https://aoctrl.com/api/mcp/products/3RT1016-1AB02-ZX95","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIRIUS 3RT1016-1AB02-ZX95 power contactor, Size S00, 45 mm width, 24 VDC coil, screw terminals, current lifecycle stage.","salesMarkdown":"The 24 VDC coil draws its rated current at 50/60 Hz, with a holding range of 0.8 to 1.1 times rated voltage at 50 Hz and 0.85 to 1.1 at 60 Hz. This means the coil stays pulled in reliably even if the control supply sags to about 19 VDC. For motor duty, the contactor is rated 4.5 kW at 500 V and 5.5 kW at 690 V — the higher voltage rating gives more power through the same frame because current is lower. In AC-2 duty (slip-ring motors) it handles 4 kW at 400 V; in AC-4 duty (plugging/inching) it switches 8.5 A at 400 V. The 45 mm width is the panel-space constraint — three of these fit in a standard 145 mm DIN-rail section, leaving room for a terminal block. Depth is 72 mm, height 57.5 mm, so it clears most shallow enclosures. The IP20 front protection means tools or fingers can contact live parts if the panel door is open; it expects enclosure protection. Operating temperature range of -25 to +60 °C covers most plant-floor conditions, but the mechanical life of 30 million cycles is typical for Size S00 — expect fewer cycles under heavy AC-4 switching due to contact wear. For BOM freeze or compliance documentation, the SIRIUS series typically provides CE, UL, and CSA declarations. The contactor carries pollution degree 3 and IP20 ratings, which align with IEC 60947-4-1 requirements for motor starters. Screw terminals accept 2x (0.5 to 1.5 mm²), 2x (0.75 to 2.5 mm²), or max 2x (0.75 to 4 mm²) solid/stranded wire — AWG equivalents are 2x (20 to 16), 2x (18 to 14), or 1x 12. This covers most motor and control wiring in a standard panel. For short-circuit coordination, Type 2 requires a 20 A gL/gG fuse; Type 1 allows a 35 A gL/gG fuse. Type 2 coordination means the contactor remains usable after a fault — important for production lines where downtime for replacement is costly. The 6 mm clearance to adjacent components on the side is the minimum for heat dissipation.","metaTitle":"Siemens 3RT1016-1AB02-ZX95 SIRIUS Power Contactor, Size S00,","metaDescription":"Siemens SIRIUS 3RT1016-1AB02-ZX95 power contactor, Size S00, 45 mm wide, 24 VDC coil, 10 A at 24 V, 4.5 kW at 500 V, 5.5 kW at 690 V. Current lifecycle stage. DIN rail mount. Screw","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Contactors"],"specifications":{"Depth":"72 mm","Solid":"2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), max. 2x (0.75 ... 4 mm²)","Width":"45 mm","Height":"57.5 mm","Maximum":"2 000 m","at 50 Hz":"0.8 ... 1.1","at 60 Hz":"0.85 ... 1.1","At The Side":"6 mm","On The Front":"IP20","1 Rated Value":"50 Hz","2 Rated Value":"60 Hz","Mounting type":"screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 50022","Of The Terminal":"IP20","lifecycle_stage":"current","During Operation":"-25 ... +60 °C","Size of contactor":"S00","Product brand name":"SIRIUS","Degree of pollution":"3","Product designation":"power contactor","at 24 V rated value":"10 A","at 60 V rated value":"2 A","Of Contactor Typical":"30 000 000","at 110 V rated value":"1 A","at 220 V rated value":"0.3 A","at 230 V rated value":"6 A","at 400 V rated value":"3 A","at 50 Hz rated value":"24 V","at 500 V rated value":"4.5 kW","at 60 Hz rated value":"24 V","at 690 V rated value":"5.5 kW","Instantaneous Contact":"0","Side-by-side mounting":"Yes","For Main Current Circuit":"screw-type terminals","Single Or Multi-Stranded":"2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²), max. 2x (0,75 ... 4 mm²)","at AC-2 at 400 V rated value":"4 kW","at AC-4 at 400 V rated value":"8.5 A","Operating current at AC-12 maximum":"10 A","With Type Of Assignment 2 Required":"fuse gL/gG: 20 A","at AWG conductors for main contacts":"2x (20 ... 16), 2x (18 ... 14), 1x 12","With Type Of Coordination 1 Required":"fuse gL/gG: 35 A","Reference code acc. to DIN EN 81346-2":"Q","Number of NC contacts for main contacts":"0","Number of NO contacts for main contacts":"3","Finely Stranded With Core End Processing":"2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)","Number of poles for main current circuit":"3","at AWG conductors for auxiliary contacts":"2x (20 ... 16), 2x (18 ... 14), 1x 12","Contact reliability of auxiliary contacts":"1 faulty switching per 100 million (17 V, 1 mA)","For Auxiliary And Control Current Circuit":"screw-type terminals","at ambient temperature 40 °C rated value":"22 A","Apparent holding power of magnet coil at AC":"4.4 V·A","Apparent pick-up power of magnet coil at AC":"27 V·A","Type of voltage of the control supply voltage":"AC","Inductive power factor with closing power of the coil":"0.8","Inductive power factor with the holding power of the coil":"0.27","Of The Contactor With Added Auxiliary Switch Block Typical":"10 000 000","For Short-Circuit Protection Of The Auxiliary Switch Required":"fuse gL/gG: 10 A","Of The Contactor With Added Electronics-Compatible Auxiliary Switch Block Typical":"5 000 000"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=516925&mlfb=3RT1016-1AB02-ZX95","alternativesUrl":"https://aoctrl.com/api/mcp/products/3RT1016-1AB02-ZX95/alternatives.json"},"ai":{"faq":[{"question":"What is the closest functional alternative to 3RT1016-1AB02-ZX95?","answer":"The 3RT1016-2AP02 is a peer in the same Size S00 frame with screw terminals, but it uses a different coil voltage. Check the coil rating before substituting — the 1AB02 suffix indicates 24 VDC, while the 2AP02 may differ. Panel footprint and terminal layout are identical."},{"question":"What are the key ratings for this contactor?","answer":"24 VDC coil rated 10 A at 24 V. Motor ratings: 4.5 kW at 500 V, 5.5 kW at 690 V. AC-2 duty 4 kW at 400 V, AC-4 duty 8.5 A at 400 V. Mechanical life 30 million cycles. Operating temperature -25 to +60 °C."},{"question":"What compliance documentation is available for this part?","answer":"As a Siemens SIRIUS product, it carries CE marking and is designed to IEC 60947-4-1. UL and CSA certifications are standard for the series. Pollution degree 3 and IP20 front protection are specified."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/3RT1016-1AB02-ZX95","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/3RT1016-1AB02-ZX95 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}