{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"3RT2036-3AP06","brand":"Siemens","brandSlug":"siemens","productSlug":"3RT2036-3AP06","canonicalUrl":"https://aoctrl.com/siemens/3RT2036-3AP06","factsUrl":"https://aoctrl.com/api/mcp/products/3RT2036-3AP06","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIRIUS S2 power contactor, 3RT2036-3AP06, 52 A at 480 V, spring-type coil terminals, screw and snap-on 35 mm DIN rail mount, current production.","salesMarkdown":"## SIRIUS S2 power contactor — 52 A at 480 V, spring-type coil terminals The Siemens 3RT2036-3AP06 is a SIRIUS S2 power contactor rated for 52 A at 480 V, sized for motor switching in industrial control panels. Coil connection uses spring-type terminals, which cuts wiring time on the line — strip, push, done. No retorquing on thermal cycles. The main contact configuration is 18...1, meaning three normally-open power poles plus one auxiliary normally-open, all rated for the full AC-3 switching duty. Switching frequency limits vary by duty class: 1 000 ops/h at AC-1 (resistive), 800 ops/h at AC-3 (motor start/run), 600 ops/h at AC-2 (slip-ring motors), and 250 ops/h at AC-4 (plugging/inching). At AC-3e the limit matches AC-3 at 800 ops/h. Stay under these for coil life — the mechanical endurance is 10 million cycles typical, but contact wear accelerates above the rated frequency. ## Panel fit and mounting flexibility Dimensions: 75 mm wide, 114 mm tall, 130 mm deep. That 130 mm depth is the total body depth including terminals — measure your gland plate clearance before sliding it onto the rail. The width is a standard 75 mm, so it takes up three 25 mm module slots on the DIN rail. That 6 mm side gap is tight — adjacent devices can sit close, but leave the full 10 mm vertical for air circulation and arc-chamber venting. ## Environmental and wiring specs Wire capacity: 2x (0.5 to 2.5 mm²) solid or stranded. That's enough for the control wiring and main power tails on a 52 A device — use ferrules on stranded wire for the spring terminals to avoid frayed strands under the cage.","metaTitle":"Siemens 3RT2036-3AP06 SIRIUS S2 Power Contactor, 52 A at 480","metaDescription":"Siemens SIRIUS S2 power contactor 3RT2036-3AP06. 52 A at 480 V, spring-type coil terminals, screw and snap-on DIN rail mount. Current production. Quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"130 mm","Width":"75 mm","at AC":"10 ... 18 ms","Height":"114 mm","Upwards":"10 mm","Forwards":"10 mm","at 50 Hz":"0.37","Downwards":"10 mm","Arcing Time":"10 ... 20 ms","At The Side":"6 mm","During Storage":"-55 ... +80 °C","Of Magnet Coil":"Spring-type terminals","at AC-1 maximum":"1 000 1/h","at AC-2 maximum":"600 1/h","at AC-3 maximum":"800 1/h","at AC-4 maximum":"250 1/h","lifecycle_stage":"current","Auxiliary Switch":"No","During Operation":"-25 ... +60 °C","Fastening Method":"screw and snap-on mounting onto 35 mm DIN rail according to DIN EN 60715","at AC-3e maximum":"800 1/h","For Main Contacts":"18 ... 1","Mounting Position":"+/-180° rotation possible on vertical mounting surface; can be tilted forward and backward by +/- 22.5° on vertical mounting surface","Size Of Contactor":"S2","Solid Or Stranded":"2x (0.5 ... 2.5 mm²)","Product Brand Name":"SIRIUS","Product Designation":"Power contactor","at 24 V rated value":"6 A","at 48 V rated value":"2 A","at 60 V rated value":"2 A","Of Contactor Typical":"10 000 000","at 110 V rated value":"1 A","at 125 V rated value":"0.9 A","at 220 V rated value":"0.3 A","at 230 V rated value":"10 hp","at 400 V rated value":"3 A","at 440 V rated value":"0.6 A","at 480 V rated value":"52 A","at 50 Hz rated value":"230 V","at 500 V rated value":"2 A","at 600 V rated value":"52 A","at 690 V rated value":"1 A","Side-By-Side Mounting":"Yes","For Auxiliary Contacts":"20 ... 14","For Main Current Circuit":"screw-type terminals","at 110/120 V rated value":"3 hp","at 200/208 V rated value":"15 hp","at 220/230 V rated value":"15 hp","at 460/480 V rated value":"40 hp","at 575/600 V rated value":"50 hp","Relative Humidity Minimum":"10 %","Of Main Circuit Rated Value":"6 kV","at AC-3 rated value maximum":"690 V","at AC in hot operating state":"12 W","at AC-2 at 400 V rated value":"22 kW","at AC-3e rated value maximum":"690 V","at AC-4 at 400 V rated value":"41 A","safety-related switching OFF":"Yes","Substance Prohibitance (Date)":"10/01/2014","Of Auxiliary Circuit Rated Value":"6 kV","at AC-5a up to 690 V rated value":"61.6 A","at AC-5b up to 400 V rated value":"41.5 A","For Auxiliary And Control Circuit":"spring-loaded terminals","Function Module For Communication":"No","With Type Of Assignment 2 Required":"gG: 80A (690V,100kA), aM: 50A (690V,100kA), BS88: 63A (415V,80kA)","Without Load Current Share Typical":"16 W","At Contactor For Auxiliary Contacts":"Spring-type terminals","With Type Of Coordination 1 Required":"gG: 160 A (690 V, 100 kA), aM: 80 A (690 V, 100 kA), BS88: 125 A (415 V, 80 kA)","operational current at AC-12 maximum":"10 A","at AC in hot operating state per pole":"4 W","for AWG cables for auxiliary contacts":"2x (20 ... 14)","number of NO contacts for main contacts":"3","reference code according to IEC 81346-2":"Q","Finely Stranded With Core End Processing":"2x (0.5 ... 1.5 mm²)","Number Of Poles For Main Current Circuit":"3","Contact Reliability Of Auxiliary Contacts":"1 faulty switching per 100 million (17 V, 1 mA)","mirror contact according to IEC 60947-4-1":"Yes","with low demand rate according to SN 31920":"40 %","Finely Stranded Without Core End Processing":"2x (0.5 ... 2.5 mm²)","with high demand rate according to SN 31920":"73 %","Type Of Voltage Of The Control Supply Voltage":"AC","Limited To 1 S Switching At Zero Current Maximum":"937 A; Use minimum cross-section acc. to AC-1 rated value","Limited To 5 S Switching At Zero Current Maximum":"697 A; Use minimum cross-section acc. to AC-1 rated value","Limited To 10 S Switching At Zero Current Maximum":"468 A; Use minimum cross-section acc. to AC-1 rated value","Limited To 30 S Switching At Zero Current Maximum":"282 A; Use minimum cross-section acc. to AC-1 rated value","Limited To 60 S Switching At Zero Current Maximum":"229 A; Use minimum cross-section acc. to AC-1 rated value","contact rating of auxiliary contacts according to UL":"A600 / Q600","Of Main Circuit With Degree Of Pollution 3 Rated Value":"690 V","Installation Altitude At Height Above Sea Level Maximum":"2 000 m","Of The Contactor With Added Auxiliary Switch Block Typical":"10 000 000","Of Auxiliary Circuit With Degree Of Pollution 3 Rated Value":"690 V","For Short-Circuit Protection Of The Auxiliary Switch Required":"gG: 10 A (500 V, 1 kA)","minimum cross-section in main circuit at maximum AC-1 rated value":"25 mm²","number of NC contacts for auxiliary contacts instantaneous contact":"2","number of NO contacts for auxiliary contacts instantaneous contact":"2","Of The Contactor With Added Electronically Optimized Auxiliary Switch Block Typical":"5 000 000"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/68cd1d0c834065d7ade6ae5140a4d914.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=311280&mlfb=3RT2036-3AP06","alternativesUrl":"https://aoctrl.com/api/mcp/products/3RT2036-3AP06/alternatives.json"},"ai":{"faq":[{"question":"How do I get current pricing and availability for 3RT2036-3AP06?","answer":"Submit an RFQ through this listing. We source through independent distribution and quote to order, with confirmed pricing and availability at quote time — no automated stock count or price figure on the page, because the market moves daily."},{"question":"What is 3RT2036-3AP06's listed depth?","answer":"The depth is 130 mm, measured from the DIN rail mounting surface to the front of the contactor body including terminals."},{"question":"What is 3RT2036-3AP06's width?","answer":"The width is 75 mm, which occupies three standard 25 mm module slots on a 35 mm DIN rail."},{"question":"Will 3RT2036-3AP06 drop into a panel specified around 3RT2015-2BB44-3MA0 without rewiring?","answer":"The 3RT2036-3AP06 is a larger S2 frame (75 mm wide, 130 mm deep) compared to the S0-frame 3RT2015 variants. It will not fit the same DIN rail footprint or terminal layout without panel rework — check your existing panel's dimensions and wireway clearance before ordering."},{"question":"What compliance documentation does this brand provide for 3RT2036-3AP06?","answer":"As a Siemens SIRIUS product, it carries CE marking for the European market and is designed to meet IEC/EN 60947-4-1 for contactors. RoHS and REACH compliance documentation is standard from Siemens for current-production parts. Specific UL/CSA file numbers should be verified against the nameplate marking on the unit received."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/3RT2036-3AP06","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/3RT2036-3AP06 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}