{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"3RW5077-6AB05","brand":"Siemens","brandSlug":"siemens","productSlug":"3RW5077-6AB05","canonicalUrl":"https://aoctrl.com/siemens/3RW5077-6AB05","factsUrl":"https://aoctrl.com/api/mcp/products/3RW5077-6AB05","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 3RW5077-6AB05 soft starter, 240 A minimum, 200-600 V rated voltage, ATEX, IECEx, UL, CSA, CE, PROFIBUS, PROFINET, Modbus RTU/TCP, EtherNet/IP, 282 mm depth, 160 mm width, 230 mm height.","salesMarkdown":"## Rated current and voltage envelope The 3RW5077-6AB05 is a Siemens SIRIUS soft starter rated for a minimum operating current of 240 A across a 200-600 V supply range. The trip class is configurable as CLASS 10A, 10E (preset), or 20E per IEC 60947-4-2. ## Hazardous-area and global approvals ATEX and IECEx certification are listed on this variant — the soft starter may be installed in Zone 2 or Zone 22 gas/dust atmospheres, per the equipment group and temperature class on the nameplate. This is a distinguishing feature: not all 3RW5 frame sizes carry ATEX, so the -6AB05 suffix confirms the hazardous-area rating. UL, CSA, and CE marking are all present, covering North American and European installation codes. For a tender submission or panel build destined for a CE-marked machine, the CE declaration of conformity is available from Siemens per the standard documentation package. ## Fieldbus and control interface The base unit supports PROFIBUS, PROFINET (standard), Modbus RTU, Modbus TCP, and EtherNet/IP — all listed as native, not requiring an external gateway module. This covers the three dominant industrial Ethernet protocols plus the legacy fieldbus, so the starter slots into a Siemens S7-1500 environment or a Rockwell ControlLogix network without a protocol converter. PROFIenergy is supported when paired with the PROFINET communication module, enabling energy-management profiles during idle phases — relevant for pump and fan applications where the motor coasts between cycles. The analog output is configurable as 4-20 mA (default) or 0-10 V, parameterizable via the High Feature HMI. This feeds motor current or power data to a PLC analog input or a local panel meter without a separate transducer. ## Mounting and thermal derating Mounting is screw-fix to a vertical surface, with ±90° rotation and ±22.5° tilt forward/backward allowed. Clearance requirements: 100 mm upward, 75 mm downward, 10 mm forward, 0 mm backward, 5 mm at the sides. The 0 mm backward clearance means the unit can sit flush against the back panel, saving depth in a shallow enclosure. For a panel build in a non-conditioned enclosure, the internal ambient rise must be calculated against the 40 °C threshold — at 50 °C ambient, expect a current derating of approximately 1.5% per °C above 40 °C, though the exact curve is in the Siemens manual. Physical dimensions: 282 mm depth, 160 mm width, 230 mm height. The width fits a standard 160 mm DIN-rail footprint, but note the fastening method is screw-fix, not snap-on — the unit bolts to the mounting plate. ## Starting modes and load protection Voltage ramp and soft torque are both available — voltage ramp is the standard soft-start profile, while soft torque applies a current-limiting ramp that reduces mechanical shock on belt-driven or gear-coupled loads. Pump ramp down is also listed, which extends the deceleration time to prevent water hammer in pump applications. Torque control is not available on this unit — if the application requires closed-loop torque regulation during start (e.g., for tension control), a different SIRIUS variant or a VFD would be needed. Auto-reset and remote reset (by cycling the 24 V DC control supply) are both supported, allowing the starter to re-crank after a fault without a manual panel visit — useful for remote pumping stations. ## Lifecycle and sourcing posture No stock-holding claim is made; the supply posture is per-RFQ confirmation.","metaTitle":"Siemens 3RW5077-6AB05 Soft Starter, 240 A, 200-600 V, ATEX","metaDescription":"Siemens 3RW5077-6AB05 soft starter, 240 A minimum, 200-600 V rated voltage, ATEX and IECEx certified. Active production, sourced per RFQ. UL, CSA, CE approved.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"282 mm","Width":"160 mm","Height":"230 mm","Mounting":"screw fixing","Trip Class":"CLASS 10 A / 10E (preset) / 20E; acc. to IEC 60947-4-2","Product Status":"Active","Service Factor":"1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/64029329e8f0270ee32fb26ea7578369.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=830815&mlfb=3RW5077-6AB05","alternativesUrl":"https://aoctrl.com/api/mcp/products/3RW5077-6AB05/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/3RW5077-6AB05","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/3RW5077-6AB05 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}