{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"3RW5146-1XC14","brand":"Siemens","brandSlug":"siemens","productSlug":"3RW5146-1XC14","canonicalUrl":"https://aoctrl.com/siemens/3RW5146-1XC14","factsUrl":"https://aoctrl.com/api/mcp/products/3RW5146-1XC14","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIRIUS 3RW5146-1XC14 soft starter, 160 A minimum, 200-480 V, 50/60 Hz, PROFIBUS, Modbus RTU, PROFINET, screw fixing, 417 x 210 x 203 mm.","salesMarkdown":"## Mounting and panel fit — 417 × 210 × 203 mm The 3RW5146-1XC14 measures 417 mm high, 210 mm wide, and 203 mm deep, with screw fixing to the mounting surface. Clearance requirements are specified: 100 mm upwards, 75 mm downwards, 10 mm forwards, 5 mm at the side, and 0 mm backwards. The mounting position allows ±90° rotation and ±22.5° tilt forward/backward from vertical. At 417 mm height, this unit occupies substantial vertical panel space. The 0 mm rear clearance means it can sit flush against a backplate, simplifying enclosure layout when depth is constrained. ## Motor control ratings and trip class Rated for a minimum operating current of 160 A across a supply voltage range of 200 to 480 V at 50 or 60 Hz. The trip class is selectable: CLASS 10A (default), 10E, or 20E per IEC 60947-4-2. The minimum load setting is 15% of the smallest settable Ie, which gives the soft starter the flexibility to handle lightly loaded motors without nuisance tripping. A service factor of 1 is specified. ## Fieldbus and HMI connectivity Built-in PROFIBUS, Modbus RTU, and PROFINET interfaces allow direct integration into common industrial networks without external gateways. The control circuit uses screw-type terminals. An analog output is configurable as 4–20 mA (default) or 0–10 V with the High Feature HMI, providing motor current or other process feedback to a PLC or drive panel meter. Two HMI variants are supported: a standard HMI and a High Feature HMI. The High Feature unit enables parameterization of the analog output signal type and access to the error logbook. ## Starting and stopping profile Voltage ramp start is standard, with starting voltage adjustable from 30% to 100% of line voltage. The stopping voltage is fixed at 50% and non-adjustable. A Soft Torque profile is available for reducing mechanical shock on the load during acceleration. The unit supports inside-delta circuit wiring, which reduces the current rating required for the soft starter by approximately 42% compared to standard in-line connection. This is a key consideration when retrofitting into an existing motor starter cabinet with limited ampacity. ## Environmental limits and mechanical endurance Pollution degree 3 per IEC 60947-4-2 means the unit is suited for industrial environments with conductive dust or occasional condensation. Shock resistance is 15 g / 11 ms (with potential contact lifting from 12 g / 11 ms), and vibration resistance is 15 mm at 6 Hz, 2 g to 500 Hz. These ratings support installation on machinery subject to moderate vibration, such as conveyor drives or compressor skids. ## Reset and firmware capabilities Auto-reset and remote reset are both supported — the remote reset is performed by cycling the control supply voltage off and on. Firmware updates are possible in the field, which is a consideration for validation engineers who need to document the firmware version at qualification.","metaTitle":"Siemens 3RW5146-1XC14 SIRIUS Soft Starter, 160 A, 200-480 V","metaDescription":"Siemens 3RW5146-1XC14 SIRIUS soft starter, 160 A minimum current, 200-480 V, PROFIBUS/Modbus RTU/PROFINET. Active production. Quoted to order. RFQ for volume.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":[],"specifications":{"Depth":"203 mm","Width":"210 mm","Height":"417 mm","Mounting":"screw fixing","Trip Class":"CLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2","Product Status":"Active","Service Factor":"1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/faabd5740a6ed92f49b0ce4a42a6c841.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=830837&mlfb=3RW5146-1XC14","alternativesUrl":"https://aoctrl.com/api/mcp/products/3RW5146-1XC14/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/3RW5146-1XC14","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/3RW5146-1XC14 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}