{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"3RW5227-1TC15","brand":"Siemens","brandSlug":"siemens","productSlug":"3RW5227-1TC15","canonicalUrl":"https://aoctrl.com/siemens/3RW5227-1TC15","factsUrl":"https://aoctrl.com/api/mcp/products/3RW5227-1TC15","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIRIUS 3RW5227-1TC15 soft starter, hybrid switching device, 40.5 A minimum operating current, 200-600 V rated voltage, Class 10A/10E/20E trip, PROFIBUS, Modbus RTU/TCP, EtherNet/IP, PROFINET, screw fixing, 203 x 185 x 306 mm.","salesMarkdown":"## What this SIRIUS soft starter delivers on a motor line The 3RW5227-1TC15 is a SIRIUS hybrid switching device — a soft starter that ramps motors up and down without the mechanical wear of a contactor across the full current range. Its minimum operating current is 40.5 A, so it is sized for motor loads that draw at least that at full load; the rated voltage span is 200... 600 V, covering standard low-voltage networks from 208 V to 600 V without a tap change. Trip class is selectable: CLASS 10A (default), 10E, or 20E per IEC 60947-4-2. That means the starter can be set to trip within 10 seconds (Class 10) or 20 seconds (Class 20) under locked-rotor conditions — a choice that matters when coordinating with upstream protection on a conveyor or pump start. The default 10A is the tightest; 20E gives more headroom for high-inertia loads. Soft torque and pump ramp down are built in — the starter can reduce starting torque for gentle load acceleration and ramp the motor down on stop to avoid water hammer in pumping applications. No external add-on module needed for that. ## Fieldbus connectivity and control supply This unit ships with onboard PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET standard — five fieldbus protocols, so it drops into most plant networks without a separate gateway. Remote reset is done by cycling the control supply voltage off then on — no separate reset signal wire needed. Auto-reset is also available if the application allows automatic restart after a fault clears. Firmware updates are supported over the fieldbus connection, which saves pulling the unit for a flash update on a production line. ## Mounting, cooling, and panel fit Fastening method is screw fixing — not DIN-rail snap-on — so the panel backplate needs drilled and tapped holes or threaded inserts. If the panel ambient hits 50 °C, the unit must be downrated per the curve. Physical envelope is 203 mm deep, 185 mm wide, 306 mm high — a substantial footprint. Clearance requirements: 100 mm upwards, 75 mm downwards, 10 mm forwards, 5 mm at the sides, 0 mm backwards. That means the unit can sit flush against the back panel but needs generous vertical air path above and below for convection cooling. Shock resistance is 15 g / 11 ms, with potential contact lifting at 12 g / 11 ms — so in high-vibration environments (near a press or crusher), the mounting structure should be stiff enough to keep acceleration below 12 g at the mounting points. ## Compliance and approvals — what the nameplate carries CE marking, UL approval, and CSA approval are all confirmed on this variant. That covers the European Low Voltage Directive, US and Canadian safety listings — so the unit can be specified into panels destined for North America or Europe without a separate agency review. The product category is hybrid switching devices, meaning it combines semiconductor switching for the ramp with a bypass contactor that closes at full speed — reducing heat dissipation during continuous run.","metaTitle":"Siemens 3RW5227-1TC15 SIRIUS Soft Starter, 40.5 A, 200-600 V","metaDescription":"Siemens 3RW5227-1TC15 SIRIUS soft starter, 40.5 A min, 200-600 V, Class 10A/10E/20E trip, PROFIBUS/Modbus/EtherNet/IP. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"203 mm","Width":"185 mm","Height":"306 mm","Mounting":"screw fixing","Trip Class":"CLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2","Product Status":"Active","Service Factor":"1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a7ff86457e6c08fbe9bb0e656766e67f.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=830575&mlfb=3RW5227-1TC15","alternativesUrl":"https://aoctrl.com/api/mcp/products/3RW5227-1TC15/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/3RW5227-1TC15","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/3RW5227-1TC15 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}