{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"3RW5534-2HF14","brand":"Siemens","brandSlug":"siemens","productSlug":"3RW5534-2HF14","canonicalUrl":"https://aoctrl.com/siemens/3RW5534-2HF14","factsUrl":"https://aoctrl.com/api/mcp/products/3RW5534-2HF14","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 3RW5534-2HF14 soft starter, 200-480 V rated voltage, ATEX certified, trip class CLASS 10A/10E/20E/30E per IEC 60947-4-2, 306H x 185W x 203D mm, UL/CSA approved.","salesMarkdown":"## ATEX-rated motor starting for hazardous-area duty The 3RW5534-2HF14 carries ATEX and IECEx certification, meaning it can be deployed in Zone 1/21 or Zone 2/22 motor control centers without an external isolation barrier — the soft starter itself is the certified interface between the supply and the Ex-rated motor. Rated voltage is 200-480 V, covering the common low-voltage motor systems across 50 Hz and 60 Hz regions; the control supply accepts 110-250 V at either frequency. Trip class is selectable between CLASS 10A (default), CLASS 10E, CLASS 20E, and CLASS 30E per IEC 60947-4-2 — this lets the commissioning engineer match the thermal overload curve to the motor's winding time constant, avoiding nuisance trips on high-inertia starts while still protecting against locked-rotor conditions. ## Fieldbus integration and analog feedback Onboard communication includes Modbus RTU, Modbus TCP, and EtherNet/IP — the soft starter connects directly to a PLC backplane without a separate gateway module, saving a DIN-rail slot and reducing IP address consumption. An analog output configurable as 4-20 mA or 0-10 V provides real-time motor current to a SCADA system or local panel meter, enabling trending of start-up current profiles for predictive maintenance. PROFIBUS and PROFIenergy are supported when paired with the PROFINET communication module, allowing energy monitoring and coordinated shutdown sequences in automated lines. ## Advanced starting and stopping profiles Voltage ramp provides the basic soft-start profile; torque control adds a current-limited acceleration phase for loads that need a constant torque ramp rather than a voltage ramp — relevant for screw compressors and extruders where the load torque increases with speed. Breakaway pulse delivers a short high-torque burst to break static friction before the ramp begins — useful on belt conveyors and positive-displacement pumps that have a high breakaway torque requirement. Pump ramp down decelerates the motor gradually on stop, reducing water hammer in pumping systems; DC braking provides controlled deceleration for high-friction loads without mechanical brake wear. ## Panel integration and clearance requirements Physical dimensions are 306 mm height, 185 mm width, 203 mm depth — this is a panel-mount unit that requires 100 mm clearance above, 75 mm below, 10 mm in front, 5 mm at the sides, and 0 mm behind for airflow and wiring access. Termination is via screw-type terminals (: No indicates spring-clamp or ring-lug connection — confirm the exact termination style from the installation manual before panel layout). Accuracy class 5 per IEC 61557-12 applies to the integrated current measurement; service factor 1.15 means the soft starter can sustain 115% of rated current continuously without derating — relevant for applications where the motor runs near full load. The safe state is open load circuit, meaning the fail-safe output (: 1 channel) opens the motor circuit on a fault condition, ensuring the motor stops even if the control system loses power.","metaTitle":"Siemens 3RW5534-2HF14 Soft Starter, 200-480V, ATEX","metaDescription":"Siemens 3RW5534-2HF14 soft starter, rated 200-480 V, ATEX certified, trip class CLASS 10A/10E/20E/30E per IEC 60947-4-2. UL/CSA approved.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"203 mm","Width":"185 mm","Height":"306 mm","Mounting":"screw fixing","Trip Class":"CLASS 10 A / 10E (default) / 20E / 30E; acc. to IEC 60947-4-2","Product Status":"Active","Service Factor":"1.15","Digital Output Version":"2 normally-open contacts (NO) / 1 normally-closed contact (NC) / 1 changeover contact (CO)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/88222525efd7720058d9fcbd6f37972e.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=831200&mlfb=3RW5534-2HF14","alternativesUrl":"https://aoctrl.com/api/mcp/products/3RW5534-2HF14/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/3RW5534-2HF14","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/3RW5534-2HF14 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}