{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"5SV1313-7KK10","brand":"Siemens","brandSlug":"siemens","productSlug":"5SV1313-7KK10","canonicalUrl":"https://aoctrl.com/siemens/5SV1313-7KK10","factsUrl":"https://aoctrl.com/api/mcp/products/5SV1313-7KK10","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SENTRON RCBO, 1P+N, Type A, 10 A, 30 mA, C-curve, 4.5 kA, 50 Hz.","salesMarkdown":"The Siemens SENTRON 5SV1313-7KK10 is a combined residual current circuit breaker with overcurrent protection (RCBO) — one module wide, 1P+N construction, rated 10 A at 30 °C with a 30 mA residual trip threshold. The C-curve characteristic means it holds 5–10× In for short overloads, then trips magnetically for fast fault clearing, which suits motor and lighting circuits with moderate inrush. The Type A RCD detects sinusoidal AC and pulsating DC residual currents, covering most modern electronics and single-phase drives. The 10 A rating holds only at 30 °C ambient. At 40 °C it derates to 9.4 A, at 50 °C to 8.8 A, and at 60 °C to 8.1 A. If your distribution board runs warm — say 55 °C inside the enclosure — the continuous load should not exceed 8.4 A per pole. This is the figure that governs real-world circuit sizing, not the 30 °C label. Depth is 77 mm, installation depth 70 mm. Mounting position is unrestricted, so it fits vertical or horizontal busbar arrangements. IP20 with the distribution board installed and conductors connected; the enclosure provides the environmental seal.","metaTitle":"Siemens SENTRON 5SV1313-7KK10 RCBO, Type A, 10 A, 30 mA, C-c","metaDescription":"Siemens SENTRON 5SV1313-7KK10 RCBO, 1P+N, 10 A rated, 30 mA residual current, Type A, C-curve, 4.5 kA breaking capacity. Current production. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Residual Current Breakers (RCCB/RCBO)"],"specifications":{"Depth":"77 mm","Width":"18 mm","title":"5SV1313-7KK10","Height":"90 mm","Maximum":"75 °C","Minimum":"-40 °C","description":"RCBO compact 1P+N 4.5 kA type A 30 mA C10","Halogen-Free":"Yes","Silicon-Free":"Yes","Design Of Pole":"1P+N","Number Of Poles":"2","lifecycle_stage":"current","Mounting Position":"any","at AC rated value":"10 A","Installation Depth":"70 mm","Product Brand Name":"SENTRON","Degree Of Pollution":"2","Operating Frequency":"50 Hz","Product Designation":"RCBO","protection class IP":"IP20, if the distribution board is installed, with connected conductors","Overvoltage Category":"III","Design Of The Product":"Instantaneous","Residual Current Type":"A","Weight With Packaging":"133 g","at 30 °C rated value":"10 A","at 40 °C rated value":"9.4 A","at 45 °C rated value":"9.1 A","at 50 °C rated value":"8.8 A","at 55 °C rated value":"8.4 A","at 60 °C rated value":"8.1 A","at 65 °C rated value":"7.7 A","at 70 °C rated value":"7.4 A","Energy Limitation Class":"3","For Testing Equipment Minimum":"195 V","Number Of Modular Width Units":"1","Position Of Power Supply Cord":"Either top or bottom","Tripping Characteristic Class":"C","Number Of Poles With Protection":"1","according to EN 60898 rated value":"4.5 kA","Tripping Fault Current Rated Value":"30 mA","insulation voltage (Ui) rated value":"253 V","Supply Voltage Frequency Rated Value":"50 Hz","Surge Voltage Resistance Rated Value":"4 000 V","according to IEC 60947-2 rated value":"5 kA","Surge Current Resistance At (8/20) μS":"1 kA","Influence Of The Surrounding Temperature":"Max. 95% humidity","Type Of Voltage Of The Operating Voltage":"AC","Mechanical Service Life (Operating Cycles) Typical":"10 000","for rated value of the current at AC in hot operating state per pole":"0.95 W"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/50e590cfc611663d86f4d47f5958db69.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1027015&mlfb=5SV1313-7KK10"},"ai":{"faq":[{"question":"Where can I buy 5SV1313-7KK10?","answer":"The part is sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at the time of quote."},{"question":"What is the residual current rating and type?","answer":"The 5SV1313-7KK10 trips at 30 mA residual current and is Type A, meaning it responds to sinusoidal AC and pulsating DC fault currents — the standard choice for circuits with rectifiers, switched-mode power supplies, or single-phase drives."},{"question":"What compliance documentation is available for 5SV1313-7KK10?","answer":"The part carries EN 60898 certification for the 4.5 kA breaking capacity, is halogen-free and silicon-free, and is designed to Overvoltage Category III with Pollution Degree 2. Standard Siemens SENTRON documentation includes the declaration of conformity covering the applicable IEC/EN standards."},{"question":"Will 5SV1313-7KK10 drop into a panel specified around 5SY4110-7CV?","answer":"Both are 1-module-wide Siemens RCBOs on the same DIN-rail footprint, so mechanical fit is identical. The 5SV1313-7KK10 is a Type A RCD with a C-curve MCB, while the 5SY4110-7CV is a different variant — verify the residual current type and tripping characteristic match your circuit design before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/5SV1313-7KK10","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/5SV1313-7KK10 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}