{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"5TT5800-6","brand":"Siemens","brandSlug":"siemens","productSlug":"5TT5800-6","canonicalUrl":"https://aoctrl.com/siemens/5TT5800-6","factsUrl":"https://aoctrl.com/api/mcp/products/5TT5800-6","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SENTRON insta contactor, 5TT5800-6, 2 NO contacts, 230 V AC coil, 20 A at 400 V, 18 mm wide, IP20.","salesMarkdown":"The Siemens 5TT5800-6 is a SENTRON insta contactor with 2 normally open (NO) contacts, designed for switching resistive and incandescent lamp loads in DIN-rail panels. Its 230 V AC coil matches standard lighting and HVAC control circuits across 50/60 Hz installations. Rated for 20 A at 400 V AC, the 5TT5800-6 carries a switching capacity of 1 000 W for incandescent lamp loads — suitable for switching banks of tungsten lighting in commercial or industrial zones. The 2 NO contact arrangement means it closes two independent circuits on coil energisation, with zero NC contacts. At 18 mm wide (one modular width unit) and 71 mm deep, it occupies a single DIN-rail position. The manufacturer specifies that spacers must be provided between units to ensure adequate heat dissipation — a practical constraint when packing multiple contactors in a row. The 18 mm width matches the standard modular DIN-rail footprint used across SENTRON and other 1-MW component ranges. The 90 mm height and 71 mm depth clear most standard distribution board enclosures. Supplementary devices can be installed on the contactor, allowing add-on auxiliary contact blocks or interface modules without replacing the base unit.","metaTitle":"Siemens 5TT5800-6 SENTRON Insta Contactor, 230 V AC 2 NO","metaDescription":"Siemens SENTRON 5TT5800-6 insta contactor, 2 NO contacts, 230 V AC coil, 20 A at 400 V. IP20, 18 mm wide, 1 MW. Active, available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Contactors"],"specifications":{"Depth":"71 mm","Width":"18 mm","title":"5TT5800-6","Height":"90 mm","Maximum":"230 V","Minimum":"230 V","Rated Value":"230 V","description":"INSTA contactor 0/1-automatic with 2 NO contacts Contact for 230 V AC, 400V 20A Control 230 V AC","lifecycle_stage":"current","Installation Depth":"0 mm","Product Brand Name":"SENTRON","Product Designation":"Insta contactor","Rated Value Maximum":"230 V","protection class IP":"IP20","Design Of The Product":"2 NO contacts","number of NC contacts":"0","number of NO contacts":"2","Installation Or Assembly Note":"provision must be made for spacers to ensure heat dissipation","Number Of Modular Width Units":"1","Type Of Voltage Of The Operating Voltage":"AC","Product Extension Installable Supplementary Devices":"Yes","Type Of Voltage Of The Operating Voltage For Actuation":"AC","Switching Capacity Active Power With Incandescent Lamp Load":"1 000 W","power loss [W] for rated value of the current at AC in hot operating state per pole":"1.7 W"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$22.86","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/3f475439398ed6bc1c47456696e907d4.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=63794&mlfb=5TT5800-6"},"ai":{"faq":[{"question":"What is the 5TT5800-6 used for?","answer":"It is used as an insta contactor for switching resistive and incandescent lamp loads in DIN-rail control panels, typically in lighting circuits, HVAC control, or general on/off switching up to 20 A at 400 V AC."},{"question":"What are the key dimensions of the 5TT5800-6?","answer":"The 5TT5800-6 measures 18 mm wide, 90 mm high, and 71 mm deep — one modular width unit for standard DIN-rail mounting."},{"question":"Where can I buy the 5TT5800-6?","answer":"The 5TT5800-6 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time."},{"question":"Will 5TT5800-6 drop into a panel specified around 5SL6006-7 without rewiring?","answer":"Not directly — the 5SL6006-7 is a miniature circuit breaker with different mounting depth (76 mm vs 71 mm) and a 1P+N pole configuration, while the 5TT5800-6 is a contactor with 2 NO contacts. The DIN-rail width is the same (18 mm), but the function and wiring differ significantly."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/5TT5800-6","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/5TT5800-6 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}