{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1132-4BD32-2AA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1132-4BD32-2AA0","canonicalUrl":"https://aoctrl.com/siemens/6AG1132-4BD32-2AA0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1132-4BD32-2AA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens S7-300 SM 322 digital output module, 6AG1132-4BD32-2AA0, 4 transistor outputs, 2 A per channel, 24 VDC, 15 mm wide.","salesMarkdown":"## 4 transistor outputs at 2 A each The Siemens 6AG1132-4BD32-2AA0 is a 4-channel digital output module for the S7-300 system, delivering 2 A per channel from a 24 VDC supply drawn from the backplane bus. Each output is a transistor type with short-circuit protection, so a faulted load won't cascade across the module or take out the backplane fuse. The 15 mm wide module fits a single slot in the S7-300 rail, and the 1.6 W typical power loss means the thermal load on the enclosure is modest even with all four channels running at rated current. ## Switching speeds and load types The module switches resistive loads up to 1 000 Hz, but inductive loads at 0.5 H are limited to 2 Hz, and lamp loads to 10 Hz. The turn-on delay is 50 µs typical (45 µs), turn-off 120 µs typical (90 µs) — fast enough for most valve and contactor banks, but not for high-speed indexing or PWM. The response threshold for overload detection sits between 2.8 and 7.2 A, so a sustained 4 A per-module limit trips the protection before the output transistor exceeds its SOA. ## Temperature range and isolation Isolation between channels and the backplane bus is tested at 500 V DC; there is no channel-to-channel isolation, so all four outputs share a common reference. ## Cable length and diagnostics Unshielded cable runs up to 600 m, shielded up to 1 000 m, so the module handles remote valve islands or motor starters at the far end of a production line without signal degradation. No onboard diagnostics — no channel-level fault LED or bus-based error reporting. The short-circuit protection is the only built-in safeguard; for predictive maintenance, plan on external current monitoring or a downstream motor-protective breaker.","metaTitle":"Siemens 6AG1132-4BD32-2AA0 S7-300 Digital Output Module","metaDescription":"Siemens 6AG1132-4BD32-2AA0 S7-300 digital output module, 4 transistor outputs at 2 A each, 24 VDC, short-circuit protected. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"Max.":"60 °C; = Tmax","Min.":"-25 °C; = Tmin","Depth":"52 mm","Width":"15 mm","Height":"81 mm","Remark":"1 byte","Lower Limit":"12 Ω","Upper Limit":"3 400 Ω","For Uprating":"No","With Packing":"4 bit","Shielded, Max.":"1 000 m","Weight, approx.":"40 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"50 µs; Typ. 45 µs","\"1\" To \"0\", Max.":"120 µs; Typ. 90 µs","Power loss, typ.":"1.6 W","Rated value (DC)":"24 V; From power module","Unshielded, Max.":"600 m","On Lamp Load, Max.":"10 Hz","Between The Channels":"No","Diagnostics function":"No","For Signal \"1\", Min.":"L+ (-1.0 V)","Isolation tested with":"500 V DC","Type of digital output":"Transistor","Current per module, max.":"4 A","Response threshold, typ.":"2.8 to 7.2 A","Short-circuit protection":"Yes","Number of digital outputs":"4","With Inductive Load, Max.":"2 Hz; At 0.5 H","With Resistive Load, Max.":"1 000 Hz","For Signal \"1\" Rated Value":"2 A","Reverse voltage protection":"Yes; when using the same load voltage as on the power module","Controlling a digital input":"Yes","Reverse polarity protection":"Yes","Address space per module, max.":"1 byte","For Redundant Control Of A Load":"Yes; per module","from backplane bus 3.3 V DC, max.":"10 mA","For Signal \"0\" Residual Current, Max.":"0.5 mA","Between The Channels And Backplane Bus":"Yes","For Signal \"1\" Permissible Range, Max.":"2.4 A","For Signal \"1\" Permissible Range, Min.":"7 mA","Status indicator digital output (green)":"Yes","from load voltage L+ (without load), max.":"10 mA; Per channel","Installation altitude above sea level, max.":"5 000 m","Limitation of inductive shutdown voltage to":"Typ. L+ (-55 to -60 V)","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$528.32","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e51396e92b3a763c69906944371f4bb2.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=24024&mlfb=6AG1132-4BD32-2AA0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6AG1132-4BD32-2AA0/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy 6AG1132-4BD32-2AA0?","answer":"Submit an RFQ with your target quantity and delivery window."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1132-4BD32-2AA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1132-4BD32-2AA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}