{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1132-4HB12-2AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1132-4HB12-2AB0","canonicalUrl":"https://aoctrl.com/siemens/6AG1132-4HB12-2AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1132-4HB12-2AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS ET 200S, 2-channel relay output module, 6AG1132-4HB12-2AB0, 5 A rated, 24 V DC supply from backplane, conformal coated, -25 to +60 °C, 15 mm width.","salesMarkdown":"## Conformal-coated relay output for harsh environments The Siemens 6AG1132-4HB12-2AB0 is a SIPLUS ET 200S digital output module with two relay outputs, each rated for 5 A continuous at up to 230 V AC or 24-48 V DC, powered from the backplane bus at 24 V DC. The two relay outputs switch up to 5 A resistive load at 2 Hz maximum, or 0.5 Hz with inductive loads — the relay contact rating, not the electronics, governs the switching life. Each output can control a digital input directly, or drive small contactors and solenoids within the 5 A ceiling. The module draws a maximum of 30 mA from the load voltage supply (unloaded) and 10 mA from the backplane bus, so it adds minimal heat to a densely packed ET 200S slice — typical power loss is 0.6 W. Width is 15 mm, depth 52 mm, height 81 mm, matching the standard ET 200S form factor. It snaps onto the DIN rail and connects via the backplane bus connector — no additional wiring for the bus. ## Harsh environment compliance The conformal coating and extended temperature range are backed by environmental qualification covering gas exposure (GX class, group A/B), salt spray (LC3), and oil (LB3). The module operates at altitudes up to 2 000 m, with shielded cable runs up to 1 000 m and unshielded up to 600 m. The relay outputs include reverse polarity protection and substitute value capability on CPU stop.","metaTitle":"Siemens 6AG1132-4HB12-2AB0 SIPLUS ET 200S Relay Output, 5 A","metaDescription":"SIPLUS ET 200S 2DQ relay output module, 5 A, 24 V DC supply, conformal coated. Extended temp range -25 to 60 °C. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"Max.":"60 °C; = Tmax","Min.":"-25 °C; = Tmin","Depth":"52 mm","Width":"15 mm","Height":"81 mm","With Packing":"2 bit","Shielded, Max.":"1 000 m","Weight, approx.":"50 g","lifecycle_stage":"current","Power loss, typ.":"0.6 W","Rated value (DC)":"24 V; From power module","Unshielded, Max.":"600 m","On Lamp Load, Max.":"2 Hz","Between The Channels":"Yes","Diagnostics function":"No","Type of digital output":"Relays","Short-circuit protection":"No","Number of digital outputs":"2","With Inductive Load, Max.":"0.5 Hz","With Resistive Load, Max.":"2 Hz","For Signal \"1\" Rated Value":"5 A","Controlling a digital input":"Yes","Response to CPU/master STOP":"Substitute a value/keep last value","Reverse polarity protection":"Yes","Substitute values connectable":"Yes; 0/1","Address space per module, max.":"1 byte","Thermal continuous current, max.":"5 A","from backplane bus 3.3 V DC, max.":"10 mA","For Signal \"1\" Minimum Load Current":"8 mA","Between The Channels And Backplane Bus":"Yes","Status indicator digital output (green)":"Yes","Between the channels and load voltage L+":"Yes","from load voltage L+ (without load), max.":"30 mA","Installation altitude above sea level, max.":"2 000 m","Limitation of inductive shutdown voltage to":"No","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e51396e92b3a763c69906944371f4bb2.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=260814&mlfb=6AG1132-4HB12-2AB0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6AG1132-4HB12-2AB0/alternatives.json"},"ai":{"faq":[{"question":"Is the Siemens 6AG1132-4HB12-2AB0 obsolete?","answer":"No, this module is listed as current production — it is the SIPLUS spare part variant of the standard 6ES7132-4HB12-0AB0, with conformal coating and extended temperature range."},{"question":"What is the difference between 6AG1132-4HB12-2AB0 and 6ES7132-4HB12-0AB0?","answer":"The 6AG1132-4HB12-2AB0 is the SIPLUS version with conformal coating and an extended temperature range of -25 °C to +60 °C, compared to the standard 0AB0 which lacks conformal coating and has a narrower temperature range. The electrical specifications are otherwise identical."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1132-4HB12-2AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1132-4HB12-2AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}