{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1132-6BF00-7CA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1132-6BF00-7CA0","canonicalUrl":"https://aoctrl.com/siemens/6AG1132-6BF00-7CA0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1132-6BF00-7CA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS S7-1500 6AG1132-6BF00-7CA0 digital output module, 4 source outputs (PNP) 24 V DC, diagnostics per channel, 15 mm width.","salesMarkdown":"## Module overview The 6AG1132-6BF00-7CA0 is a current-production SIPLUS S7-1500 digital output module with four source (PNP) outputs, rated 24 V DC and 4 A total for the module. Each channel delivers up to 4 A at up to 60 °C, with a typical response time of 50 µs on and 100 µs off. Diagnostic capabilities per channel include wire-break detection (response threshold 0.7 to 1.3 A) and short-circuit protection, with a dedicated red LED per channel. A green/red DIAG LED provides module-level status. Firmware version V1.2 is field-upgradeable, and the module supports isochronous mode and I&M data (I&M0 to I&M3) for asset tracking. For panels originally specified with the 6AG1123-2DB03-2AX0 digital input module, the mechanical footprint and BaseUnit are identical, so this output module fits the same slot. However, wiring differs because the output module requires load supply connections and outputs are current-sourcing (PNP) rather than inputs. The channel assignment and terminal plan change accordingly. ## Fault isolation and diagnostics Channel-by-channel diagnostics flag wire-break and short-circuit conditions via red LEDs and the diagnostic alarm. The module supports group error reporting. Maximum cable length is 1 000 m shielded or 600 m unshielded. For lamp loads, the maximum switching frequency is 10 Hz. The module is current-sourcing only (no current-sinking). This is a current-production part, actively available and recommended for new designs.","metaTitle":"Siemens 6AG1132-6BF00-7CA0 SIPLUS S7-1500 DO 4x24V DC","metaDescription":"Current production 4-channel source output module for S7-1500. Diagnostics, wire-break, short-circuit per channel. 15 mm wide, 24 V DC, 4 A total. Order to RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"DQ":"Yes","MSO":"Yes","PWM":"No","Depth":"58 mm","Width":"15 mm","Height":"73 mm","I&M data":"Yes; I&M0 to I&M3","Wire-break":"Yes; channel by channel","Group error":"Yes","Lower Limit":"48 Ω","Upper Limit":"12 kΩ","For Uprating":"No","Oversampling":"No","Short-circuit":"Yes; channel by channel","Shielded, Max.":"1 000 m","Current-sinking":"No","Weight, approx.":"30 g","lifecycle_stage":"current","\"0\" To \"1\", Typ.":"50 µs","\"1\" To \"0\", Typ.":"100 µs","Current-sourcing":"Yes","Diagnostic alarm":"Yes","Firmware version":"V1.2","Isochronous mode":"Yes","Power loss, typ.":"1 W","Rated value (DC)":"24 V","Unshielded, Max.":"600 m","usable BaseUnits":"BU type A0","FW update possible":"Yes","On Lamp Load, Max.":"10 Hz","up to 60 °C, max.":"4 A","Between The Channels":"No","Diagnostics function":"Yes","Isolation tested with":"707 V DC (type test)","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Type of digital output":"Source output (PNP, current-sourcing)","For Channel Diagnostics":"Yes; red LED","Current per module, max.":"4 A","Response threshold, typ.":"0.7 to 1.3 A","Short-circuit protection":"Yes","Current consumption, max.":"45 mA; without load","Current per channel, max.":"0.5 A","Number of digital outputs":"8","With Inductive Load, Max.":"2 Hz","With Resistive Load, Max.":"100 Hz","Between Different Circuits":"75 V DC/60 V AC (base isolation)","Bus cycle time (TDP), min.":"500 µs","For Signal \"1\" Rated Value":"0.5 A","Controlling a digital input":"Yes","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C; = Tmax","Vertical Installation, Min.":"-40 °C; = Tmin","Horizontal Installation, Max.":"70 °C; = Tmax; > +60 °C max. total current 1.0 A","Horizontal Installation, Min.":"-40 °C; = Tmin (incl. condensation/frost)","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Suitable for safety functions":"No","Address space per module, max.":"1 byte; + 1 byte for QI information","DQ with energy-saving function":"No","For Redundant Control Of A Load":"Yes","Digital outputs, parameterizable":"Yes","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.1 mA","Between The Channels And Backplane Bus":"Yes","Execution and activation time (TCO), min.":"48 µs","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","Installation altitude above sea level, max.":"5 000 m","Limitation of inductive shutdown voltage to":"Typ. L+ (-50 V)","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","Color code for module-specific color identification plate":"CC02","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$109.22","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e51396e92b3a763c69906944371f4bb2.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=689856&mlfb=6AG1132-6BF00-7CA0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6AG1132-6BF00-7CA0/alternatives.json"},"ai":{"faq":[{"question":"What are its DQ and MSO ratings?","answer":"DQ (digital output) is Yes, confirming it is an output module. MSO (modular slave operation) is Yes, supporting isochronous mode for time-sensitive applications."},{"question":"Will this module drop into a panel designed for 6AG1123-2DB03-2AX0 without rewiring?","answer":"The mechanical footprint and BaseUnit (type A0) are identical, so the module fits the same slot. However, wiring is different — 6AG1132-6BF00-7CA0 is a digital output module with source outputs, whereas 6AG1123-2DB03-2AX0 is a digital input module. Terminal assignments and supply connections change."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1132-6BF00-7CA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1132-6BF00-7CA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}