{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1132-6BH01-7BA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1132-6BH01-7BA0","canonicalUrl":"https://aoctrl.com/siemens/6AG1132-6BH01-7BA0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1132-6BH01-7BA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens Siphus 6AG1132-6BH01-7BA0, digital output module, 24V DC, current-sourcing, diagnostic alarm, wire-break detection, 2-byte outputs.","salesMarkdown":"The 6AG1132-6BH01-7BA0: The temperature derating curve is the first thing to check when sizing loads. Up to 30 °C the module supplies 8 A across all mounting positions; at 40 °C that drops to 6 A, and above 50 °C it sits at 4 A. If your cabinet runs warm and the outputs are driving multiple coils, that 4 A limit will determine your channel count. Wire-break detection is set to trip between 48 Ω and 12 kΩ. That range catches an open field wire without nuisance tripping on a normal load — useful when a relay coil or solenoid goes open and you need the alarm before the process drifts. Switching times are 50 µs (0→1) and 100 µs (1→0), fast enough for most industrial sequences but not for high-speed PWM or isochronous motion — the module carries no PWM or isochronous mode capability, confirmed by the spec flags. Diagnostic alarms cover wire-break and both short-circuit-to-M and short-circuit-to-L+ faults, all reported module-wise. That means a single fault on any channel flags the whole module — channel-level mapping is not available on this variant. The lifecycle stage is current. The module is available through normal Siemens distribution channels and is a standard catalog item.","metaTitle":"Siemens 6AG1132-6BH01-7BA0 Siphus DQ Module, 24V DC","metaDescription":"Active production Siphus digital output module, 24V DC current-sourcing with diagnostic alarms and wire-break detection. 8A derated to 4A above 50°C. RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"DQ":"Yes","MSO":"No","PWM":"No","Depth":"58 mm","Width":"15 mm","Height":"73 mm","Inputs":"+ 2 bytes for QI information","Outputs":"2 byte","I&M data":"Yes; I&M0 to I&M3","Wire-break":"Yes; Module-wise","Lower Limit":"48 Ω","Upper Limit":"12 kΩ","For Uprating":"No","Oversampling":"No","Shielded, Max.":"1 000 m","Current-sinking":"No","Weight, approx.":"30 g","lifecycle_stage":"current","\"0\" To \"1\", Typ.":"50 µs","\"1\" To \"0\", Typ.":"100 µs","Current-sourcing":"Yes","Diagnostic alarm":"Yes","Isochronous mode":"No","Power loss, typ.":"1 W","Rated value (DC)":"24 V","Unshielded, Max.":"600 m","usable BaseUnits":"BU type A0","1-Wire Connection":"BU type A0","2-Wire Connection":"BU type A0 + Potential distributor module","3-Wire Connection":"BU type A0 + Potential distributor module","4-Wire Connection":"BU type A0 + Potential distributor module","Automatic encoding":"Yes","FW update possible":"No","On Lamp Load, Max.":"10 Hz","Short-circuit to M":"Yes; Module-wise","up to 30 °C, max.":"8 A; in all other mounting positions","up to 40 °C, max.":"6 A; in all other mounting positions","up to 50 °C, max.":"4 A; in all other mounting positions","up to 60 °C, max.":"4 A","Short-circuit to L+":"Yes; Module-wise","Between The Channels":"No","Diagnostics function":"Yes","Isolation tested with":"707 V DC (type test)","Redundancy capability":"Yes","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Open-circuit detection":"Yes","Type of digital output":"Source output (PNP, current-sourcing)","For Channel Diagnostics":"No","Current per module, max.":"8 A","Response threshold, typ.":"1 A","Short-circuit protection":"Yes","Current consumption, max.":"60 mA; without load","Current per channel, max.":"0.5 A","Mechanical coding element":"Yes","Number of digital outputs":"16","With Inductive Load, Max.":"2 Hz","With Resistive Load, Max.":"100 Hz","For Signal \"1\" Rated Value":"0.5 A","Controlling a digital input":"Yes","Reverse polarity protection":"Yes","Horizontal Installation, Max.":"70 °C; = Tmax; see Derating BasedOn (e.g. manual), additionally Tmax > 60 °C max. total current 1 A","Horizontal Installation, Min.":"-40 °C; = Tmin (incl. condensation/frost)","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Suitable for safety functions":"No","DQ with energy-saving function":"No","For Redundant Control Of A Load":"Yes","Digital outputs, parameterizable":"Yes","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.1 mA","Between The Channels And Backplane Bus":"Yes","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","Installation altitude above sea level, max.":"5 000 m","Limitation of inductive shutdown voltage to":"Typ. L+ (-50 V)","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","Suitable for safety-related tripping of standard modules":"Yes","Color code for module-specific color identification plate":"CC00","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$129.54","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e51396e92b3a763c69906944371f4bb2.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1116056&mlfb=6AG1132-6BH01-7BA0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6AG1132-6BH01-7BA0/alternatives.json"},"ai":{"faq":[{"question":"What does 'DQ Yes' mean on this module?","answer":"It means the module is a digital output (DQ) type; it provides 2 bytes of discrete outputs."},{"question":"Does the module support MSO (Motion/Servo Output)?","answer":"No, MSO is listed as 'No'. This module is a standard digital output block, not configured for motion or servo control."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1132-6BH01-7BA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1132-6BH01-7BA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}