{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1135-6GB00-7BA1","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1135-6GB00-7BA1","canonicalUrl":"https://aoctrl.com/siemens/6AG1135-6GB00-7BA1","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1135-6GB00-7BA1","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS S7-1200 analog output module, 2 AO, 24 V DC, current/voltage outputs, extended temperature range -40…70 °C, 15 mm wide, fits BU A0/A1.","salesMarkdown":"## SIPLUS analog output slice for the S7-1200 rack Siemens SIPLUS analog output module 6AG1135-6GB00-7BA1 gives you two independent analog output channels in a 15 mm-wide slice for BU type A0 or A1, operating from -40 °C to 70 °C horizontal without derating. No oversampling, no MSO, no isochronous mode. The module covers all three industrial current ranges: 0–20 mA (15-bit resolution), 4–20 mA (14-bit), and ±20 mA (16-bit including sign). That 16-bit signed range gives you full bipolar resolution for valve positioners or proportional actuators that need the negative swing. The voltage output is rated at 30 V, and the current outputs can drive a 500 Ω load at max – enough for a standard 4–20 mA loop to a remote I/P transducer. Diagnostic alarms, wire-break detection, and group error are wired in; the green channel-status LEDs and a green/red DIAG LED tell you at a glance if a field wire is open or the module is healthy. I&M data (I&M0 to I&M3) is supported, so your asset management system can read the module identity without climbing into the cabinet.","metaTitle":"Siemens 6AG1135-6GB00-7BA1 SIPLUS S7-1200 Analog Output, 2 A","metaDescription":"Siemens SIPLUS 6AG1135-6GB00-7BA1 analog output module for S7-1200. 2 channels, current (0–20 mA, 4–20 mA, ±20 mA 16-bit). Extended temp -40 to 70°C. Current production, RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"MSO":"No","Depth":"58 mm","Width":"15 mm","title":"6AG1135-6GB00-7BA1","Height":"73 mm","I&M data":"Yes; I&M0 to I&M3","0 to 20 mA":"Yes; 15 bit","Wire-break":"Yes","Group error":"Yes","description":"SIPLUS ET 200SP AQ 2xI standard, based on 6ES7135-6GB00-0BA1 with conformal coating, -40…+70 °C, analog output module, suitable for BU type A0, A1, color code CC00, module diagnostics, 16 bit","Oversampling":"No","4 mA to 20 mA":"Yes; 14 bit","Shielded, Max.":"1 000 m","Weight, approx.":"31 g","lifecycle_stage":"current","-20 mA to +20 mA":"Yes; 16 bit incl. sign","Diagnostic alarm":"Yes","Isochronous mode":"No","Power loss, typ.":"1.5 W","Rated value (DC)":"24 V","usable BaseUnits":"BU type A0, A1","FW update possible":"Yes","For Inductive Load":"0.5 ms","For Resistive Load":"0.1 ms; Typical value","Overflow/underflow":"Yes","Between The Channels":"No","Diagnostics function":"Yes","Output range scalable":"No","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","For Channel Diagnostics":"No","Voltages at the outputs":"30 V","Number of analog outputs":"2","Current consumption, max.":"110 mA","With Current Outputs, Max.":"500 Ω","Calibration possible in RUN":"No","Reverse polarity protection":"Yes","Horizontal Installation, Max.":"70 °C; = Tmax","Horizontal Installation, Min.":"-40 °C; = Tmin (incl. condensation/frost)","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Address space per module, max.":"4 byte; + 1 byte for QI information","Analog output with oversampling":"No","Cycle time (all channels), min.":"1 ms","Reparameterization possible in RUN":"Yes","Crosstalk between the outputs, min.":"-50 dB","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","Between The Channels And Backplane Bus":"Yes","For Current Output Two-Wire Connection":"Yes","Current, relative to output range, (+/-)":"0.3 %","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","With Current Outputs, Inductive Load, Max.":"1 mH","Installation altitude above sea level, max.":"5 000 m","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","Linearity error (relative to output range), (+/-)":"0.06 %","Temperature error (relative to output range), (+/-)":"0.01 %/K","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","Resolution with overrange (bit including sign), max.":"16 bit","Color code for module-specific color identification plate":"CC00","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Between The Channels And The Power Supply Of The Electronics":"Yes","Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)":"0.05 %","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e51396e92b3a763c69906944371f4bb2.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=803927&mlfb=6AG1135-6GB00-7BA1"},"ai":{"faq":[{"question":"What is the MSO (Millisecond Overlap) status?","answer":"MSO is No. The module does not support isochronous mode or oversampling. It is not designed for cycle-synchronous control loops."},{"question":"What is the operating temperature range?","answer":"Horizontal installation: -40 °C to 70 °C. The lower limit includes condensation or frost conditions, making this SIPLUS module suitable for unheated enclosures."},{"question":"Will this module drop into a panel that was built for 6AG1123-2DB03-2AX0?","answer":"No. 6AG1123-2DB03-2AX0 is a digital I/O module (SIPLUS), not an analog output module. Different function, different base unit assignment. Check your I/O map – if you need analog outputs, this is the correct slice, but it won’t replace a digital module without rewiring the backplane."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1135-6GB00-7BA1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1135-6GB00-7BA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}