{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1135-6TD00-2CA1","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1135-6TD00-2CA1","canonicalUrl":"https://aoctrl.com/siemens/6AG1135-6TD00-2CA1","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1135-6TD00-2CA1","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS S7-1200 6AG1135-6TD00-2CA1, 4 analog outputs, 16-bit signed, HART, 0-20 mA / 4-20 mA, diagnostics, 24 V DC, 1.7 W, 58 x 15 x 73 mm.","salesMarkdown":"## What it is & what it does The Siemens 6AG1135-6TD00-2CA1 is an analog output module for the SIPLUS S7-1200 system, designed for extended temperature range applications. It provides four analog outputs, each configurable for 0 to 20 mA or 4 to 20 mA with 16-bit signed resolution. HART protocol is supported per channel, allowing simultaneous analog control and HART communication on the same loop. Each output channel includes wire-break and short-circuit detection, diagnostic alarms, and green/red LED indication. The module reports diagnostic data via I&M data (I&M0 to I&M3) and supports firmware updates. Power draw is 1.7 W typical at 24 V DC, with a maximum current consumption of 125 mA. Module-wide supply voltage monitoring is included. The module mounts on a DIN rail using Siemens BaseUnits type A0 or A1, occupying a single 15 mm wide slot. Depth is 58 mm, height 73 mm. Isolation tested at 707 V DC between circuits. Galvanic isolation between the module and backplane: 60 V DC / 30 V AC between different circuits. Operating temperature: horizontal installation allows 0 to 60 °C (up to 70 °C with configured empty slots left and right), vertical installation 0 to 50 °C. Minimum -40 °C including condensation and frost.","metaTitle":"6AG1135-6TD00-2CA1 Analog Output, 4 Ch, 16-bit, HART","metaDescription":"Active production. 4 analog outputs, 0-20 mA, 16-bit signed, HART, wire-break detection, diagnostics, 1.7 W, 15 mm wide, 58 mm deep. Source to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"Depth":"58 mm","Width":"15 mm","title":"6AG1135-6TD00-2CA1","Height":"73 mm","I&M data":"Yes; I&M0 to I&M3","0 to 20 mA":"Yes; 16 bit incl. sign","Wire-break":"Yes; channel by channel","description":"SIPLUS ET 200SP AQ 4xI HART High Feature based on 6ES7135-6TD00-0CA1 with conformal coating, -40…+60 °C, analog HART output module, suitable for BU type A0, A1, color code CC00, channel diagnostics, 16-bit, +/-0.3%","4 mA to 20 mA":"Yes; 16 bit incl. sign","HART protocol":"Yes","Short-circuit":"Yes","Shielded, Max.":"800 m","Weight, approx.":"31 g","lifecycle_stage":"current","-20 mA to +20 mA":"No","Diagnostic alarm":"Yes","Power loss, typ.":"1.7 W","Rated value (DC)":"24 V","usable BaseUnits":"BU type A0, A1","FW update possible":"Yes","For Inductive Load":"2 ms","For Resistive Load":"2 ms; 750 ohm","Overflow/underflow":"Yes; channel by channel","For Capacitive Load":"2 ms","Between The Channels":"No","Diagnostics function":"Yes","Isolation tested with":"707 V DC (type test)","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","For Channel Diagnostics":"Yes; red LED","Voltages at the outputs":"30 V","Number of analog outputs":"4","Current consumption, max.":"125 mA","Between Different Circuits":"60 V DC/30 V AC","With Current Outputs, Max.":"750 Ω","Calibration possible in RUN":"No","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C; = Tmax","Vertical Installation, Min.":"-40 °C; = Tmin (incl. condensation/frost)","Horizontal Installation, Max.":"60 °C; = Tmax; +70 °C with configured empty slots to the left and right of the module","Horizontal Installation, Min.":"-40 °C; = Tmin (incl. condensation/frost)","Monitoring the supply voltage":"Yes; Module-wise","Substitute values connectable":"Yes","Address space per module, max.":"8 byte; + 1 byte for QI information","Cycle time (all channels), min.":"3 ms","Current consumption (rated value)":"115 mA","Reparameterization possible in RUN":"Yes","Crosstalk between the outputs, min.":"-50 dB","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","Current output, no-load voltage, max.":"28 V","Between The Channels And Backplane Bus":"Yes","For Current Output Two-Wire Connection":"Yes","Address space per module with HART, max.":"28 byte; + 1 byte for QI information","Between the channels and load voltage L+":"Yes","Current, relative to output range, (+/-)":"0.1 %","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","With Current Outputs, Inductive Load, Max.":"10 mH","Installation altitude above sea level, max.":"5 000 m","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","Linearity error (relative to output range), (+/-)":"0.03 %","Temperature error (relative to output range), (+/-)":"0.003 %/K","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","Color code for module-specific color identification plate":"CC00","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)":"0.02 %","Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)":"0.03 %","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e51396e92b3a763c69906944371f4bb2.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1437604&mlfb=6AG1135-6TD00-2CA1"},"ai":{"faq":[{"question":"Will this module fit in a panel designed for 6AG1123-2DB03-2AX0?","answer":"Physically, the outer dimensions match the S7-1200 form factor (same width, depth, height). However, 6AG1123-2DB03-2AX0 is a digital input module. The analog output module uses different BaseUnit types (A0/A1) and has different wiring. Backplane compatibility is the same, but rewiring the field termination is required."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1135-6TD00-2CA1","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1135-6TD00-2CA1 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}