{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1136-6BA01-2CA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1136-6BA01-2CA0","canonicalUrl":"https://aoctrl.com/siemens/6AG1136-6BA01-2CA0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1136-6BA01-2CA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens, SIPLUS ET 200SP, digital input module, 6AG1136-6BA01-2CA0, 8 DI, 24 V DC, SIL 3, width 15 mm.","salesMarkdown":"The 6AG1136-6BA01-2CA0: It sits on a BU type A0 base unit, occupies 15 mm of DIN rail, and supports diagnostic alarms, channel status LEDs, and I&M data (I&M0 to I&M3) for clear asset tracking during commissioning. ## Supply voltage tolerance and wiring The module accepts 24 V DC with a minimum L+ of -1.5 V, meaning it can operate reliably even if the supply rail drops 1.5 V below nominal — useful for long cable runs or heavily loaded backplanes. Input characteristics: signal 0 from -30 to +5 V, signal 1 from +15 to +30 V with a typical sink current of 3.7 mA at 24 V. Filter times are adjustable between 0.4 ms and 20 ms (off->on and on->off). ## Safety and diagnostics Rated SIL 3, this module can be used in safety functions up to that integrity level when paired with a failsafe CPU (S7-300/400F). It supports parameterizable diagnostics, diagnostic alarms, and channel-wise red error LEDs. Isolation tested at 707 V DC (type test). Short-circuit protection is electronic with a response threshold between 0.7 A and 1.8 A per channel. Fits the standard ET 200SP form factor: 15 mm wide, 58 mm deep, 73 mm high. Shielded cable runs up to 1 000 m; unshielded up to 500 m. No parameterizable inputs; the module automatically encodes the configuration. Firmware updates are possible. Power consumption is 2 W typical, with a max current draw of 40 mA without load.","metaTitle":"Siemens 6AG1136-6BA01-2CA0 SIPLUS ET 200SP 8DI, 24V, SIL3","metaDescription":"Active production Siemens 6AG1136-6BA01-2CA0 SIPLUS ET 200SP digital input module, 8 DI, 24 V DC, SIL 3, width 15 mm. Sourced to order – request quote for your quantity.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"24 V":"Yes; min. L+ (-1.5 V)","Depth":"58 mm","Width":"15 mm","title":"6AG1136-6BA01-2CA0","Height":"73 mm","Inputs":"7 byte; S7-300/400F CPU, 6 byte","Outputs":"5 byte; S7-300/400F CPU, 4 byte","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","ERROR LED":"Yes; red LED","description":"SIPLUS ET 200SP F-DI 4/8x24 V DC HF based on 6ES7136-6BA01-0CA0 with conformal coating, -40…+60 °C, fail-safe digital inputs up to PL e (ISO 13849-1), SIL3 (IEC 61508)","For Signal \"0\"":"-30 to +5 V","For Signal \"1\"":"+15 to +30 V","Shielded, Max.":"1 000 m","Parameterizable":"No","Weight, approx.":"29 g","lifecycle_stage":"current","Diagnostic alarm":"Yes","Power loss, typ.":"2 W","Rated value (DC)":"24 V","Unshielded, Max.":"500 m","usable BaseUnits":"BU type A0","Number of outputs":"8","Source/sink input":"Yes; P-reading","Automatic encoding":"Yes","FW update possible":"Yes","Hardware interrupt":"No","At \"0\" To \"1\", Max.":"20 ms","At \"0\" To \"1\", Min.":"0.4 ms","At \"1\" To \"0\", Max.":"20 ms","At \"1\" To \"0\", Min.":"0.4 ms","Between The Channels":"No","Diagnostics function":"Yes","For Signal \"1\", Typ.":"3.7 mA","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 61508":"SIL 3","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","For Channel Diagnostics":"Yes; red LED","Number of digital inputs":"8","Short-circuit protection":"Yes; Electronic (response threshold 0.7 A to 1.8 A)","Current consumption, max.":"40 mA; without load","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C; = Tmax","Vertical Installation, Min.":"-40 °C; = Tmin","Horizontal Installation, Max.":"60 °C; = Tmax; +70 °C with configured empty slots to the left and right of the module","Horizontal Installation, Min.":"-40 °C; = Tmin (incl. condensation/frost)","Suitable for safety functions":"Yes","Output current per module, max.":"800 mA; Total current of all encoders","Electronic coding element type F":"Yes","Output current per channel, max.":"300 mA","Category according to ISO 13849-1":"Cat. 4","Reparameterization possible in RUN":"No","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","Between The Channels And Backplane Bus":"Yes","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","Performance level according to ISO 13849-1":"PLe","Installation altitude above sea level, max.":"4 000 m","STEP 7 configurable/integrated from version":"as 6ES7136-6BA00-0CA0","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","power supply according to NEC Class 2 required":"No","Low demand mode: PFDavg in accordance with SIL3":"< 2.00E-05","Ambient air temperature-barometric pressure-altitude":"Restrictions for installation altitudes > 2 000 m, see entry ID: 109771992","High demand/continuous mode: PFH in accordance with SIL3":"< 1.00E-09 1/h","Color code for module-specific color identification plate":"CC01","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Between The Channels And The Power Supply Of The Electronics":"No","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$327.66","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e51396e92b3a763c69906944371f4bb2.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1536552&mlfb=6AG1136-6BA01-2CA0"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1136-6BA01-2CA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1136-6BA01-2CA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}