{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1136-6DC00-2CA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1136-6DC00-2CA0","canonicalUrl":"https://aoctrl.com/siemens/6AG1136-6DC00-2CA0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1136-6DC00-2CA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS ET200SP 6AG1136-6DC00-2CA0, 8-channel digital output transistor module, 24 V DC, 0.5 A per channel, BU type A0, active production.","salesMarkdown":"The Siemens 6AG1136-6DC00-2CA0 is an 8-output transistor module for the ET 200SP distributed I/O system, part of the SIPLUS range. It switches 24 V DC loads at up to 0.5 A per channel, with a total module current of 3 A (derated at higher temperatures). Rated SIL 3, includes per-channel diagnostics (short-circuit protection, diagnostic alarm) and a red error LED. It uses BaseUnit type A0, so it mounts directly in any ET 200SP station and accepts the same terminal blocks as the standard 6ES7136-6AB00-0CA1. ## Integration Notes for Panel Builders Width is 15 mm (one slot), depth 58 mm, height 73 mm. The module fits in a standard ET 200SP rail with adjacent slots; observe left/right slot configuration when exceeding 60 °C ambient. Current per channel is 0.5 A maximum; at 50 °C the module derates to 2 A total, and at 70 °C it requires configured slots on both sides. Plan the thermal layout accordingly. Unshielded cable runs up to 100 m; diagnostics respond at a minimum load current of 0.7 A for open-circuit detection. Short-circuit protection is built in. Firmware update via the backplane is supported; I&M data (I&M0 to I&M3) can be written for asset tracking.","metaTitle":"Siemens 6AG1136-6DC00-2CA0 SIPLUS ET200SP 8DO, 0.5A","metaDescription":"Siemens SIPLUS ET200SP 8DO transistor output module, 24V DC, 0.5A/ch, active production. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"Depth":"58 mm","Width":"15 mm","title":"6AG1136-6DC00-2CA0","Height":"73 mm","Inputs":"6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA","Outputs":"6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","ERROR LED":"Yes; red LED","Lower Limit":"48 Ω","Upper Limit":"12 000 Ω","description":"SIPLUS ET 200SP F-DQ 8x24VDC/0.5A PP HF based on 6ES7136-6DC00-0CA0 with conformal coating, -30…+60 °C, fail-safe digital outputs Cat. 4, PL e (EN ISO 13849-1) up to SIL 3 (IEC 61508)","Shielded, Max.":"100 m","Weight, approx.":"48 g","lifecycle_stage":"current","Diagnostic alarm":"Yes","Power loss, typ.":"3 W","Rated value (DC)":"24 V","Unshielded, Max.":"100 m","usable BaseUnits":"BU type A0","FW update possible":"Yes","On Lamp Load, Max.":"10 Hz; Symmetrical","up to 40 °C, max.":"3 A; note derating data in the manual","up to 50 °C, max.":"2 A; note derating data in the manual","up to 60 °C, max.":"2 A; note derating data in the manual","up to 70 °C, max.":"2 A; note derating information in the manual; only with configured slots to the left and right of the module","Between The Channels":"No","Diagnostics function":"Yes","For Signal \"1\", Min.":"24 V; L+ (-0.5 V)","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 61508":"SIL 3","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; green/red DIAG LED","Open-circuit detection":"No","Type of digital output":"Transistor","For Channel Diagnostics":"Yes; red LED","Current per module, max.":"3 A; note derating data in the manual","Response threshold, typ.":"Min. 0.7 A","Short-circuit protection":"Yes","Current consumption, max.":"21 mA; From the backplane bus","Current per channel, max.":"0.5 A; note derating data in the manual","Number of digital outputs":"8","With Inductive Load, Max.":"0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical","With Resistive Load, Max.":"30 Hz; Symmetrical","For Signal \"1\" Rated Value":"0.5 A","With Capacitive Load, Max.":"2 Hz; Symmetrical","Controlling a digital input":"Yes","Reverse polarity protection":"Yes","Vertical Installation, Max.":"50 °C; = Tmax","Vertical Installation, Min.":"-30 °C; = Tmin","Horizontal Installation, Max.":"60 °C; = Tmax; +70 °C with configured empty slots to the left and right of the module","Horizontal Installation, Min.":"-30 °C; = Tmin (incl. condensation/frost)","Substitute values connectable":"No","Suitable for safety functions":"Yes","Digital outputs, parameterizable":"Yes","Electronic coding element type F":"Yes","Category according to ISO 13849-1":"Cat. 4","Current consumption (rated value)":"75 mA; without load","permissible range, lower limit (DC)":"20.4 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.5 mA","Between The Channels And Backplane Bus":"Yes","Power available from the backplane bus":"70 mW","Monitoring of the supply voltage (PWR-LED)":"Yes; green PWR LED","Performance level according to ISO 13849-1":"PLe","Installation altitude above sea level, max.":"4 000 m","Limitation of inductive shutdown voltage to":"Typ. -39 V","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","Low demand mode: PFDavg in accordance with SIL3":"< 6.00E-05","Ambient air temperature-barometric pressure-altitude":"Restrictions for installation altitudes > 2 000 m, see entry ID: 109771992","High demand/continuous mode: PFH in accordance with SIL3":"< 2.00E-09 1/h","Color code for module-specific color identification plate":"CC02","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Between The Channels And The Power Supply Of The Electronics":"No","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e51396e92b3a763c69906944371f4bb2.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1133399&mlfb=6AG1136-6DC00-2CA0"},"ai":{"faq":[{"question":"What is the closest functional second-source — 6ES7136-6AB00-0CA1?","answer":"The standard ET 200SP output module 6ES7136-6AB00-0CA1 is functionally equivalent (8× 0.5 A, same diagnostics and base unit), but lacks the SIPLUS wide-temperature rating and conformal coating. It is a direct mechanical and electrical replacement for non-harsh environments."},{"question":"Will 6AG1136-6DC00-2CA0 drop into a panel specified around 6ES7136-6AB00-0CA1 without rewiring?","answer":"Yes — both modules use the same BU type A0 base unit, same terminal assignments, and same width. No rewiring or mechanical changes are needed."},{"question":"What is the module's width and depth?","answer":"Width is 15 mm (one slot), depth is 58 mm."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1136-6DC00-2CA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1136-6DC00-2CA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}