{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1153-2BA10-7XB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1153-2BA10-7XB0","canonicalUrl":"https://aoctrl.com/siemens/6AG1153-2BA10-7XB0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1153-2BA10-7XB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS extreme IM 153-2 DP interface, order code 6AG1153-2BA10-7XB0, PROFIBUS DP up to 12 Mbit/s, -40 to 70 °C, 24 VDC.","salesMarkdown":"The Siemens 6AG1153-2BA10-7XB0 is a PROFIBUS DP interface module for the ET 200M distributed I/O system, built to the SIPLUS extreme spec with a -40 to 70 °C operating range. It communicates at up to 12 Mbit/s over RS-485, handles 244 bytes each of inputs and outputs, and draws a maximum 650 mA from a 24 VDC supply. The firmware ships at V6.0.0, and it supports STEP 7 configuration as well as third-party DP masters importing the GSD file SI05801E.GSG. If you're dropping this into an existing ET 200M station, the 40 mm width and the standard mounting scheme mean it fits the same backplane slot — no panel rework. The I²t value of 0.1 A²·s is what you'd pass to the panel builder for backplane fuse coordination; the inrush current typ 3 A helps size the 24 V supply branch. The temperature range covers non-conditioned cabinets, so no heater is needed for cold starts down to -25 °C (cold restart minimum).","metaTitle":"Siemens 6AG1153-2BA10-7XB0 PROFIBUS DP IM, -40-70°C","metaDescription":"Active PROFIBUS DP interface for ET 200M, rated -40 to 70 °C, 12 Mbit/s, 24 VDC, firmware V6.0.0. Sourced to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["PLCs (Programmable Logic Controllers)"],"specifications":{"I2t":"0.1 A²·s","Max.":"70 °C","Min.":"-40 °C","Depth":"117 mm","Width":"40 mm","title":"6AG1153-2BA10-7XB0","Height":"125 mm","Inputs":"244 byte","STEP 7":"Yes; STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file","TCP/IP":"No","Outputs":"244 byte","Accuracy":"1 ms; 1 ms at up to 8 modules; 10 ms at up to 12 modules","GSD file":"SI05801E.GSG","Time format":"RFC 1119","description":"SIPLUS ET 200M IM153-2 (*BA02) based on 6ES7153-2BA10-0XB0 with conformal coating, -40…+70 °C, start up -25 °C, connection ET 200M IM 153-2 High Feature for max. 12 S7-300 modules with redundancy capability, time stamp. suitable for isochronous mode new features: up to 12 modules can be used Slave Initiative for Drive ES and Switch ES expanded quantity structure for HART auxiliary variables operation of the 64-channel modules 32 signals/slot","SYNC capability":"Yes","Time resolution":"0.466 ns","Weight, approx.":"360 g","lifecycle_stage":"current","Firmware version":"V6.0.0","Power loss, typ.":"5.5 W","Rated value (DC)":"24 V","FREEZE capability":"Yes","Inrush current, typ.":"3 A","At cold restart, min.":"-25 °C","Isolation tested with":"Isolation voltage 500 V","Transmission procedure":"RS 485","IP degree of protection":"IP20","Transmission rate, max.":"12 Mbit/s","Design of the connection":"9-pin sub D socket","Current consumption, max.":"650 mA; with 24 V DC supply","Number of message buffers":"15","Automatic Baud Rate Search":"Yes","Messages per message buffer":"20","Potential separation exists":"Yes","Time stamp on signal change":"rising / falling edge as signal entering or exiting","Number of node addresses, max.":"1 to 125 permitted","for backplane bus (5 V DC), max.":"1.5 A","Bus protocol/transmission protocol":"PROFIBUS DP to EN 50170","permissible range, lower limit (DC)":"20.4 V","permissible range, upper limit (DC)":"28.8 V","Output current of the interface, max.":"70 mA","Automatic Detection Of Transmission Rate":"Yes","Mains/voltage failure stored energy time":"5 ms","Number of stampable digital inputs, max.":"128; Max. 128 signals/station; max. 32 signals/slot","Installation altitude above sea level, max.":"5 000 m","STEP 7 configurable/integrated from version":"see entry ID: 109746275","Number of modules per DP slave interface, max.":"12","Direct data exchange (slave-to-slave communication)":"Yes; as publisher with all IO, as subscriber with F-IO only","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","External Protection For Power Supply Lines (Recommendation)":"2,5 A","Time interval for transmitting the message buffer if a message is present":"1 000 ms","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$590.55","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a8a36b8f10a30a3bcb80310048e52ad2.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=571018&mlfb=6AG1153-2BA10-7XB0"},"ai":{"faq":[{"question":"What supply voltage does it require?","answer":"It runs on 24 VDC, with a permissible range of 20.4 to 28.8 VDC. Maximum current draw is 650 mA."},{"question":"What is the operating temperature range?","answer":"The SIPLUS extreme rating covers -40 to 70 °C ambient. Cold restart minimum is -25 °C."},{"question":"What PROFIBUS speed does it support?","answer":"Maximum transmission rate is 12 Mbit/s, with automatic baud rate detection enabled. The protocol is PROFIBUS DP to EN 50170."},{"question":"Does it come with a GSD file?","answer":"Yes, the GSD file is SI05801E.GSG, used for integrating the module into a PROFIBUS master configuration, including non-Siemens tools."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1153-2BA10-7XB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1153-2BA10-7XB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}