{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1222-1BD30-5XB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1222-1BD30-5XB0","canonicalUrl":"https://aoctrl.com/siemens/6AG1222-1BD30-5XB0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1222-1BD30-5XB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS S7-1200 SB 1222, 4 DQ 24 V DC digital output module, 0.1 A per channel, conformal coated, -40 to +70 °C, order code 6AG1222-1BD30-5XB0.","salesMarkdown":"The Siemens 6AG1222-1BD30-5XB0 is a SIPLUS variant of the S7-1200 SB 1222 signal board, delivering 4 digital outputs at 24 V DC with a maximum per-channel current of 0.1 A. It snaps onto the front of an S7-1200 CPU, adding a compact output slice without expanding the DIN-rail footprint. This makes it suitable for cold storage, outdoor cabinets, or applications near washdown zones where condensation is a risk. Each of the 4 outputs is rated 0.1 A maximum with resistive load at 24 V DC. The per-channel supply current draw is 4 mA max, and the residual current for signal \"0\" is held to 10 µA — important for preventing leakage through downstream loads like small relay coils or LED indicators. The module draws 50 mA typ from the 5 V DC backplane bus. Total power loss is 0.5 W typ — negligible in a crowded enclosure, but worth noting if the CPU's backplane supply is already loaded near its limit. There is no short-circuit protection on the outputs. The load wiring must be fused externally, or the application must rely on the load's own current-limiting behaviour. For signal \"1\", the permissible voltage range is L+ (-1.5 V) to L+; for signal \"0\", the max voltage is 1 V with a 10 kΩ load. ## Environmental endurance and coating The conformal coating (IPC-CC-830A Class A) protects against fouling per EN 60664-3 Type 1, and the module is resistant to commercially available coolants, lubricants, diesel, and oil droplets in the air. It also meets ANSI/ISA-71.04 environmental conditions for process control systems, including Level GX Group A/B gas concentrations, Level LC3 salt spray, and Level LB3 oil. Installation altitude is rated up to 5 000 m, with temperature derating above 2 000 m per the spec table. This covers high-altitude installations like mining or mountain-top telecom shelters without requiring a separate derating calculation. Diagnostics and alarms are supported, including readback of the output status. The module is configurable in STEP 7 TIA Portal (see entry ID 109746275 for version requirements). Unshielded cable runs are limited to 50 m max; shielded runs are not separately specified but standard S7-1200 wiring practice applies.","metaTitle":"Siemens 6AG1222-1BD30-5XB0 SIPLUS S7-1200 Digital Output","metaDescription":"Siemens 6AG1222-1BD30-5XB0 SIPLUS S7-1200 digital output module with conformal coating. 4 DQ 24V DC, 0.1 A per channel, -40 to 70 °C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"Max.":"70 °C","Min.":"-40 °C","Depth":"21 mm","Width":"38 mm","title":"6AG1222-1BD30-5XB0","Alarms":"Yes","Height":"62 mm","Plastic":"Yes","Upper Limit":"10 Ω","description":"SIPLUS S7-1200 SB 1222 4DQ based on 6ES7222-1BD30-0XB0 with conformal coating, -40…+60 °C, start up -25 °C, digital output 4 DQ 24 V DC 200 kHz","In Groups Of":"1","Shielded, Max.":"50 m","Weight, approx.":"40 g","lifecycle_stage":"current","Power loss, typ.":"0.5 W","Rated value (DC)":"24 V","Diagnostics function":"Yes","For Signal \"0\", Max.":"1 V; with 10 kOhm load","For Signal \"1\", Min.":"L+ (-1.5 V)","Supply current, max.":"4 mA; per channel","Short-circuit protection":"No","For Status Of The Outputs":"Yes","Number of digital outputs":"4","With Resistive Load, Max.":"0.1 A","from backplane bus 5 V DC, typ.":"50 mA","For Signal \"0\" Residual Current, Max.":"10 µA","For Signal \"1\" Permissible Range, Max.":"0.1 A","Installation altitude above sea level, max.":"5 000 m","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","STEP 7 TIA Portal configurable/integrated from version":"see entry ID: 109746275","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$287.55","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/94d667fcb316cd015f92d676185d4a11.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=349381&mlfb=6AG1222-1BD30-5XB0"},"ai":{"faq":[{"question":"What is the difference between 6AG1222-1BD30-5XB0 and 6ES7222-1BD30-0XB0?","answer":"The SIPLUS variant also adds resistance to coolants, lubricants, and salt spray per ANSI/ISA-71.04, making it the correct choice for harsh-environment installations."},{"question":"Is 6AG1222-1BD30-5XB0 compatible with Siemens S7-1200?","answer":"Yes. It is a SIPLUS S7-1200 SB 1222 signal board that plugs directly into the front of an S7-1200 CPU. It is configurable in STEP 7 TIA Portal (see entry ID 109746275 for the minimum version)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1222-1BD30-5XB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1222-1BD30-5XB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}