{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1232-4HB30-2XB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1232-4HB30-2XB0","canonicalUrl":"https://aoctrl.com/siemens/6AG1232-4HB30-2XB0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1232-4HB30-2XB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS S7-1200 SM 1232 analog output module, 6AG1232-4HB30-2XB0, 2 channels, voltage or current, 14-bit / 13-bit resolution, conformal coating, -25 to +70 °C, IP20.","salesMarkdown":"## What this SIPLUS module is — and why the coating matters The 6AG1232-4HB30-2XB0 is a SIPLUS variant of the standard S7-1200 SM 1232 2AQ analog output module (base order 6ES7232-4HB30-0XB0) with conformal coating and an extended temperature range of -25 °C to +70 °C. That coating is the differentiator: it protects the PCB against condensation, corrosive gases, and dust ingress in environments where a standard uncoated module would fail — think cold-chain refrigeration, outdoor cabinets, or food-processing washdown zones where the panel isn't sealed. The module provides two analog outputs configurable individually as voltage (±10 V, 14-bit resolution) or current (0–20 mA, 13-bit resolution). The 14-bit voltage path gives 0.3 % accuracy relative to the output range, and the current output can drive loads up to 600 Ω. That's enough headroom to feed a remote VFD analog input or a chart recorder without a signal conditioner. ## Temperature range and environmental tolerance Rated for -40 °C storage and -25 °C to +70 °C operation, the module also carries altitude derating: full spec at 0–2000 m, then a 10 K temperature reduction from 2000–3500 m, and a 20 K reduction from 3500–5000 m. If your panel sits at a high-altitude installation, budget the ambient temperature inside the enclosure accordingly. The module draws 45 mA from the 24 V DC supply plus 80 mA from the 5 V backplane bus, for a typical power loss of 1.5 W. That's low enough that multiple modules can sit adjacent without forced cooling in a standard IP20 cabinet. ## Diagnostics and monitoring Built-in diagnostics cover wire-break detection on current outputs, short-circuit monitoring, supply voltage supervision, and diagnostic alarms. The module reports the status of each output channel and triggers an alarm on fault — useful for a maintenance team that needs to know which loop dropped before the line stops.","metaTitle":"Siemens 6AG1232-4HB30-2XB0 SIPLUS SM 1232 Analog Output","metaDescription":"SIPLUS S7-1200 SM 1232 analog output module, 2 channels, -25 to +70 °C, conformal coated. 14-bit voltage / 13-bit current resolution. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Analog Output Modules"],"specifications":{"Max.":"70 °C","Min.":"-40 °C","Depth":"75 mm","Width":"45 mm","Alarms":"Yes","Height":"100 mm","CE mark":"Yes","Plastic":"Yes","0 to 20 mA":"Yes","Wire-break":"Yes","FM approval":"Yes","Short-circuit":"Yes","-10 V to +10 V":"Yes","For Maintenance":"Yes","Weight, approx.":"180 g","lifecycle_stage":"current","Diagnostic alarm":"Yes","Power loss, typ.":"1.5 W","Rated value (DC)":"24 V","Fall height, max.":"0.3 m; five times, in product package","Diagnostics function":"Yes","IP degree of protection":"IP20","Number of analog outputs":"2; Current or voltage","Required Front Connector":"Yes","Common mode voltage, max.":"12 V","Current consumption, typ.":"45 mA","For Status Of The Outputs":"Yes","With Current Outputs, Max.":"600 Ω","With Voltage Outputs, Min.":"1 000 Ω","Monitoring the supply voltage":"Yes","from backplane bus 5 V DC, typ.":"80 mA","Current, relative to output range, (+/-)":"0.3 %","Voltage, relative to output range, (+/-)":"0.3 %","Temperature error (relative to output range), (+/-)":"25 °C ±0.3%, to 55 °C ±0.6% total measurement range","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","Resolution with overrange (bit including sign), max.":"14 bit; Voltage: 14 bit; Current : 13 bit"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=53069&mlfb=6AG1232-4HB30-2XB0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6AG1232-4HB30-2XB0/alternatives.json"},"ai":{"faq":[{"question":"What approvals does 6AG1232-4HB30-2XB0 carry?","answer":"The module carries CE mark and FM approval. It is designed for use in industrial environments with the extended temperature range and conformal coating."},{"question":"What is the resolution of the analog outputs on 6AG1232-4HB30-2XB0?","answer":"Voltage outputs (±10 V) provide 14-bit resolution; current outputs (0–20 mA) provide 13-bit resolution. Accuracy is ±0.3 % of the output range for both types."},{"question":"Does 6AG1232-4HB30-2XB0 require a front connector?","answer":"Yes, a front connector is required and ordered separately. The module does not include one in the box."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1232-4HB30-2XB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1232-4HB30-2XB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}