{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1322-1CF00-7AA0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1322-1CF00-7AA0","canonicalUrl":"https://aoctrl.com/siemens/6AG1322-1CF00-7AA0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1322-1CF00-7AA0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens S7-300 SM 322 digital output module, 6AG1322-1CF00-7AA0, 8 channels, 48-125 VDC, 4 A per channel, -40 to 70 °C, EN 50155 railway certified.","salesMarkdown":"## Active production — extended temperature S7-300 DO The 6AG1322-1CF00-7AA0: The wide supply range (48-125 VDC) covers nominal 48 V, 60 V, 72 V, 110 V, and 125 V DC control buses common in rail, marine, and industrial sites — no separate module variant needed for each rail voltage. ## Railway temperature grade and environmental certs The UL listing (File E239877) and CE, EAC, KC, and RCM marks cover North American, European, Eurasian, Korean, and Australian regulatory acceptance. The 1500 V AC channel-to-channel isolation test confirms galvanic separation between outputs — critical when adjacent channels feed different control circuits or share a common fault path. ## Current derating and output characteristics The 4 A per-channel rating holds at 40 °C and 50 °C, then drops to 3 A at 60 °C and 1 A at 70 °C. The response threshold is 4.4 A typical — the module trips the group-error LED (SF red) when an output exceeds this level, but there is no per-channel fuse or diagnostic alarm. Spare fuses (6.3 A / 250 V, quick-response, 5x20 mm) are carried on the module for field replacement. Switching times are 2 ms max (0→1) and 15 ms max (1→0), with a maximum lamp-load frequency of 10 Hz. The minimum signal-1 voltage is L+ (-1.2 V), so the output stage saturates close to the supply rail — important for long cable runs where voltage drop is a concern. ## Physical fit and cable length limits The module occupies one S7-300 slot (40 mm wide, 125 mm high, 120 mm deep, ~250 g) and requires a 20-pin front connector (ordered separately). Unshielded cable runs up to 600 m; shielded runs up to 1000 m — the 600 m unshielded limit is the practical constraint for most plant-floor wiring without conduit. Typical power loss is 7.2 W — account for this in the enclosure thermal budget, especially when multiple modules populate the rack in a sealed cabinet.","metaTitle":"Siemens 6AG1322-1CF00-7AA0 SM 322 DO 48V-125V DC, 4A","metaDescription":"Siemens 6AG1322-1CF00-7AA0 S7-300 digital output module, 48-125 VDC, 4 A/ch, -40 to 70 °C, EN 50155, UL E239877. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Digital Output Modules"],"specifications":{"Max.":"70 °C","Min.":"-40 °C","Depth":"120 mm","Width":"40 mm","title":"6AG1322-1CF00-7AA0","Alarms":"No","Height":"125 mm","CE mark":"Yes","EN 50155":"Yes; T1 Category 1 Class A/B horizontal mounting position","Fuse blown":"No","Wire-break":"No","KC approval":"Yes","Spare fuses":"6.3 A / 250 V, quick-response, 5x 20 mm","UL approval":"Yes; File E239877","description":"SIPLUS S7-300 SM 322 8DA 48-125V based on 6ES7322-1CF00-0AA0 with conformal coating, -25…+70 °C, digital output isolated, 8 DQ, 48-125 V DC, 1.5 A, 1x 20-pole","For Uprating":"No","Short-circuit":"No","Shielded, Max.":"1 000 m","Weight, approx.":"250 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"2 ms","\"1\" To \"0\", Max.":"15 ms","Diagnostic alarm":"No","Power loss, typ.":"7.2 W","Rated value (DC)":"48 V; 48 V DC to 125 V DC","Unshielded, Max.":"600 m","On Lamp Load, Max.":"10 Hz","up to 40 °C, max.":"4 A","up to 50 °C, max.":"4 A","up to 60 °C, max.":"3 A","up to 70 °C, max.":"1 A","Fuse OK FSG (green)":"No","Between The Channels":"Yes","Diagnostics function":"No","For Signal \"1\", Min.":"L+ (-1.2 V)","Group error SF (red)":"Yes","Missing Load Voltage":"No","EAC (formerly Gost-R)":"Yes","Isolation tested with":"1 500 V AC","RCM (formerly C-TICK)":"Yes","Required Front Connector":"20-pin","Response threshold, typ.":"4.4 A","Short-circuit protection":"Yes; Electronic","Number of digital outputs":"8","With Inductive Load, Max.":"0.5 Hz","With Resistive Load, Max.":"25 Hz","For Signal \"1\" Rated Value":"1.5 A","Controlling a digital input":"Yes","Reverse polarity protection":"Yes; through fuse","Rated load voltage PWR (green)":"No","For Redundant Control Of A Load":"Yes; only outputs of the same group","from backplane bus 5 V DC, max.":"100 mA","Between The Channels, In Groups Of":"4","For Signal \"1\" Minimum Load Current":"10 mA","permissible range, lower limit (DC)":"40 V","permissible range, upper limit (DC)":"140 V","For Signal \"0\" Residual Current, Max.":"0.5 mA","Between The Channels And Backplane Bus":"Yes; Optocoupler","Status indicator digital output (green)":"Yes","from load voltage L+ (without load), max.":"2 mA","Installation altitude above sea level, max.":"2 000 m","Limitation of inductive shutdown voltage to":"M (-1 V)","For Signal \"1\" Permissible Surge Current, Max.":"3 A; for 10 ms","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)","for signal \"1\" permissible range for 0 to 40 °C, max.":"1.5 A","for signal \"1\" permissible range for 0 to 40 °C, min.":"10 mA","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,567.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c2ef1493d8a2510fb60adf3a1d72cdfa.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=106763&mlfb=6AG1322-1CF00-7AA0"},"ai":{"faq":[{"question":"What is the difference between 6AG1322-1CF00-7AA0 and 6ES7322-1CF00-0AA0?","answer":"The 6AG1322-1CF00-7AA0 is the SIPLUS extreme-temperature variant of the standard 6ES7322-1CF00-0AA0. The electrical specifications (48-125 VDC, 4 A per channel) and form factor are identical — the 6AG1322-1CF00-7AA0 is a drop-in replacement for the standard module in an existing S7-300 rack when the application requires extended temperature range or rail compliance."},{"question":"How do I get current pricing and availability for 6AG1322-1CF00-7AA0?","answer":"No stock-holding claim is made here; each order is sourced per the BOM requirement."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1322-1CF00-7AA0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1322-1CF00-7AA0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}