{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1522-1BF00-7AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1522-1BF00-7AB0","canonicalUrl":"https://aoctrl.com/siemens/6AG1522-1BF00-7AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1522-1BF00-7AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS S7-1500, 6AG1522-1BF00-7AB0, 8 digital transistor outputs, 24 V DC, 2 A per channel, 35 mm width.","salesMarkdown":"## Eight outputs in a 35 mm slice The 6AG1522-1BF00-7AB0: Eight transistor outputs on a 35 mm wide SIPLUS module for S7-1500, rated 2 A per channel with a module total of 16 A and per-group limit of 8 A. Short-circuit protection triggers at a typical 3 A, and each channel has a green status LED plus a red module diagnostic LED. No wire-break detection, but diagnostic alarms cover short-circuits and overloads. Fast startup completes in 500 ms, but isochronous mode is not supported — skip this if your application expects motion-sync timing. ## Panel fit and wiring limits Width 35 mm clips onto standard DIN rail; depth 129 mm and height 147 mm match the S7-1500 profile. The backplane draws 40 mA with no outputs active, and typical power loss is 5.6 W under load. Isolation tested at 707 V DC between channels. Use shielded cable up to 1 000 m or unshielded up to 600 m for digital signals.","metaTitle":"6AG1522-1BF00-7AB0 SIPLUS S7-1500 DO 8x24VDC/2A, 35mm","metaDescription":"Siemens SIPLUS S7-1500 digital output module 6AG1522-1BF00-7AB0: 8 transistor outputs, 2 A per channel, 24 V DC, diagnostic alarms, 35 mm width. Current lifecycle. RFQ for sourcing","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"Depth":"129 mm","Width":"35 mm","title":"6AG1522-1BF00-7AB0","Height":"147 mm","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","ERROR LED":"Yes; red LED","Fuse blown":"No","Wire-break":"No","Lower Limit":"12 Ω","Upper Limit":"4 kΩ","description":"SIPLUS S7-1500 DQ 8x24VDC/2A based on 6ES7522-1BF00-0AB0 with conformal coating, -40…+70 °C, digital output module, 8 channels in groups of 8; 8 A per group; diagnostics; substitute value","Fast startup":"Yes; 500 ms","For Uprating":"No","Short-circuit":"Yes","Shielded, Max.":"1 000 m","For Logic Links":"Yes","Weight, approx.":"240 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"100 µs","\"1\" To \"0\", Max.":"500 µs","Diagnostic alarm":"Yes","Isochronous mode":"No","Power loss, typ.":"5.6 W","Rated value (DC)":"24 V","Unshielded, Max.":"600 m","On Lamp Load, Max.":"10 Hz","Between The Channels":"Yes","Diagnostics function":"Yes","For Signal \"1\", Min.":"L+ (-0.8 V)","Isolation tested with":"707 V DC (type test)","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; red LED","Type of digital output":"Transistor","Current per group, max.":"8 A; note derating data in the manual","For Channel Diagnostics":"Yes; red LED","Current per module, max.":"16 A; note derating data in the manual","Response threshold, typ.":"3 A","Short-circuit protection":"Yes","Current consumption, max.":"40 mA; 20 mA per group, no output is activated.","Current per channel, max.":"2 A; note derating data in the manual","Number of digital outputs":"8; > +60 °C Number of simultaneously controllable outputs max. 8x 0.5 A, max. total current per group 2 A","With Inductive Load, Max.":"0.5 Hz; According to IEC 60947-5-1, DC-13","With Resistive Load, Max.":"100 Hz","Between Different Circuits":"75 V DC/60 V AC","For Signal \"1\" Rated Value":"2 A","Vertical Installation, Max.":"40 °C; = Tmax","Vertical Installation, Min.":"-40 °C; = Tmin","Horizontal Installation, Max.":"70 °C; = Tmax; > +60 °C Number of simultaneously controllable outputs max. 8x 0.5 A, max. total current per group 2 A","Horizontal Installation, Min.":"-40 °C; = Tmin (incl. condensation/frost)","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Suitable for safety functions":"No","For Redundant Control Of A Load":"Yes","Digital outputs, parameterizable":"Yes","Between The Channels, In Groups Of":"4","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.5 mA","Between The Channels And Backplane Bus":"Yes","For Signal \"1\" Permissible Range, Max.":"2.4 A","Power available from the backplane bus":"0.9 W","Monitoring of the supply voltage (PWR-LED)":"Yes; green LED","Installation altitude above sea level, max.":"5 000 m","Limitation of inductive shutdown voltage to":"-17 V","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d514ad7a74293573b2581a6572e56d71.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=122328&mlfb=6AG1522-1BF00-7AB0"},"ai":{"faq":[{"question":"What are the key dimensions of this module?","answer":"Width 35 mm, height 147 mm, depth 129 mm — standard DIN rail mount."},{"question":"Does this module support isochronous (motion-sync) mode?","answer":"No. Isochronous mode is not supported, so it is not suitable for synchronized motion applications."},{"question":"What is the maximum current per channel and per module?","answer":"2 A per channel, 8 A per group, and 16 A total module current. Derating applies above 60 °C — consult the manual."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1522-1BF00-7AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1522-1BF00-7AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}