{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1522-1BH01-7AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1522-1BH01-7AB0","canonicalUrl":"https://aoctrl.com/siemens/6AG1522-1BH01-7AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1522-1BH01-7AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS S7-1500 digital output module, 16 channels, 24 V DC transistor, DQ Yes / MSO Yes / PWM No, 129 x 35 x 147 mm.","salesMarkdown":"The Siemens 6AG1522-1BH01-7AB0 is a SIPLUS S7-1500 digital output module providing 16 transistor outputs at 24 V DC. It supports MSO and carries full diagnostics — channel status, wire-break, short-circuit, and a diagnostic alarm — with isochronous mode for deterministic update cycles. The isolation is type-tested at 707 V DC, giving line-to-ground separation that holds up in mixed-voltage panels. Output transistors switch on in under 100 µs and off in under 500 µs, making this module suitable for fast solenoid banks or indicator arrays. Power draw is 2 W typical, and the backplane current limit stays well within an S7-1500 CPU's budget. ## Comparison to the standard 6ES7522-1BH01-0AB0 The 6AG1522-1BH01-7AB0 is the SIPLUS extreme variant of the standard 6ES7522-1BH01-0AB0 output module. Electrically and mechanically identical — same footprint (35 mm wide), same M12 connector pinout, same diagnostic functions — but the SIPLUS version is built for extended ambient temperatures and corrosive atmospheres. If your panel is in a climate-controlled cabinet the 6ES7 variant suffices; for unheated enclosures, washdown zones, or high-humidity installations, this SIPLUS module keeps the line running.","metaTitle":"Siemens 6AG1522-1BH01-7AB0 SIPLUS S7-1500 DQ 16, 24 V DC","metaDescription":"SIPLUS S7-1500 digital output module, 16 channels 24 V DC transistor outputs with diagnostics and MSO support. Active production, order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"DQ":"Yes","MSO":"Yes","PWM":"No","Depth":"129 mm","Width":"35 mm","Height":"147 mm","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","ERROR LED":"Yes; red LED","Wire-break":"Yes","Group error":"Yes","Lower Limit":"48 Ω","Upper Limit":"12 kΩ","For Uprating":"No","Oversampling":"No","Short-circuit":"Yes","Shielded, Max.":"1 000 m","For Logic Links":"Yes","Weight, approx.":"230 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"100 µs","\"1\" To \"0\", Max.":"500 µs","Current-sourcing":"Yes","Diagnostic alarm":"Yes","Isochronous mode":"Yes","Power loss, typ.":"2 W","Rated value (DC)":"24 V","Unshielded, Max.":"600 m","FW update possible":"Yes","On Lamp Load, Max.":"10 Hz","Prioritized startup":"Yes","Between The Channels":"No","Diagnostics function":"Yes","For Signal \"1\", Min.":"L+ (-0.8 V)","Isolation tested with":"707 V DC (type test)","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; red LED","Type of digital output":"Transistor","Current per group, max.":"4 A; see additional description in the manual","For Channel Diagnostics":"Yes; red LED","Current per module, max.":"8 A; see additional description in the manual","Response threshold, typ.":"1 A","Short-circuit protection":"Yes; Clocked electronically","Current consumption, max.":"30 mA","Current per channel, max.":"0.5 A; see additional description in the manual","Number of digital outputs":"16","With Inductive Load, Max.":"0.5 Hz; According to IEC 60947-5-1, DC-13","With Resistive Load, Max.":"100 Hz","Bus cycle time (TDP), min.":"250 µs","For Signal \"1\" Rated Value":"0.5 A","Controlling a digital input":"Yes","Reverse polarity protection":"Yes; through internal protection with 7 A per group","Horizontal Installation, Max.":"70 °C; = Tmax; see Derating BasedOn (e.g. manual), additionally Tmax > 60 °C max. aggregate current 2 A per group","Horizontal Installation, Min.":"-40 °C; = Tmin (incl. condensation/frost)","Monitoring the supply voltage":"Yes","Substitute values connectable":"Yes","Suitable for safety functions":"No","DQ with energy-saving function":"No","For Redundant Control Of A Load":"Yes","Digital outputs, parameterizable":"Yes","Between The Channels, In Groups Of":"8","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.5 mA","Between The Channels And Backplane Bus":"Yes","For Signal \"1\" Permissible Range, Max.":"0.5 A","Power available from the backplane bus":"1.1 W","Execution and activation time (TCO), min.":"70 µs","Monitoring of the supply voltage (PWR-LED)":"Yes; green LED","Installation altitude above sea level, max.":"5 000 m","Limitation of inductive shutdown voltage to":"L+ (-53 V)","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$316.23","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=752567&mlfb=6AG1522-1BH01-7AB0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6AG1522-1BH01-7AB0/alternatives.json"},"ai":{"faq":[{"question":"What is the closest functional second-source to this module?","answer":"The standard Siemens S7-1500 digital output module 6ES7522-1BH01-0AB0 is electrically and mechanically identical, but intended for standard (non-extended) environmental conditions. The 6AG1 SIPLUS version adds ruggedization for harsh environments."},{"question":"Will this module drop into a panel wired for the 6ES7522-1BH01-0AB0 without rewiring?","answer":"Yes, the form factor, connector, and electrical interface are identical. You can swap a standard module for this SIPLUS module in the same slot without changing wiring or configuration."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1522-1BH01-7AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1522-1BH01-7AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}