{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1526-2BF00-2AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1526-2BF00-2AB0","canonicalUrl":"https://aoctrl.com/siemens/6AG1526-2BF00-2AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1526-2BF00-2AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS S7-1500 F-DQ 8x24VDC/2A digital output module, order code 6AG1526-2BF00-2AB0, 8 channels, 2 A per channel, total 8 A, conformal coating, SIL 3 / PL e, active production.","salesMarkdown":"## What this module is — and why the coating matters The 6AG1526-2BF00-2AB0: This is the SIPLUS variant of the standard S7-1500 F-DQ 8x24VDC/2A safety digital output module (6ES7526-2BF00-0AB0), with conformal coating and an extended -30 °C to +60 °C operating range. It delivers eight 24 V DC transistor outputs at 2 A per channel, with the full module rated at 8 A continuously up to 60 °C — no derating needed in warm panels. The safety function reaches SIL 3 (IEC 61508) and PL e (ISO 13849-1). ## What the headline ratings tell a sourcing buyer Per-channel current: 2 A at 24 V DC, typical response threshold at 2.9 A triggers overload protection. Lamp load switching is limited to 10 Hz; inductive loads need proper flyback suppression, but that's standard practice with any transistor output. Diagnostics cover wire-break, short-circuit, and open-circuit detection — each channel gets a green status LED, and the module reports group error via the red LED. I&M data (0 to 3) is supported, and firmware updates are field-applicable. The conformal coating on this SIPLUS variant protects against corrosive gases and condensation. If your panel environment doesn't require that, the standard non-coated module (6ES7526-2BF00-0AB0) is a functional match without the extended temperature rating. No other direct second-source carries both the safety F-rating and the coating; the module is a single-source part for that combination. ## Mechanical fit and panel considerations Width 35 mm, height 147 mm, depth 129 mm — occupies one single-width slot on the S7-1500 rail. Shielded cable length up to 1 000 m, unshielded 500 m. On the backplane, dissipates 11 W typical. Isolation tested at 707 V DC type test.","metaTitle":"Siemens 6AG1526-2BF00-2AB0 SIPLUS S7-1500 F-DQ 8x24VDC/2A","metaDescription":"SIPLUS S7-1500 F digital output module, 8 channels 24 V DC 2 A, conformal coating, -30…+60 °C, current production. Sourced to order. RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Digital Output Modules"],"specifications":{"DQ":"Yes","Depth":"129 mm","Width":"35 mm","Height":"147 mm","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","ERROR LED":"Yes; red LED","Wire-break":"Yes","Group error":"Yes","Lower Limit":"12 Ω","Upper Limit":"2 000 Ω","Short-circuit":"Yes","Shielded, Max.":"1 000 m","Current-sinking":"Yes","Weight, approx.":"300 g","lifecycle_stage":"current","Current-sourcing":"Yes","Diagnostic alarm":"Yes","Power loss, typ.":"11 W","Rated value (DC)":"24 V","Unshielded, Max.":"500 m","Automatic encoding":"Yes","FW update possible":"Yes","On Lamp Load, Max.":"10 Hz","up to 40 °C, max.":"8 A","up to 60 °C, max.":"8 A","Overload protection":"Yes","Between The Channels":"No","Diagnostics function":"Yes","For Signal \"1\", Min.":"24 V; L+ (-0.5 V)","Isolation tested with":"707 V DC (type test)","SIL acc. to IEC 61508":"SIL 3","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; red LED","Open-circuit detection":"Yes","Type of digital output":"Transistor","For Channel Diagnostics":"Yes; red LED","Response threshold, typ.":"2.9 A","Short-circuit protection":"Yes","Current per channel, max.":"2 A","Number of digital outputs":"8","With Inductive Load, Max.":"0.1 Hz","With Resistive Load, Max.":"30 Hz","For Signal \"1\" Rated Value":"2 A","Reverse polarity protection":"Yes","Vertical Installation, Max.":"40 °C; = Tmax","Vertical Installation, Min.":"-30 °C; = Tmin","Horizontal Installation, Max.":"60 °C; = Tmax","Horizontal Installation, Min.":"-30 °C; = Tmin (incl. condensation/frost)","Monitoring the supply voltage":"Yes","Substitute values connectable":"No","Suitable for safety functions":"Yes","Address space per module, max.":"6 byte","Electronic coding element type F":"Yes","Current consumption (rated value)":"110 mA; without load","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","For Signal \"0\" Residual Current, Max.":"0.5 mA; Current-sourcing, or current sourcing and sinking switches individually, current sinking: max. 1 mA","Between The Channels And Backplane Bus":"Yes","Power available from the backplane bus":"0.8 W","Monitoring of the supply voltage (PWR-LED)":"Yes","Performance level according to ISO 13849-1":"PLe","Installation altitude above sea level, max.":"2 000 m","Limitation of inductive shutdown voltage to":"PM-switching: -24 V + (-47 V), PP-switching: -24 V","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","Low demand mode: PFDavg in accordance with SIL3":"< 6.00E-05","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)","High demand/continuous mode: PFH in accordance with SIL3":"< 2.00E-09 1/h","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=1027339&mlfb=6AG1526-2BF00-2AB0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6AG1526-2BF00-2AB0/alternatives.json"},"ai":{"faq":[{"question":"What are its key output ratings?","answer":"Eight digital outputs, 24 V DC, 2 A per channel, total module current 8 A up to 60 °C. Safety integrity: SIL 3 / PL e. Conformal coating for harsh environments."},{"question":"Can I use a standard S7-1500 output module as a drop-in replacement?","answer":"Standard modules (e.g., 6ES7522-1BH01-0AB0) lack the safety function (F) and conformal coating; they are not pin-for-pin compatible with this F-DQ module without wiring and configuration changes. For the exact F + coating combination, this SIPLUS part is the only direct option."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1526-2BF00-2AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1526-2BF00-2AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}