{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6AG1531-7KF00-7AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6AG1531-7KF00-7AB0","canonicalUrl":"https://aoctrl.com/siemens/6AG1531-7KF00-7AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6AG1531-7KF00-7AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIPLUS 6AG1531-7KF00-7AB0, analog input module for S7-300, supports PTC, Pt100, Ni100, Pt1000, thermocouples, 35 mm width, 147 mm height, 129 mm depth.","salesMarkdown":"## SIPLUS analog input for S7-300 – sensor coverage and precision Siemens SIPLUS 6AG1531-7KF00-7AB0 analog input module (current) accepts PTC, Pt100, Ni100, Pt1000, Ni1000, and thermocouples B/E/J/K/N/R/S/T. Voltage ranges: -10 V to +10 V, -20 mA to +20 mA, 0-20 mA, 4-20 mA, -50 mV to +50 mV. For high-speed machine tool thermal mapping, the additional error at 2.5 ms integration time is the figure to watch: ±1 K on type K thermocouple, ±0.08 K on Pt100 climate, or ±0.02 % of voltage span on the ±250 mV range. That holds the deterministic repeatability needed for closed-loop thermal compensation. Wire-break detection is active on 1-5 V, 4-20 mA, thermocouple, resistance, and RTD signals – a standard diagnostic for line-down fault isolation. ## Integration – dimensions, wiring, and signal conditioning Maximum shielded cable lengths: 800 m for voltage/current inputs, 200 m for resistance and RTD, 50 m for thermocouples. Run the TC wiring short to keep the cold junction stable; shield grounded at the panel end only. Status indication via green RUN LED and red ERROR LED; I&M data up to I&M3 for asset tracking during BOM freeze audits. Lifecycle stage is current; no end-of-life notice issued.","metaTitle":"Siemens 6AG1531-7KF00-7AB0 Analog Input Module, PTC, RTD","metaDescription":"Active-production SIPLUS analog input for S7-300, supporting PTC, Pt100, Ni100, and thermocouples. Depth 129 mm. Source to order via RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog Input Modules"],"specifications":{"PTC":"Yes","Depth":"129 mm","Note:":"Additional basic error and noise for integration time = 2.5 ms: Voltage: ±250 mV (±0.02%), ±80 mV (±0.05%), ±50 mV (±0.05%); resistance: 150 ohms ±0.02%; resistance thermometer: Pt100 climate: ±0.08 K, Ni100 climate: ±0.08 K; thermocouple: Type B, R, S: ±3 K, type E, J, K, N, T: ±1 K","Width":"35 mm","title":"6AG1531-7KF00-7AB0","Height":"147 mm","Ni 100":"Yes; Standard/climate","Pt 100":"Yes; Standard/climate","Pt 200":"Yes; Standard/climate","Pt 500":"Yes; Standard/climate","Type B":"Yes","Type E":"Yes","Type J":"Yes","Type K":"Yes","Type N":"Yes","Type R":"Yes","Type S":"Yes","Type T":"Yes","Ni 1000":"Yes; Standard/climate","Pt 1000":"Yes; Standard/climate","RUN LED":"Yes; green LED","I&M data":"Yes; I&M0 to I&M3","ERROR LED":"Yes; red LED","0 to 20 mA":"Yes","1 V to 5 V":"Yes","LG-Ni 1000":"Yes; Standard/climate","Wire-break":"Yes; Only for 1 to 5 V, 4 to 20 mA, TC, R, and RTD","description":"SIPLUS S7-1500 AI 8xU/I/RTD/TC based on 6ES7531-7KF00-0AB0 with conformal coating, -40…+70 °C, analog input module 16-bit resolution, accuracy 0.3%, 8 channels in groups of 8, 4 channels for RTD measurement, common mode voltage 10 V; diagnostics; hardware interrupts including infeed element, shielding bracket and shield terminal","-1 V to +1 V":"Yes","-5 V to +5 V":"Yes","0 To 150 Ohms":"Yes","0 To 300 Ohms":"Yes","0 To 600 Ohms":"Yes","4 mA to 20 mA":"Yes","-10 V to +10 V":"Yes","0 To 6000 Ohms":"Yes","Shielded, Max.":"800 m; for U/I, 200 m for R/RTD, 50 m for TC","Weight, approx.":"200 g","lifecycle_stage":"current","-2.5 V to +2.5 V":"Yes","-20 mA to +20 mA":"Yes","-50 mV to +50 mV":"Yes","-80 mV to +80 mV":"Yes","Diagnostic alarm":"Yes","Power loss, typ.":"2.7 W","Rated value (DC)":"24 V","Limit value alarm":"Yes; two upper and two lower limit values in each case","-250 mV to +250 mV":"Yes","-500 mV to +500 mV":"Yes","Overflow/underflow":"Yes","Between The Channels":"No","Diagnostics function":"Yes","Output current, max.":"53 mA","Isolation tested with":"707 V DC (type test)","Channel status display":"Yes; green LED","For Module Diagnostics":"Yes; red LED","Input resistance (PTC)":"10 MΩ","For Channel Diagnostics":"Yes; red LED","For Voltage Measurement":"Yes","For current measurement":"8","For voltage measurement":"8","Number of analog inputs":"8; > +60 °C max. 2x ±20 mA or 4x ±10 V or 4x RTD permissible","Short-circuit protection":"Yes","between the inputs (UCM)":"20 V DC","Common mode voltage, max.":"10 V","Input resistance (Ni 100)":"10 MΩ","Input resistance (Pt 100)":"10 MΩ","Input resistance (Pt 200)":"10 MΩ","Input resistance (Pt 500)":"10 MΩ","Input resistance (Type B)":"10 MΩ","Input resistance (Type E)":"10 MΩ","Input resistance (Type K)":"10 MΩ","Input resistance (Type N)":"10 MΩ","Input resistance (Type R)":"10 MΩ","Input resistance (Type S)":"10 MΩ","Input resistance (Type T)":"10 MΩ","Input resistance (type J)":"10 MΩ","Input resistance (Ni 1000)":"10 MΩ","Input resistance (Pt 1000)":"10 MΩ","Calibration possible in RUN":"Yes","Vertical Installation, Max.":"40 °C; = Tmax","Vertical Installation, Min.":"-40 °C; = Tmin","For thermocouple measurement":"8","Horizontal Installation, Max.":"70 °C; = Tmax","Horizontal Installation, Min.":"-40 °C; = Tmin (incl. condensation/frost)","Input resistance (0 to 20 mA)":"25 Ω; Plus approx. 42 ohms for overvoltage protection by PTC","Input resistance (1 V to 5 V)":"100 kΩ","Input resistance (LG-Ni 1000)":"10 MΩ","Monitoring the supply voltage":"Yes","Common mode interference, min.":"60 dB","Input resistance (-1 V to +1 V)":"10 MΩ","Input resistance (-5 V to +5 V)":"100 kΩ","Input resistance (0 to 150 ohms)":"10 MΩ","Input resistance (0 to 300 ohms)":"10 MΩ","Input resistance (0 to 600 ohms)":"10 MΩ","Input resistance (4 mA to 20 mA)":"25 Ω; Plus approx. 42 ohms for overvoltage protection by PTC","Between the inputs and MANA (UCM)":"10 V DC","Input resistance (-10 V to +10 V)":"100 kΩ","Input resistance (0 to 6000 ohms)":"10 MΩ","Between The Channels, In Groups Of":"8","Burden of 2-wire transmitter, max.":"820 Ω","Crosstalk between the inputs, min.":"-80 dB","Reparameterization possible in RUN":"Yes","Input resistance (-2.5 V to +2.5 V)":"10 MΩ","Input resistance (-20 mA to +20 mA)":"25 Ω; Plus approx. 42 ohms for overvoltage protection by PTC","Input resistance (-50 mV to +50 mV)":"10 MΩ","Input resistance (-80 mV to +80 mV)":"10 MΩ","between M internally and the inputs":"75 V DC/60 V AC (base isolation)","permissible range, lower limit (DC)":"19.2 V","permissible range, upper limit (DC)":"28.8 V","Input resistance (-250 mV to +250 mV)":"10 MΩ","Input resistance (-500 mV to +500 mV)":"10 MΩ","Between The Channels And Backplane Bus":"Yes","Power available from the backplane bus":"0.7 W","Current, relative to input range, (+/-)":"0.1 %","Voltage, relative to input range, (+/-)":"0.1 %","external temperature compensation via RTD":"Yes","Monitoring of the supply voltage (PWR-LED)":"Yes; green LED","Resistance, relative to input range, (+/-)":"0.1 %","Installation altitude above sea level, max.":"5 000 m","For Current Measurement As 2-Wire Transducer":"Yes","For Current Measurement As 4-Wire Transducer":"Yes","Thermocouple, relative to input range, (+/-)":"Type B: > 600 °C ±1.7 K, type E: > -200 °C ±0.7 K, type J: > -210 °C ±0.8 K, type K: > -200 °C ±1.2 K, type N: > -200 °C ±1.2 K, type R: > 0 °C ±1.9 K, type S: > 0 °C ±1.9 K, type T: > -200 °C ±0.8 K","Protection against fouling acc. to EN 60664-3":"Yes; Type 1 protection","Linearity error (relative to input range), (+/-)":"0.02 %","For resistance/resistance thermometer measurement":"4","Compensation for 0 °C reference point temperature":"Yes; fixed value can be set","Temperature error (relative to input range), (+/-)":"0.005 %/K; With TC type T 0.02 ± % / K","For Resistance Measurement With Two-Wire Connection":"Yes; Only for PTC","Ambient air temperature-barometric pressure-altitude":"Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)","For Resistance Measurement With Four-Wire Connection":"Yes; All measuring ranges except PTC","Resolution with overrange (bit including sign), max.":"16 bit","For Resistance Measurement With Three-Wire Connection":"Yes; All measuring ranges except PTC; internal compensation of the cable resistances","Technical unit for temperature measurement adjustable":"Yes; °C/°F/K","Resistance thermometer, relative to input range, (+/-)":"Ptxxx standard: ±0.7 K, Ptxxx climate: ±0.2 K, Nixxx standard: ±0.3 K, Nixxx climate: ±0.15 K","STEP 7 TIA Portal configurable/integrated from version":"see entry ID: 109746275","Resistant to commercially available coolants and lubricants":"Yes; Incl. diesel and oil droplets in the air","Between The Channels And The Power Supply Of The Electronics":"Yes","Permissible Input Current For Current Input (Destruction Limit), Max.":"40 mA","Permissible Input Voltage For Voltage Input (Destruction Limit), Max.":"28.8 V","Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)":"0.02 %","Series mode interference (peak value of interference < rated value of input range), min.":"40 dB","Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04":"Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)","Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A":"Yes; Conformal coating, Class A"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/8dd2f386b8f026d5af91c256423cdbd3.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=276513&mlfb=6AG1531-7KF00-7AB0"},"ai":{"faq":[{"question":"Does this module support PTC sensors?","answer":"Yes, PTC sensor support is confirmed."},{"question":"What is the physical depth of the module?","answer":"129 mm depth, plus DIN-rail clearance."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6AG1531-7KF00-7AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6AG1531-7KF00-7AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}