{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7124-1GA00-0AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7124-1GA00-0AB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7124-1GA00-0AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7124-1GA00-0AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens 6ES7124-1GA00-0AB0 SIMATIC SC electronic submodule, 1 analog output, 4-20 mA / 0-20 mA, 24 V DC, 51 mm depth, 20 mm width, 64 mm height.","salesMarkdown":"## Single-channel analog output for SIMATIC SC racks The 6ES7124-1GA00-0AB0 is a SIMATIC SC electronic submodule carrying one analog output channel configurable for 0 to 20 mA or 4 to 20 mA current loops. It occupies two slots from a maximum of eight in the rack, so plan the I/O count around that footprint. Rated supply is 24 V DC, drawing up to 50 mA from the L+ rail, with reverse polarity protection on the input side. ## Load drive and wiring constraints Maximum load resistance is 600 Ω at 0 V common-mode voltage, dropping to 500 Ω at 2 V common-mode — the lower figure governs if the field wiring shares a return with other loops. The output handles inductive loads up to 1 mH and capacitive loads with a 0.5 ms time constant for inductive, 0.1 ms for resistive. No-load voltage at the current output terminals reaches 16 V max; the output can drive a two-wire transmitter connection directly. ## Accuracy and resolution for loop tuning Resolution is 12 bits in S5 representation or the full S7 range for 0-20 mA / 4-20 mA, with a conversion time of 5 ms per channel. Repeat accuracy at 25 °C is ±0.1 % of output range, linearity error ±0.06 %, and temperature drift ±0.01 %/K — tight enough for most process loops but not precision metrology. Common-mode rejection is 30 dB minimum at 50 Hz; the channel-to-backplane isolation uses an optocoupler, tested at 1500 V AC. ## Panel fit and terminal block Dimensions are 20 mm wide, 64 mm high, 51 mm deep — it fits a standard SIMATIC SC slot without overhang.","metaTitle":"Siemens 6ES7124-1GA00-0AB0 SIMATIC SC Analog Output Module","metaDescription":"Siemens 6ES7124-1GA00-0AB0 SIMATIC SC electronic submodule, 1 analog output, 4-20 mA / 0-20 mA. Active production. Quoted to order against BOM quantities.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Analog Output Modules"],"specifications":{"Depth":"51 mm","Width":"20 mm","Alarms":"No","Height":"64 mm","0 to 20 mA":"Yes","4 mA to 20 mA":"Yes","Current, max.":"50 mA; DC","Required Slots":"2; from 8","Shielded, Max.":"200 m","Weight, approx.":"25 g","lifecycle_stage":"current","Power loss, max.":"1 W","Rated value (DC)":"24 V","For Inductive Load":"0.5 ms","For Resistive Load":"0.1 ms","Diagnostics function":"No","Isolation tested with":"1 500 V AC","Usable terminal block":"TB 16SC","Number of analog outputs":"1","With Current Outputs, Max.":"600 Ω; at common-mode voltage 2 V, max. 500 ohms; at common-mode voltage 0 V, max. 600 ohms; idle test","Reverse polarity protection":"Yes","Resolution (incl. overrange)":"S7 representation: 0 mA to 20 mA, 4 mA to 20 mA; S5 representation: 12 bit, 12 bit","from supply voltage L+, max.":"50 mA","Conversion time (per channel)":"5 ms","Substitute values connectable":"No","Voltages at the outputs towards MANA":"15 V; max. 15 V continuous; 75 V for max. 1 s (mark to space ratio 1:20)","Current output, no-load voltage, max.":"16 V","Between The Channels And Backplane Bus":"No; Optocoupler","For Current Output Two-Wire Connection":"Yes","Current, relative to output range, (+/-)":"0.7 %","With Current Outputs, Inductive Load, Max.":"1 mH","between reference point of load and QV-(UCM)":"2 V DC / 2 Vpp AC","Linearity error (relative to output range), (+/-)":"0.06 %","Temperature error (relative to output range), (+/-)":"0.01 %/K","Resolution with overrange (bit including sign), max.":"12 bit","Common mode interference (UCM < Vss AC (50 Hz)), min.":"30 dB","Between The Channels And The Power Supply Of The Electronics":"No","Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)":"0.1 %"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$848.36","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=342875&mlfb=6ES7124-1GA00-0AB0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7124-1GA00-0AB0/alternatives.json"},"ai":{"faq":[{"question":"How can I order the 6ES7124-1GA00-0AB0 for a BOM quantity?","answer":"This part is quoted to order against your BOM quantity through independent distribution."},{"question":"What is the maximum cable length for the analog output?","answer":"Shielded cable runs up to 200 m are supported for the current output."},{"question":"Does this module support diagnostics or substitute values?","answer":"No — the module has no diagnostics function and substitute values are not connectable. Alarms are also not supported."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7124-1GA00-0AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7124-1GA00-0AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}