{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-1BH00-0XB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-1BH00-0XB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-1BH00-0XB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-1BH00-0XB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens SIMATIC ET 200S, Digital Output Module, 16 outputs, 24 V DC, 4 A total current, IP20.","salesMarkdown":"## 16 outputs, 24 VDC, with derating that governs real load The Siemens 6ES7132-1BH00-0XB0 is a SIMATIC ET 200S digital output module packing 16 channels at 24 VDC nominal, with a total current ceiling of 4 000 mA up to 30 °C — that is 250 mA per channel if evenly loaded, but the real limit is the module total, not per-point. Above 30 °C the total drops to 2 A at 40 °C and 2 000 mA at 60 °C, so an enclosure running warm forces a load rebalance or a second module. The module fits a 145 mm wide by 60 mm tall by 60.5 mm deep footprint — standard ET 200S slice dimensions that slot into the DIN-rail mounted terminal block assembly. ## Switching speed, protection, and wiring constraints Outputs switch on in 50 µs max and off in 200 µs max, fast enough for most valve and contactor banks but not for high-speed indexing — the 100 Hz resistive load limit and 0.5 Hz inductive load ceiling confirm this is a general-purpose block, not a high-speed cam output. Short-circuit protection is built in, with a response threshold of 0.7 A typ, and the module signals diagnostics via the bus fault BF (red) LED. Reverse polarity protection is included on the supply, and the module draws 70 mA max from the backplane bus (L4+/L5+). Cable runs: shielded up to 1 000 m, unshielded up to 600 m — the unshielded figure is the one that bites in a noisy cabinet if you skip the screen termination.","metaTitle":"Siemens 6ES7132-1BH00-0XB0 Digital Output Module, 16 DO","metaDescription":"Siemens 6ES7132-1BH00-0XB0 SIMATIC ET 200S digital output module, 16 outputs, 24 VDC, 4 A total current, IP20, current lifecycle stage, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Digital Output Modules"],"specifications":{"Depth":"60.5 mm","Width":"145 mm","Alarms":"No","Height":"60 mm","Lower Limit":"41 Ω","Upper Limit":"28 000 Ω","For Uprating":"No","Shielded, Max.":"1 000 m","Operation, max.":"95 %; RH class 2 in accordance with IEC 1131-2","Operation, min.":"5 %","SYNC capability":"Yes","Weight, approx.":"130 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"50 µs","\"1\" To \"0\", Max.":"200 µs","Power loss, typ.":"5 W","Rated value (DC)":"24 V","Unshielded, Max.":"600 m","Bus fault BF (red)":"Yes","On Lamp Load, Max.":"8 Hz","up to 30 °C, max.":"4 000 mA","up to 40 °C, max.":"2 A","up to 60 °C, max.":"2 000 mA","Between The Channels":"No","Diagnostics function":"Yes","For Signal \"1\", Min.":"Ua - 3 V","Isolation tested with":"500 V DC","Usable terminal block":"TB 16L","IP degree of protection":"IP20","Transmission rate, max.":"1.5 Mbit/s","Response threshold, typ.":"0.7 A","Short-circuit protection":"Yes","Number of digital outputs":"16","With Inductive Load, Max.":"0.5 Hz","With Resistive Load, Max.":"100 Hz","Controlling a digital input":"Yes","Reverse polarity protection":"Yes","from supply voltage L+, max.":"70 mA; L4+ / L5+","Horizontal Installation, Max.":"60 °C; 40°C for other mountings","Horizontal Installation, Min.":"0 °C","Permissible Range, Lower Limit":"795 hPa","Permissible Range, Upper Limit":"1 080 hPa","For Redundant Control Of A Load":"Yes; only outputs of the same group","Bus protocol/transmission protocol":"PROFIBUS DP","tested according to IEC 60068-2-27":"Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms","between the channels and PROFIBUS DP":"Yes; Optocoupler","For Signal \"0\" Residual Current, Max.":"1 mA","For Signal \"1\" Permissible Range, Max.":"0.5 A","For Signal \"1\" Permissible Range, Min.":"1 mA","Status indicator digital output (green)":"Yes","Mains/voltage failure stored energy time":"20 ms","Monitoring 24 V voltage supply ON (green)":"Yes","from load voltage L+ (without load), max.":"50 mA; Per load group (L1+ or L2+ / L3+)","Limitation of inductive shutdown voltage to":"Typ. (L1+ or L2+ / L3+) -55 V","Operation, tested according to IEC 60068-2-6":"Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g)","Direct data exchange (slave-to-slave communication)":"Yes; Transmitter (for digital outputs and hybrid modules ET 200L: not for L-SC or IM-SC)","between PROFIBUS DP and all other circuit components":"Yes","Design of electrical connection for the inputs and outputs":"Screw-type and spring-loaded terminals, permanent wiring; standard: 2-wire connection, optional: 3 and 4-wire connection"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$954.71","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=107041&mlfb=6ES7132-1BH00-0XB0","alternativesUrl":"https://aoctrl.com/api/mcp/products/6ES7132-1BH00-0XB0/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-1BH00-0XB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-1BH00-0XB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}