{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"6ES7132-4BB31-0AB0","brand":"Siemens","brandSlug":"siemens","productSlug":"6ES7132-4BB31-0AB0","canonicalUrl":"https://aoctrl.com/siemens/6ES7132-4BB31-0AB0","factsUrl":"https://aoctrl.com/api/mcp/products/6ES7132-4BB31-0AB0","rawCanonicalId":null},"summary":{"shortDescription":"Siemens ET 200S electronic module, 6ES7132-4BB31-0AB0, 2-channel source output (PNP), 2 A rated per channel, diagnostics per channel, wire-break and short-circuit detection.","salesMarkdown":"The Siemens 6ES7132-4BB31-0AB0 is a current-production ET 200S 2-channel source output module rated at 2 A per channel, drawing power from the 24 V DC backplane. It provides PNP (source) outputs, each capable of 2 A continuous with a maximum module current of 4 A. Response threshold for overcurrent is 4 A typical; short-circuit protection is channel-based and can be disabled/enabled via diagnostics. Diagnostics function detects wire-break (threshold 12 Ω to 3 400 Ω) and short-circuit per channel. On CPU/master STOP, the module can substitute a configured 0 or 1 value or keep the last value — deterministic behavior for fail-safe segments. Reverse voltage protection is present only when sharing the same load voltage as the power module. Polarity reversal can cause the outputs to be connected through; verify the rail topology before wiring. ## Physical Fit and Slot Allocation The module occupies a 15 mm wide slot on the ET 200S terminal block, with a depth of 52 mm and height of 81 mm. This width is the same as many 2-channel modules, so plan your I/O count and station bus length accordingly. Shielded cable runs up to 1 000 m and unshielded up to 600 m. Switching frequency on resistive load is 100 Hz; with inductive load (0,5 H) it drops to 2 Hz. Power loss is 1.4 W typ, minimal for thermal planning in dense cabinets.","metaTitle":"Siemens 6ES7132-4BB31-0AB0 ET 200S Digital Output Module, 2A","metaDescription":"Active Siemens 6ES7132-4BB31-0AB0 ET 200S digital output module. 2 source outputs at 2A rated each, channel diagnostics, wire-break/short-circuit detection. 52mm depth. Sourced to","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Digital Output Modules"],"specifications":{"Depth":"52 mm","Width":"15 mm","title":"6ES7132-4BB31-0AB0","Height":"81 mm","Remark":"3 byte","Wire-break":"Yes; channel by channel","Lower Limit":"12 Ω","Upper Limit":"3 400 Ω","description":"SIMATIC DP, 5 electronic modules for ET 200S, 2 DO High Feature 24 V DC/2 A, 15 mm width, Diagnostics short circuit and wire break, Substitute value output with LED SF (group fault) 5 units per packing unit","For Uprating":"No","With Packing":"2 bit","Short-circuit":"Yes; channel by channel","Shielded, Max.":"1 000 m","Weight, approx.":"40 g","lifecycle_stage":"current","\"0\" To \"1\", Max.":"100 µs","\"1\" To \"0\", Max.":"400 µs","Power loss, typ.":"1.4 W","Rated value (DC)":"24 V; From power module","Unshielded, Max.":"600 m","On Lamp Load, Max.":"10 Hz","Between The Channels":"No","Diagnostics function":"Yes","For Signal \"1\", Min.":"L+ (-1 V)","Group error SF (red)":"Yes","Isolation tested with":"500 V DC","Diagnostics wire break":"Disable / enable","Type of digital output":"Source output (PNP, current-sourcing)","Current per module, max.":"4 A","Response threshold, typ.":"4 A","Short-circuit protection":"Yes","Diagnostics short-circuit":"Disable / enable","Number of digital outputs":"2","With Inductive Load, Max.":"2 Hz; 0,5 H","With Resistive Load, Max.":"100 Hz","For Signal \"1\" Rated Value":"2 A","Reverse voltage protection":"Yes; when using the same load voltage as on the power module","Controlling a digital input":"Yes","Response to CPU/master STOP":"Substitute a value/keep last value","Reverse polarity protection":"Yes; polarity reversal can lead to the digital outputs being connected through","Substitute values connectable":"Yes; 0/1","Address space per module, max.":"1 byte","Diagnostic information readable":"Yes","For Redundant Control Of A Load":"Yes; per module","from backplane bus 3.3 V DC, max.":"10 mA","For Signal \"0\" Residual Current, Max.":"0.5 mA","Between The Channels And Backplane Bus":"Yes","For Signal \"1\" Permissible Range, Max.":"2.4 A","For Signal \"1\" Permissible Range, Min.":"7 mA","Status indicator digital output (green)":"Yes","from load voltage L+ (without load), max.":"5 mA; Per channel","Limitation of inductive shutdown voltage to":"-55 to -60 V, typ. L+( )"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$164.59 – $377.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/e5444c2a6d45e12e1a825e1259ff12c7.pdf","sourceUrl":"https://support.industry.siemens.com/webbackend/api/ProductSupport/TechnicalData?language=en&region=cn&productId=508396&mlfb=6ES7132-4BB31-0AB0"},"ai":{"faq":[{"question":"What are the key ratings for this output module?","answer":"It has 2 source outputs (PNP), each rated at 2 A continuous, supplied from the 24 V DC backplane. Total module current is 4 A max."},{"question":"What is the width and depth of this module?","answer":"Width is 15 mm, depth is 52 mm."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/siemens/6ES7132-4BB31-0AB0","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/siemens/6ES7132-4BB31-0AB0 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}